Expedition LED C Bar Taillights

Razor Motors LED C Bar Tail lights for Ford Expedition.
Here's where I purchased these lights
www.ebay.com/itm/275111039518...
Follow up video, watch before you buy:
• Before you Buy Ebay C ...

[@519hockeycards7]

So tempted to put these on a Black 2010 Limited! Those look so clean!

[@Beth-El]

You can't go wrong but I would recommend the anzo version as they have been more reliable than these unfortunately.

[@LRCR]

Thanks for sharing 🤠👍👍 I've got these coming and wanted to see them in action, same brand on eBay but mine are blacked out with the silver 13 I'm hopeful they'll be right... So the pins and grommets are a little offset?? Ill have to see what I can do to make a tight fit... Did the resistor fit okay in that location? or would you try it somewhere else? Very nice and clean looking 🙏 Stay Safe and Play Healthy 🌟 Blessings from the Great Smoky Mountains East Tennessee

[@Beth-El]

Please check this video out before you open them, this is my follow up video after having had the lights for a coupple months. kzbin.info/www/bejne/bn-XkJibos14hposi=jzvVmMLal8yjVLt7

[@LRCR]

​@@Beth-El Man that's strange that the brake turn led block is showing partial power... Got to be in the circuit board inside??? Hope you get restitution and I don't have any problems... 🙏 Stay Safe and Play Healthy My Friend 🌟 Blessings from the Great Smoky Mountains East Tennessee My upload... kzbin.info/www/bejne/bqeQd6KvaJp-qLcsi=WaaoBNOwSudbUoDq

[@Pbaglio21]

Good move getting these!

[@Beth-El]

thanks, let me know if u end up getting a pair. I'm curious to see other peoples experience with them. the ones i got from razor motors were terrible and had to be sent back. i posted a video on it. i wonder if other sellers have better quality but razor motors customer service was excellent.

[@chandlerbrickenden7322]

These look great and like you said, like they're OEM. Most aftermarket stuff looks too boy racer/Euro. Very tempted to see if they'll fit on my 2nd gen.

[@Beth-El]

if u get them dont get them from the site that i brought them from i had to get them to send me a replacement that also failed so the next set i get i will be getting from anzo themselves or somewhere that offers a 1 year warranty

[@Beth-El]

I made a video on my page showing that the 3rd gen lights will fit on the 2nd gen, only difference is the reverse light. you will have to order or get one from the junk yard but u will need the reverse light bulb for the 3rd gen. I'm going to take my gen 3 tail lights and put them on the 04. kzbin.info/www/bejne/imGWiWaiqr2pl8Usi=Pllyw8TK14hweVA6

[@thesniper07-10]

Thanks that's help 👍

[@Beth-El]

no prob, if u get a pair post a video and let me know ure experience with them.

[@thesniper07-10]

@@Beth-El I will, thanks👍

[@MxTXCano]

Great video, did you get the chrome or smoked version? Thanks

[@Beth-El]

These were the Red version. the smoked version are really just Black insides with a clear lense on back

[@bobbytakhar4217]

Great video and appreciate you including the kids! Have you had any issues of water getting inside the assembly when washing your car or going through a car wash? Thank you

[@Beth-El]

I didnt have them long enough to find out, they were sent back as they failed multiple times. I put up a video on that: kzbin.info/www/bejne/bn-XkJibos14hposi=AMcSypXoCDDbi2rn I'm now unfortunately but fortunately running the actual Anzo lights which these were pretty much an exact replica of, video on that as well: kzbin.info/www/bejne/kGjZdJlnqLJ_qMUsi=oGMmoCfdNUwxQZh3

[@Beth-El]

Update: on my new anzo headlights that is I have had no issues with moisture getting into the lights.

[@unknogne]

future reference: next time you want to test a brake light/turn signal, you could just use the hazard lights it, doesnt make much difference. great video btw thanks 👍🏾💯

[@Beth-El]

Thanks, I started doing just that.

[@matthewm3912]

Do these come with bulbs in them, or do you have to provide those? Very cool, i've got a 2013 limited EL in Ruby Red Metallic. I think the smoked version would look good. Got a link for any quality projector headlight housings?

[@Beth-El]

They don't come with any reverse light bulbs, I picked up the Sylvania reverse light bulbs from auto zone and they have been very reliable thus far. As far as which projector headlights to get, I've been eying the ones on ebay but haven't pulled the trigger on them yet. Heard decent reviews about them. www.ebay.com/itm/203484039716?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Oy-oQhUTQ1q&sssrc=2349624&ssuid=FJErJoEnTn6&var=&widget_ver=artemis&media=COPY

[@ss-uo9sh]

❤🎉

[@JT-fu7cf]

Did you have any issues mounting the resistors to the lamps? The company stated they should be mounted inside the taillight pockets on the vehicle since they get hot. Thanks for the video also!

[@Beth-El]

I did not have issues with resistors per say but I did have issues with the lights themselves. Most welcome for the video, nice to give folks a visual of the products we may aspire to get especially when no one else has a video of said product in question.

[@nathanperez2100]

what year is your expedition ? i have a 2003 but i don’t know if those will fit it.

[@Beth-El]

This would be for 07's and up

[@wowman6317]

Any updates on these long-term? I bought similar looking headlights with the neon tube and they are pieces of trash half the tubes already burned out the clear coats peeling off total junk I'm very leery about these long-term

[@Beth-El]

I posted longer term video here: kzbin.info/www/bejne/bn-XkJibos14hposi=_D45_iezHCZyl3sb

[@razorskynet]

hello! Are these lights compatible on expedition 2 2004 ? thanks

[@Beth-El]

they fit on my 04 the only thing is you would need to take the reverse light plug off of a 07 and up. I did a video showing that my factory 14 lights fit on my 04

[@Xoxo-zg2do]

عطني رابط شرائها

[@Beth-El]

للأسف أنا لا أتحدث العربية، لذلك لا أعرف ماذا كتبت. يوتيوب لم يترجم ردك

[@wowman6317]

No one ever does a follow-up about long-term cuz the headlights I got with the glowing bar turned out to be pieces of absolute garbage within a year with a clear coat peeled light bar diodes burned out

[@Beth-El]

You are correct, I did follow up videos on the chanel. I'm now running the anzo tail lights which have been perfect thus far.

[@Beth-El]

Follow up video: kzbin.info/www/bejne/bn-XkJibos14hposi=jzvVmMLal8yjVLt7

[@eriksanchez9652]

Trochó para trabajar

[@Beth-El]

Don't understand?