2006 international 4300 DT466

[@TheDesmondscott15]

Probably the engine ecu connector for fuse in battery box. Had the same issue. While the engine is running go in battery box and wiggle harness with all the fuses attached and see if it dies.

[@53_ford_custom15]

Sounds like a camshaft position sensor

[@paolopallavicini715]

Im having that same problem , and was the camshaft sensor .

[@crevette11]

@it's what it is! can you please provide the diagnostic for your problem? It would greatly help us all here

[@godprotectsme2712]

I have this truck and it always clug the diesel mesh besides the diesel filter. You have to remove the diesel filter first to reach the diesel mesh filter, use carburator spray to clean the mesh put it back in, install the diesel filter (full with diesel in it) and thats it.

[@toddmolloy311]

I wonder if the oil and fuel filters he put in where primed (filled them up) before he put them on?

[@albericgarcia1329]

Hello friend ), I would like to know if you found the problem, it is happening to me right now, your response would help me a lot

[@johndowe7003]

sounds like your truck is using up the fuel in the fuel bowl then dying. you probably got a restriction somewhere. most likely a clogged filter somewhere. you can pressurize your fuel tank and check if you got more leaks.

[@itswhatitis8364]

Thanks man, I've been putting it off cuz it's not at the top of my to-do list. but I'm going to have a technician come and check it out, I'll let you know the results. I'm sure it's a simple fix, the truck was fully operable before it parked it, it's not like it broke down on the road.

[@itswhatitis8364]

So I had a mechanic come and pull codes, I don't know the exact codes but basically the computer was telling him that all the injectors are faulty... Which seems unusual he thought it might be a harness problem, but I agree with you I think it's something in the fuel line still.

[@johndowe7003]

@@itswhatitis8364 just put a hose to your fuel bowl and use a gascan for a remote fuel tank and see what it does. There's a filter screen in the fuel tank that can break or clog up and it will cause your truck to starve for fuel

[@itswhatitis8364]

@@johndowe7003 I will try that tomorrow, I'll let you know how it goes thanks for the advice.

[@raymondpaster861]

@@itswhatitis8364 Im having the same problem, I was told to change the fuel pumps.

[@jotegg1276]

Dont bother if your looking for the answer, this is the last video from this channel. G to Joes Bus Barn for excellent videos on a 466

[@ahmedabdi9297]

Got the same issues I hope the primer solve the problem this is crab I can't belive you put 500k pluse on it its time to go bro

[@andreferdez2187]

Hi. What was the problem?

[@hectorh.1341]

So what was the problem?? I’m having that problem!

[@zrofcks4939]

Did you figure it out? I'm having the issue too lol

[@Alchemyisinvolved]

​@zrofcks4939 me too did you guys figure it out?

[@JeanEzayi]

Bonsoir comment je peux trouver la pin de cette machine et combien cout'il

[@ahmedabdi9297]

I belive the high pressure oil rail o rings busted In one or more injector when it's hot it dumps oile that's why it won't start when it cools the oil drain from the top rail to the bottom it will start charging oile rail O rings that will solve the issue

[@OscarHernandez-rj1dl]

What was the problem

[@JeanEzayi]

Le pompe manuel de gaz

[@johnnytooby9980]

Of course it's not going to do it when you want it to.

[@mvg-1776]

Cam position sensor.

[@Blessingbj]

So did you find out what the problem is I'm having the same problem

[@ElidoTorres]

Got the same problem , what can it be ?

[@zrofcks4939]

Was it showing check electrical at any point before you found the problem?

[@ElidoTorres]

Yes , what can the problem be ?

[@BEETSEEKA]

Stuck open governor

[@18351971a]

change feul filter

[@JeanEzayi]

Le pompe manuel de gaz