2007 2008 2009 Toyota Camry Headlight High & Low Beam - How to Install LED Bulbs

[@lasfitvehiclelife]

Limited sponsorship for Newest LED Bulbs Testing Provided. Don't hesitate to contact us to grab this opportunity. 1. Contact email: [e-mail] 2. Please tell us your vehicle make, model and year

[@cchongk]

FYI laying the connected bulb with ground that close to the exposed positive battery terminal was a bit sketchy. May not have gotten hurt, but accidentally tapping the bulb ground to the positive could've fried the bulb electronics. Abundance of caution!

[@neilreid2298]

Compared to the LED conversion on my '16 Ford Fusion this is a super easy walk in the park. Thank you for the vid!

[@traviscarter5656]

What is the brightest bulb for a 2007 Toyota Camry LE

[@assisalexandre2219]

is it the same way to CAmry 2007 XLE V6 ?

[@kappasoap4770]

My camry low beams are a different connection ? My high beams are the twist offs but the low beams are completely different

[@MazinArgawy]

thankx lot for your efforts

[@lasfitvehiclelife]

We are glad to hear that this video can help you! Could you please tell us whether you have tried Lasfit LED bulbs on your Toyota Camry?

[@switch55]

How do the high beams do both high and daytime? Wouldn't they flicker on daytime?

[@lasfitvehiclelife]

Thank you for the message. Could you please tell us the trim and the year of your Camry? If your high beams share one bulb with the DRLs, it probably has flicker problems after you installed LED bulbs. You can solve this problem by canbus decoder. If you have any questions, please contact us.

[@b_chill]

So how long does the LED bulbs last?

[@lasfitvehiclelife]

Thank you for the message. Many customers have installed the LAplus LED bulbs on their Camry, and they give high praise for our product. Some customers even have used them for more than 5 years and told us that they are still working well. We've been updating LED bulbs for generations, we just released the latest LED light, LAair series, which is doing better in quality and durability. Are you interested in testing them? If you are interested in that, please contact us by email. Besides, could you please kindly tell us your vehicle's Make/Model/Year? Contact email: [e-mail]

[@wg7644]

Understand that the low beam light bulbs are the lights on outside next to the signal/running lights and the low beams are part number h11. the high beam light bulbs are the two closest to the grill and their part number is 9005. SO UNDERSTAND THE LOW BEAM LIGHT BULBS ARE PART NUMBER h11 AND THE HIGH BEAM LIGHT BULBS ARE 9005.

[@lasfitvehiclelife]

Thank you for your comment! Based on the information we have and the feedback from 2007-2009 Toyota Camry users who installed H11 low beam bulbs without any bulb size issues for this year. Could you please confirm the year, make, and model of your vehicle? Also, could you let us know if it's the OEM headlight?

[@wg7644]

@@lasfitvehiclelife The sylvania brand is what i used. You can't put a 9005 bulb in an h11 socket - I don't know if you can reverse the two.

[@Townie9225]

Hello, I noticed this video was released in 2017. I’m looking to do the same thing my Toyota Camry, would you mind informing me how long did they last? Also did you have any problems with them?

[@christinaduncan8285]

Thanks but what you were demonstrating was out of camera view most of the time, which was frustrating! Not sure I learned much. :o(

[@lasfitvehiclelife]

🤣🤣😆😆😅This video was shot long ago, very rough. 😂 What's the year of your Camry? Do you want to change low beam and high beam?

[@Brian-Outdoors]

The bulb placement looks just like my parents 2005 Toyota Solara convertible but I went with the 10000 lumen a bulb 20000 lumen a pair Cougar Motor bulbs. Been running them in my wife’s 2015 RAV 4 for about 1.5 year no issue so far.

[@lasfitvehiclelife]

Thanks for your information. Lasfit LED bulbs have been upgrading constantly, if you would like to try Lasfit LEDs, feel free to contact us!

[@Persianborn]

I did replace my H 11 low beams and work good, but for my camry 2008 hybrid, I tried few 9005s for hig/and driving light but the driving light flickers, I put canbus decoder and still didn't resolve the issue. I am wondering if there is a specific brand of 9005 led lights needed for Camry hybrid 2008?

[@lasfitvehiclelife]

What canbus decorder did you put to solve the issue? Actually, it is normal that DRL flickers, because the volt is lower than normal light(high beam). We'll redesign new LED bulbs for high beam and DRL, you could follow us for the latest news and more LEDs installation.

[@julyzerg1]

@@lasfitvehiclelife hey so did the new LED bulbs for high beam and DRL ever come out, I'm looking for 9005 high beam/DRL for 07-11 Camry

[@lasfitvehiclelife]

@@julyzerg1 😂 The LED bulbs have been upgraded sveral times, the decoder could fix the DRL flickering issue, but the DRL brightness will be the same as high beams. Would you mind this?

[@julyzerg1]

@@lasfitvehiclelife Well on 07-11 Camry, that's how it work so I dont have any choices. You got a link?

[@nicnothingnice]

Thanks for this video! I can't wait to order mine I wonder if fog lights are difficult?

[@lasfitvehiclelife]

The fog lights are not difficult to replace. Actually, the installation process is the same. Firstly, you need to reach the stock fog lights, then twist out the halogen bulb and replace with the LED bulb. What's the year of your Toyota Camry?

[@nicnothingnice]

@@lasfitvehiclelife 2009

[@highrolla2929]

So the same bulbs will work in both the drl/highbeams and the normal low beam headlights?

[@lasfitvehiclelife]

Low beam and high beam are different bulb size. Low beam is H11, high beam is 9005.

[@dcaddell1505]

Do the lights flicker for the DRL lights

[@johnny787]

Glad I’m not the only one who clips the connector in backwards first, every time..

[@lasfitvehiclelife]

Yeah... for different models, the negative and positive pole are different. If it does not work, which need to turn around the connector and connect it again.

[@kirkhsin123]

Remove the battery first before replacing the light bulbs should be easier

[@TheAizer]

Hello l wonder which headlight accept my car. Normal light or Xenon? I do not have book. My car Camry 2007 LE Plese help me Thanks

[@lasfitvehiclelife]

Hi, your current headlights are OEM type, right? If so, these LED bulbs will fit for your 2007 Camry LE www.lasfit.com/products/2007-2009-toyota-camry-led-headlight-bulbs-exterior-interior-lights?Social&YTB%20Channel&Toyota%20Camry%E6%95%B4%E8%BD%A6

[@FNO_WHOPPER]

Will this work for 2010

[@lasfitvehiclelife]

Thank you for the message. You can check all compatible LED bulbs for your 2010 Toyota Camry on this page: www.lasfit.com/products/2010-2011-toyota-camry-led-headlight-bulbs-exterior-interior-lights?Social&YTB%20Channel&Toyota%20Camry%2010-11%20Whole%20Pack we just released the new prodcut and we have limited special discount to test these new arrivals, are you interested in testing on your vehicle? You can find H11 for your regular lights from this page:www.lasfit.com/products/9005-led-headlight-bulbs-laair-series?YTB+Channel&LAair+H11 You can find 9005 for your bright lights from this page:www.lasfit.com/products/9005-led-headlight-bulbs-laair-series?YTB+Channel&LAair+9005 If you have any other questions please contact us.

[@stavio12]

Hi mate, I have a 2007 Toyota Altise. The driver side low beam is gone. It's got a rubber boot as a cover which I got off but the bulb is hard to get off. Can't see any clips or any hint of twisting to get the bulb off, I am stumped.

[@lasfitvehiclelife]

Hi, did you try to twist it anticlockwise and also rotate it clockwise? For 2007 Camry Altise, the low beam is H11. It's not hard to twist out the halogen bulb.

[@stavio12]

@@lasfitvehiclelife Yeah mate, I've got the assembly out by twisting it anticlockwise. It's the actual bulb itself that I cannot undo. Does the bulb twist anticlockwise as well because there are no clips. Thanks for the reply.

[@blesenkuruvilla2130]

Do we need a ballast or a decoder or anything extra with this? I have a toyota camry 2007 LE.

[@lasfitvehiclelife]

No need a ballast or a decoder, it is plug and play, to replace original halogen bulb directly

[@kristinaxbeauty8786]

Do I need to get LED? Or can I just get 9005 without it? What’s the difference?? Help lol

[@lasfitvehiclelife]

Hello, do you want to replace low beam and high beam? What's the year of your Toyota Camry?

[@razaa2849]

If we want to change only high Beam into LED, So can we change it. Or we have to Change high and low beam both in LED?

[@lasfitvehiclelife]

You can change only high beam into LED, the bulb size is 9005. New LED bulb 9005: bit.ly/2TWqRO8

[@A_guan]

I bought there 3 months ago and as of now they have turned loose and have fallen out of the headlight housing. I'm assuming the leds got so hot it melted some of the plastic. When I go to reinstall they are very loose.

[@lasfitvehiclelife]

Hi, plz contact LASFIT customer service for support: [e-mail]

[@t.g.5797]

Thks getting ready buying me a set for 2011 camry se. Wasnt sure which one was which good video. Same brand lasfit. See how long they last ✌

[@lasfitvehiclelife]

Hi, do LED bulbs work well on your 2011 camry?

[@monchy25]

I think 2011 is a projector headlight and the bulb is high and low beam combo, I am trying to get some HID lightbulbs, been trying to get the right ones let me know which are they?

[@A_guan]

I just bought the same bulbs for the same car. However when installing I could do it like how you did it placing it in 9-3 position. Also once I found the correct fit, it thought I'd have the turn the lights clockwise like with the amount of travel the halogens were, but it was just a little twist and they were locked in. Is that normal?

[@Mutale621]

Hello, sir, am trying to buy some high beam 9005, would they work on my Toyota Mark X 2007 model or it works on most car models. Please advice. Thank you

[@lasfitvehiclelife]

as long as it does not run the DRL on the same high beam bulb or where ever the 9005 bulb is installed it will work. At this moment our bulbs are not fully compatible with vehicles who have the DRL on the high beam or low beam bulb.

[@Mutale621]

@@lasfitvehiclelife Thank you so much!

[@jordanclark7934]

hello i got a toyota Camry and have H11. they are hard to install how do you do it?

[@jordanclark7934]

LASFIT Auto Lighting 2007

[@jordanclark7934]

LASFIT Auto Lighting installing

[@jordanclark7934]

LASFIT Auto Lighting nvm thank you i got them to fit in and working. They look great thank you again

[@tiffanygrns]

Camera is all over the place.NOt steady😮

[@lasfitvehiclelife]

Thanks for your feedback! We'll take this into consideration for future videos to ensure a smoother viewing experience.

[@highrolla2929]

Bought some, do not aork

[@lasfitvehiclelife]

Please contact customer service for support. email: [e-mail]

[@michellesauls9280]

can't see what you are doing your camera is aimed to damn high

[@lasfitvehiclelife]

Thanks for your feedback! We'll take this into consideration for future videos to ensure a better viewing experience.

[@laskipikera3205]

We don’t even see what you are really doing

[@lasfitvehiclelife]

😂🤣 This video was shot long long ago, we have been creating more valued videos. What can we do for you?

[@nadhemaahmed8025]

u 👎👎👎👎👎👎👎👎 why u don't turn the DRL on 🤔

[@haileynichelle8343]

Should be wearing gloves...

[@lasfitvehiclelife]

Thank you for your comment! We will keep this in mind for the future.

[@nadhemaahmed8025]

😂🤣😅😅🤣🤣😂👎👎👎👎👎👎👎👎👎