2006 Ford Expedition Interior and Map Light Swap LED

[@vernonpaigejr.1517]

I usually wire LED strips in parallel with the lights. It's awesome

[@robertwise760]

I wanted to do something to jazz up the last couple of years I have left on my 2004 Navigator. So I followed your instructional video & installed rgb led remote controlled lights. Eazy-peazy!!! Thanks sir!!!

[@luisgregoryhinojosa]

I have the same idea with my 05 Explorer Eddie Bauer

[@miguelrodriguez86]

Do you have a video for the puddle lights?

[@rudy6222]

Puddle lights are the same

[@JasonWW2000]

Rotate the mirrors forward to access the screw.

[@محمدفراج-غزةالعزة]

How to remove the council

[@ricardolewis7992]

I have a 2006 ford expedition. What interior led light kits do you recommend that fit correctly?

[@JasonWW2000]

Front two are 194, rear three are 578 (41mm).

[@wynnpham631]

It sounds simple but if I break the lens or the plastic part of the light, it’s not low cost at the dealer to buy replacement, video is money saving, I like the blue color of LED and less heat.

[@dacollecta2000]

Now my middle row lights turn on when I turn the other lights off and vice versa... so I removed my led and now the old bulbs are doing the same

[@dragon1979x]

Thank you, this info was useful for my Navigator. ;)

[@400fps]

+dragon1979x which nav do you have? what year?

[@dragon1979x]

+Marvin St John 2006

[@stevest.martin3940]

We're did you order your lights from? I have a 2000 expedition.

[@peanuthead8287]

Do you know if the led light dim when you close the door??

[@hvaball150]

+peanut head Yes. They fade/dim when they go out after the door closes.

[@peanuthead8287]

+HVABALL I just installed them today did you get to change your side view mirror lights??

[@peanuthead8287]

+HVABALL also I forgot to mention that that the middle lights you really don't need the tape. All you have to do is bend the metal prongs closer and it will fix snug.

[@mosesfavors121]

peanut head

[@rodnich]

@@peanuthead8287 Hey, good call. This works! I never understood the 2-side tape procedure.

[@roj30001]

if you leave them on ford designed that truck to cut the lights off long before you would kill the battery

[@BrienMalone]

Thank you for this. I ended up breaking two of the light sockets anyway but at least your video showed me how to get in there. If I had tried it on my own it would’ve been much worse LOL

[@nickclark7413]

Where did you buy the kit?

[@hvaball150]

Currently unavailable... but is listed on amazon. OPT7 16pc Interior LED Replacement Light Bulbs Package Set kit for 03-14 Ford Expedition | 6000K White | Dome Map Courtesy License Plate and More! www.amazon.com/dp/B00NB8U3JG/ref=cm_sw_r_cp_apa_i_1gYxEbV1687Z8

[@royalty0069]

This was a life saver. Thank you so very much.

[@Sandbridgeman1]

Those first bulbs replaced those lenses are very sensitive the little pins on either side of the lens break very easy what a pain in the ass LOL

[@ranger133XX]

Thank you very much. Great video

[@javierleon7238]

Link to buy please for Lincoln Navigator 2002

[@akwlb2]

Type in nagivatot 2002 led light kit on Amazon or Ebay. You're a big boy now you can do it.

[@donlute3444]

Did ok except there needed to be more light in the work area.

[@rafamorsal]

Thank you very much sir, very helpful.

[@crecencioarguelles3200]

Goooooooooooodd....

[@OriginalMiamian]

Super helpful, thanks.

[@unknogne]

thx

[@rabidgp]

Thanks!

[@theme61]

Thanks a lot 👍