2006 honda civic Armrest, handrest console replacement.

2006 armrest assembly console part 83450-SNA-A11ZA, also floormat 08P15-SNA-120B replacement.
Music: www.bensound.co...

[@CASPER.410]

When you use flat head driver/panel clip remover, wrap electrical tape around the head so that it does not damage your interior parts.

[@automotivetv9861]

no

[@haileejohnson3535]

I just purchased one from a local junk yard for $40. It was in excellent condition and worked perfectly.

[@wordup2yourmother]

They wanted $75 at my nearby junkyard. I talked him down to $45, $49 after tax.

[@Rxgio1]

Found 1 for 8$

[@Rxgio1]

@@jj5153 local junkyard they are underrated

[@marymcfadden6631]

Yes, the hardest step will be putting the pin back through the springs. An hour and a half later, several finger cuts, and a slightly bent rod with zero success. Then I read the comments about taking off the cosmetic cover. Two hex screws and presto, everything is clearly visible. Now I can see exactly where the darn pin is going. Mission completed after a lot of wasted time. Oh well, hopefully others will include this step.

[@CmdrPwnage]

Thanks for the video. Mine wasn't broken, but the metal pin had somehow fallen out on one side. What a pain in the ass that was to put it back in. Every time I would put the armrest up in the correct position, the spring would wobble away from the hole. I tried putting a pin on the other side, but that didn't work. So I spent like 2 hours trying to get it through the spring. I finally realized that it'd be easier to take the black piece off, then I could hold the spring from the other side.

[@tabp8448]

Yes. I absolutely hate the man who made this video. I wasted 3 hours of my life trying to put the pin back in. I realized that i could take the black part off and got it done in 4 minutes.

[@mok.9845]

@@tabp8448 how do you remove the black piece?

[@mok.9845]

How you remove it please?

[@toshlandis826]

@@mok.9845 you have to remove the two screws with a special hex wrench

[@yeasboy]

I was really stuck while putting axis pin back. Thanks to you method and my kid lollipop stick to align it well

[@hxhdfjifzirstc894]

I think it's pretty easy to replace the fabric on top of the arm rest, if you just disassemble it a little more. This will save you a lot of money, compared to buying a new part from a dealer.

[@jwanders10]

Lolol I stayed up super late trying to get this done in this car that I’m selling to a customer this morning. It was annoying, but I finally got the technique down. That pushing the pin through the holes and spring part is the worst. It took me about two to two and half hours of trial and error. Now I’m sure I can do it in less than 30 min.

[@christopherfuchs2687]

Just a thought. But maybe you could use a wire coat hanger cut down to a long length, that way you could put it completely through and use it for your actual pin to follow. Like pull the coat hanger piece as your pushing the pin through that way it acts as a guide rod of some sorts?

[@iTzMiTo]

Thank you so much, the only video I found teaching how to remove the actual engine the other one just showed how to remove the cover, mine is rlly broken I needed to remove everything so thank you

[@opiesworld]

Can you tell me where you purchased the armrest replacement part?

[@tonyhurtado7908]

This video help me so much!!!! Big tank you!!

[@brasilguy4046]

i just installed my new console, i felt like i was apart of the fast and furious crew when i was able to do it

[@shoebnetworking7128]

@Lazaro Sanchez how much did the armrest cost you?

[@PundlaBear]

This looks exactly like my armrest but I have a 2010 honda civic. I am afraid to get it though because what if it is the wrong fit

[@FrenchValleyAirport]

Papa 2006-2011 cars are the same.

[@hxhdfjifzirstc894]

What, you can't return something if it doesn't fit? What a scam.

[@edwarmachuca3853]

I have a 2009 honda civic 4 Door But i didnt came with the arm rest I bought a new one but i saw the console came without the room for the pin to secure the arm rest What would you recommend it?😊

[@Lssanchez]

You most likely need the bottom portion, the civic model was EX. You may have another version.

[@cesarmartinezhn]

Que tal Lázaro, muy bien explicado el video excelente, tiene la url donde comprar la pieza la pieza armrest y las alfombras nuevas?

[@frankie11409]

Thank you for sharing this you are the man.

[@wesoly757]

Hi great video, where did you get the carpets?

[@carlosquiroz7819]

I have a VP model (Value Package) which did not have the arm rest cover. Anyone know how I could replace the black console that has the hinged and arm rest?

[@TheWebah]

Yes! Thank you so much. I'm a big dumb dumb so this was helpful haha.

[@kevinmcneil3693]

ILL BUY YOUR OLD ONE. I just need the insides from it as my front latch tab broke off mine.

[@Lssanchez]

Sorry, got rid of it.

[@ObeyGoofy]

I have one

[@btx5740]

Just did my ‘11 civic That pin comes out the other way You don’t need that spring

[@andres1191]

is it possibe to add this to a honda civic 2010 dx model?

[@fernandomendez5128]

where did you buy that spare part i need it

[@arwillarroyo7454]

is the fd and si armrest the same?

[@MySuperdeb]

Thanks for sharing

[@MrJeromegon]

I have 2009 Civic. Question is where did you find that piece.

[@Lssanchez]

www.hondapartsnow.com/genuine/honda~armrest~assy~83450-sna-a11za.html

[@wes326]

I spent about $30 to replace the cover and latch with aftermarket items. Compared to $275 for a complete cover assembly like this.

[@latonphillips5353]

Thank you!

[@425403]

Lazaro, Do you still have the old console part, I would like to buy that from you..

[@sihernandez7348]

Lazaro! Where did u purchase the new console ? Having trouble finding ones like this online

[@Lssanchez]

www.hondapartsnow.com/genuine/honda~armrest~assy~83450-sna-a11za.html

[@_jagar]

This is very informative, but how do I market PPE during a pandemic?

[@hxhdfjifzirstc894]

Step 1: Cold and Flu season Step 2: Tell everybody that they're going to die, on every news channel Step 3: Profit

[@cruzandy18]

Thaaaaanks man!

[@jai19779]

Hi. Question. When did u do this install and how much did the armrest cost you?

[@Lssanchez]

February 2017. Total cost Armrest and Floormat - shipped to CA. $256.02 83450-SNA-A11ZA Armrest Assy., Console *NH598L* [Civic | 2006 | 4 Door EX (NAVIGATION) | KA 5AT] 151.81 1 151.81 08P15-SNA-120B Floor Mat, Gray [Civic | 2006 | 4 Door EX (NAVIGATION) | KA 5AT] 70.55 1 70.55 Subtotal $222.36 Tax $16.68 Shipping & Handling $16.98 Total $256.02

[@Lssanchez]

+jai19779 installed in on January 2017, 151.81 for armrest.

[@julioalvarez9650]

Lazaro Sanchez They want an arm and a leg for that thing. Eh?

[@wordup2yourmother]

I bough and installed one from a junkyard today for $49. Thanks for the video. (I talked him down from $75)

[@danielsalmeron5271]

Im having trouble finding the leather version, anyone have recommendation?!

[@Lssanchez]

If you can find a cloth one, I would recommend getting it reupholstered. I recently had an order cancelled because parts are no longer made.

[@danielsalmeron5271]

Lazaro Sanchez yikes, ill look into that. Thanks for the help!

[@hxhdfjifzirstc894]

Drop the arm rest off at an upholstery shop... they'll be thrilled to have such easy work.

[@iphail123]

where can i get a new middle.console

[@CmdrPwnage]

Had my car detailed and the fuckin pin popped out again. How do we make it stay in place???

[@hxhdfjifzirstc894]

Wrap electrical tape around it. Just one layer. Two layers if one isn't enough.

[@HECTOR-El-Loko]

Where did u order it from

[@Lssanchez]

www.hondapartsnow.com/genuine/honda~armrest~assy~83450-sna-a11za.html

[@carlostorres-us3pm]

What a stupid design Honda! As with most cars, all it takes is two screws and off comes the armrest. This Honda design just lends itself to breakage during disassembly and incorrect re-installment.

[@ebonifullilove]

Where did you buy armrest assembly????