2006 - 2010 Dodge Charger / Magnum / Challenger Radio Install

[@ProvoBeastAudio]

Parts used linked in the description of the video!

[@shawnpattison8451]

Do all double dins fit I don't think the hole is tall enough for my DVD player?

[@PKGangsta18]

Can confirm this worked on my grandfather's 2006 Charger 3.5L. Thanks, bro. Thumbs up

[@michaelkey5417]

😊

[@bren_6137]

Wow,this looks like a pain in the ass

[@ronwheatley6773]

Thank you for explaining that. You've helped me big time. Keep the videos coming.

[@plattevalleyguideservice394]

I've been struggling on where to find switched power to power my stereo in my Challenger....didn't even think about the 12v plug. I'm going to look now, see if I can get it done. Thanks for addressing this.

[@thomasansley539]

I already have an aftermarket in there and I'm just upgrading to a touch screen one, hopefully I won't need to do all the soldering since it's already got an older aftermarket stereo 🤞

[@oscarlaguna3561]

The accessory wire is still conected to the harness n the stereo harnes then connected to the ligther wire

[@destinydoll1732]

Well explained very good video

[@jukericmoore4197]

I just put a new radio in my Dodge Challenger & the sound won’t play just power up nothing else

[@Formerlywarmer]

Did the harness last night about to plug it all up this morning. Thx

[@Mitchyymitchmobile]

Hey sir, you left out the fact that the charger Chrysler and magnum has a fuse in the truck that's optional to stay a constant or only on by key, a lot of ppl may run into that issue, but cool video bubba

[@jayssimplelife4554]

What fuse would that be need the info as I am doing in the morning my cigarette lighter does not turn off

[@Mitchyymitchmobile]

@@jayssimplelife4554 it’s the 10A fuse may be a 20 I forgot but it’s the only fuse that’s out of order from the others that’s the cigarette lighter fuse, if you remove it and put it in place it’ll be a constant and vice versa or the other way around I can’t remember

[@alexfuegomorado]

So of you remove it Will shut off when You remove the key from the ignition switch?

[@SkeliPopTA]

Where are the links for the wire harness you used for this?

[@hemi08911]

Hi great Video tutorial. I just purchased a Pioneer Double Din for my Charger. I originally had a 7in JVC DVD radio in it until someone broke in and stole it. The pioneer 2660nex is a little taller than the bezel. What would recommend I do to get it to fit properly?

[@gregsarro5839]

I short out my radio when installing dont forget to disconnect battery now my car charger is having an electrical issue it randomly dies about every 8 hours replaced battery and alternator

[@Redwing-jd8rf]

Great Video!! Thanks for the help

[@707thizzn]

Any way to fix the dash so it fits correctly?!? Im not liking how it sits

[@willnova6537]

Yes, there is a way to fix the dash. I did it on mine. Let me know if you still need assistance.

[@liviaskelton2746]

@@willnova6537 I need help with this my dash won’t line up with the dash kit

[@davidortiz6915]

Good afternoon everyone.im installing a aftermarket radio. How do I connect to the factory amp on a 2009 Challenger. I have power but no sound. Thank you for your time

[@fnkel5684]

did u figure it out

[@soufianDEMOS]

Great vid ! Would you know what android computer can replace the manufacture double din computer on my charger RT 07 ? Thank you

[@jessemclean3456]

Do I really need the ten amp fuse ?

[@redpilllife4life198]

Would this be the same for the srt8 that has the navigation screen?

[@berad187]

This gave me pretty good ideas because im looking forward on how ill be installing my double din stereo in my 07 charger sxt with the premium sound system that has a stock amp im dropping in a double din keenwood DDX418 dvd receiver

[@jasongarden1979]

did it work

[@berad187]

@@jasongarden1979 I finally got mine installed a few days back it wasn't that hard to install it all turned out pretty well no problems at all

[@mrmctiller3132]

@@berad187which harness did you use? Did you bypass the factory amp or keep it?

[@berad187]

@@mrmctiller3132 no I didn't I had baught one of them pricey harnesses honestly I had forgotten what that brand it was but it fully puts the factory amp to use with my double din stereo kenwood I think it was that scosch brand

[@mrmctiller3132]

@@berad187 ah ok. Are you using the factory speakers? I want to install nicer speakers, but I don't think the factory amp can power them.

[@Sweetchilliheat18]

How did you change the trim above the passenger glove box? Mine is peeling

[@kevinteran5624]

Can I use wire connectors instead of soldering them?

[@BigHemiNJ]

You could but as you probably know youll need to crimp them properly. I'd still recommend heatshrinking over the connectors to help them from coming loose.

[@Markygofficial151]

fire!! 🔥

[@surfingfire479]

Well what do u do with the other connections that was originally attached to the OEM radio? Do u just leave them unplugged and just plug in the antenna and one plug to the new radio?

[@sleepyafbawsawgntz2669]

Yup

[@sleepyafbawsawgntz2669]

They aren’t being used in the oem either at least they werent in mine. They were for an amp I didn’t have, a back up cam I didn’t have, stereo controls on the steering wheel that weren’t there and two subs it didn’t come with.

[@liviaskelton2746]

I need help figuring out how the dash sets over the radio dash kit? I can’t get my dash to sit right it won’t line up with the radio dash kit

[@TheHulk435]

My harness doesn't have yellow were can i possibly t tap it , I believe it's for memory and need consent power but not sure.. pls help THANKS

[@luckyrazrbk1]

I have a problem with mine. People that he the car before me cut the cig lighter plug off and tapped into it but the wires are dead with ignition on , fuse is still good though 😔

[@chrispain4767]

Hallo, bei einem Bekannten wurden alle Stecker abgeschnitten, haben sie ein Bild vom Stecker plus Belegung. Mfg

[@transformersopenbox]

I have a 2006 magnum rt, I was told that if I install aftermarket radio that it would kill the tv/dvd that is located between the drive and passenger seats. Is that true?

[@ThatCasinoLife]

Didn't say what she you connected the red wire to.. just showed it all wrapped up with the rest

[@ProvoBeastAudio]

Red wire (without using the proper smart harness) will tap into the positive wire of the power socket / cigarette lighter. If you use the correct smart harness, the red accessory is generated by the harness without need to go looking for it elsewhere.

[@ThatCasinoLife]

@@ProvoBeastAudio cool and thank you

[@1983randerson]

2010 Dodge Charger, my cigarette lighter is not switched with the ignition, where can I tap accessory power from?

[@Wrenchingdaily]

Fuse #18 (cigarette lighter circuit) in the trunk fuse panel is a selectable type circuit. It can either be constantly powered or switched accessory powered. The fuse position has three slots, if its constantly powered right now then all you have to do is remove the fuse a slide it over to the next slot which will make it switched powered when key is on.

[@SerenoOunce]

Tap into the +12 directly at the Ign switch

[@raidersperez1278]

My sister charger has like 3 connecters on her radio. Is there a kit for that?

[@michaelrhodes2666]

Man I have a 2005 dodge magnum an there was an after market stero all ready that worked great but wh3n the tire was low she used one of th3 pumps that aired up the tire from the cigretlighter qn it burnt up m3lted the two wires further back. Every thing stopped working so I went an bought q new touch screen the guy had all ready cut the wires qn did not do it the right way an use the install kits I got it where the in cash touch screen comes on col times it played music. But just for a quick sec. So what can I do to make this work like he had it I cut the wires that went to the cigretlighter all the way back to it stopped melting an wrapped them with tape an make sure I discounted the orange part from the cigretlighter so that would not happen again.i check all fuses is there any way I can hook a wire back in them or t b33nbr orange dimmer wire just to get some music it's been all week with no music at all. I just bought touch screen where I can blue tooth my phone with it an it has the radio an memory card an use port for ago that .But now just trying to get some music to my speakers .Man u can email me at [e-mail] or text 803 899 0453 any text u can kick me just to get the speakers working would be great they had it working till she plugged that in.if I could just find what wire to splice into what ever that would be great some how he was using the stock amp unless it's blown now .that will suck ...its a 05 magnum any help would be more then greatfull thanks again

[@lukesirois2108]

did an installation of a pioneer 1770 on the same charger. lost hvac controls (or perhaps just blower motor controls, who knows it won’t blow air) but control knobs still light up. ac and defrost buttons do not. fuses are all fine, any ideas as to how the hell i fucked that up?

[@renemartin4044]

Does the accessory wire need the 10amp fuse? Or can I use a wire without it and connect it to the cigarette lighter?

[@ProvoBeastAudio]

The right way is to add the smart harness required on this charger. That part is linked in the description.

[@tobroke2007]

ya i have a 2013 challenger with the factory amp i need the video showing what harness to get and how to wire it I bought a kenwood with a amp kit and everything turns on but no sound.

[@bardgettbrandy]

Some cars/trucks require a part to install an after market stereo. I'm blanking on the name of said part but Google it and say what do u need to install after market stereo in (YOUR vehicle) and besides a harness what else is needed. Me & my ex both had trailblazers a year apart(2002 & 2003) but there were so many differences bc his vehicle had onstar & buttons on steering wheel. So his issue was similar to yours that stereo powered on but no sound. He needed a $40 part to connect it all. Hope this helps if ur still trying

[@camposdavid0000]

My cigarette plug have constant power even when car off ... both the one with he ashtray and the one inside the center console. Both stay on when car off. Can't seem to find out why ..

[@anthonykosnik1662]

are you sure? the one in the dash stays on when you turn off the ignition but shuts off when you open the door

[@camposdavid0000]

@@anthonykosnik1662 yes stays on and the one inside the center console stays on when car is off , key is out and door is open. I think I'm just going to run a tap in fuse on the radio fuse to run the red wire to make the radio turn off when car goes off

[@Mount40Water]

What kind of radio is that ? I have 2010 charger as well

[@ProvoBeastAudio]

All parts listed in the description!

[@josuetrujillo5528]

I have the same model but I have the factory sub, I’m having trouble on finding a harness

[@operation6604]

Bypass it

[@julianmcneil733]

Were did you connect the red wire to the yellow wire ?

[@miked3366]

Whats the answer ? Because if you twist it with the yellow it will continue to kill your battery

[@johnsmith-qz4bv]

do you have a video on how to bypass a factory amp in a 07 dodge charger..?..how easy is it without the smart harrness.?..

[@ProvoBeastAudio]

Easy with the Metra 70-6514 Harness. All color coded, makes the install a breeze. amzn.to/3EpD58N

[@fnkel5684]

@@ProvoBeastAudio is it better to use thesmart harness or just bypass it

[@ProvoBeastAudio]

@@fnkel5684 Just depends - if your factory amp is giving you issues, then i'd go the bypass route. If your audio system seems to be working fine, then I'd recommend just keeping it as is, and using the correct smart harness.

[@unknowntravelers540]

Are they single or double d

[@johnsmith-qz4bv]

can u add a factory amp to your charger if it dont have one....?.

[@ProvoBeastAudio]

It would be a mess of wiring considering the fact your vehicle wasn't equipped for one in the first place. That most likely means it doesn't have the necessary wiring to add the factory equipment. You are just better off going aftermarket.

[@LamontBoucherville]

Nice

[@boblemay5260]

Whats the unit model number pleaee

[@loveallah512]

I need that wood grain dash. Plug me in

[@crimzonr9371]

Hello .... I am currently trying to install i double din android 9.1 radio in my 06 Daytona Charger Top Banana (by the way we own 2) ... Wife's has the premium audio ... not sure if came with amp .. I called dealer and they ran the last the last eight of my vin and and they guy said i only had like a 120 or 140 watt amp .. I gave him the last 8 of my wife's and she's got the premium system ... The previous owner put a aftermarket single din radio in .. took dash apart and he had used the setup to retain steering wheel controls but they didn't work plus music only came out of the front speakers ... Sorry for the long story but don't want to pay some one to install if it isn't that hard .. Any help you can give or suggest ... i noticed a blue wire that was pretty thick ... is that from the amp??? Mine is really really short from where it comes out of dash .... wasn't sure if I could pull on it or not ... I would Greatly Appreciate It .. if you would like to see pics just let me know and we can get in touch some how .. Great Video by the Way

[@Mitchyymitchmobile]

Hey bubba, did you get it squared away?

[@crimzonr9371]

@@Mitchyymitchmobile yea ended taking out to stereo shop .. have to take back so they can finish install .. still don't have steering wheel controls

[@Mitchyymitchmobile]

@@crimzonr9371 gotcha, I’m installing my radio right now, without the controls though, you’d have to install an extra harness for the controls to still work.. hope it works out for you bubba

[@crimzonr9371]

@@Mitchyymitchmobile yea I had stereo shop install but they rushed it and I have to take back to retain steering wheel controls

[@kadenbraasch9854]

@@Mitchyymitchmobile what harness did you use to install

[@DanaAlvarez]

Hi ! Where can I get the radio dash frame from?

[@Mitchyymitchmobile]

Amazon or a neighborhood car audio store

[@auigbelle]

you didn't need to put a interface in?

[@bigmizzymike]

Do you mean a dash kit? If so it was already replaced on the car in the video. You definitely need to replace the factory one.

[@user-sl7re8yu8i]

Nugga yiu made this video so mf difficult

[@mykejones2701]

Its 2 power wires what do I do?

[@jouhanneus]

Myke Jones You need to figure out which one is constant power feed(maintains personal settings, clock/time settings etc) and which one is ignition feed.

[@mykejones2701]

J. Dahl mannnnn!!!! Why did you even reply? You waisted your time 8 months later 😂😂😂😂

[@jouhanneus]

Myke Jones I didn't notice how long ago your post was made at first 😂 Should have just deleted my reply - sorry, man 😜 Did you figure your stereo out?

[@kennyhardwick5971]

Wat size stereo is that? I have a 06 magnum

[@ProvoBeastAudio]

Standard Double din 4" tall radio. Screen size can vary as this one is a 6.2"

[@tarrise01]

I have a 2008 dodge magnum what size indash will fit

[@ProvoBeastAudio]

standard single or double din will fit.

[@kennybo4467]

Provo Beast Audio Installation so I don’t have to order a kit? And will it fit 6.2 double din?

[@fuq1nutube]

At 4:32 what is nine wires attached to

[@IVANHDZ080409]

dc rob 8 for the speaker’s plus one blue that turns on the subwoofer

[@joshuakoplin1117]

Step 1: disconnect battery terminal...

[@garycochran7383]

How u hook the satellite radio into it

[@ProvoBeastAudio]

You will need the SiriusXM SXV300v1 tuner.

[@Wrenchingdaily]

That trim bezel is hideous

[@ProvoBeastAudio]

You can say that again.

[@rjmackenzie]

Holy crap the fit of that is terrible and I'd be pissed if my dash looked trash like this.

[@ProvoBeastAudio]

It was unfortunate the owner didn't want to invest in a new dash bezel. Consequences of extreme heat.

[@bobbybeanz8990]

if you get the smart harness do you need to run the accesory power line??

[@ProvoBeastAudio]

Nope! The smart harness takes care of that for you.