2007-2013 Toyota Tundra Cruise Control Switch Replacment

Cruise control was not working, now it works. Bought part on EBay.

[@standtall7646]

You got what you paid for. It's not working correctly. It should turn off at ANY time. It should turn on at most any speed but, won't activate until about 20 mph, I believe. The 'Cruise' light should go off when you turn it off. This video was a great help to those needing to know how to replace CC Switch!

[@jonjenz]

I cannot tell you what a blessing this video is. I have a 2010 Tacoma. Bought it used. Same exact issue. Followed every step in your video and it took me under 30 minutes. Boom. Thank you !!!

[@reedschneider9376]

Great Success! I watched your video, ordered my Ebay switch, and in about 10 minutes my cruise control switch was replaced. Best of all, it Works!!! I want to thank you for posting this video as it has not only helped me, but looks to have helped others. Thank you good sir!

[@johnnierfrescas457]

Thanks for being “that” guy. Had the same problem with my 2009 model also. 2 filipe’s that’s hilarious- never heard that before!! Thanks again!!

[@FirstnameLastname-tg7ne]

CONGRATS! Excellent video and step by step instructions that led me to fix my 2008 Tundra cruise control switch replacement successfully. 👍

[@brentdavis4349]

Just replaced mine on my 2008 Tundra with this video.. for some reason a t40 worked better for me. Haven't tested it out yet, but thanks for the video! Bought my replacement on Amazon for 16.

[@Clodknocker]

Thanks for the video ...I didn't replace my switch ...but used you video to see how to get my switch out and then took apart my original switch and there's a copper piece in the switch that contacts some metal slides that got moved some how anyways reinstall the copper peice and shes good to go👍

[@kimly1546]

My cruise control was working on my way to Home Depot. On the way back, it's not working. I'm going to do the same with my 08 Tundra.

[@oxman1588]

This was the ticket! This video saved me so much time and frustration. Thanks for doing it, and thanks for posting!

[@DA_Fishman]

Thanks for the video, I installed A $20 eBay part, and it’s been working for six weeks.

[@JL-dz1me]

Hey thanks for the video. I just snapped the stalk of my cruise control arm after a 1600 mi trip on a new trick. Glad to see it’s a simple swap before I order the part!

[@redealexander8951]

Thanks for posting this video, about to install mine. The cruise control stalk on my tundra seems to be sticking like something was spilled in it or something but idk

[@faythemoon]

Thank you, good video simple and to the point.

[@brucehildebrand4785]

Awesome video, have same model and year Tundra and cruise control switch was very easy to replace

[@joneveritt4950]

You're a lifesaver, thanks Doc!

[@redleg84]

I'm having the same issue, part came in today. Great video, this helped alot. Hope this fixes the issue

[@lewisrice6080]

Thanks for doing this!

[@mrkopmana]

Thanks for sharing. These are the best videos.

[@jirehjohnson9049]

Thanks for the video really appreciate it helps alot I had the same problem with the same year 09 tundra

[@KameronKinser]

Thanks for the sharing the video. I just replaced the cruise control switch on my 07 Tundra with this video.

[@connerburnett2807]

I have 07 Tundra as well. You think the switch is the first place to start to fix cruise control? or should check the fuse maybe?

[@vichaixiong5381]

Thanks for the video. I have to change mine out too.

[@4000marcdman]

Great video brotha. Thanks a lot.

[@seaperu1]

always tighten your battery terminals for any kind of operation ... power loss can result in computer damage

[@rickywright3894]

Good video! Thank you. BTW, if I unhook my battery for anything, after reconnecting, the truck runs rough for a few minutes, but then smooths out. Must be in the program

[@jamesw.hilliardjr.6128]

Thanks, this saved me money!

[@curt72bugatti]

Thanks for sharing 👍

[@omaraguilar-cr8zh]

Thanks a lot bro!

[@toddhoffmaster6057]

My 2008 has the same issue. I just bought mine 2 weeks ago and I have the exact same problem. Do you also have dim lighting inside the stereo and info monitor? I can't see them during the day at all - yes, I turned the adjuster to full bright.

[@ronaho8940]

Thanks great vidio I’m out to install.

[@donnelldavis8910]

Thank you

[@omaraguilar-cr8zh]

You two felipes here 😂

[@dns16372]

Thanks

[@barefootbob1269]

Most of the time the switch is not the problem. It is in the steering wheel assembly called the clock spring. also that wire can be bad. The next time it acts up turn the wheel back and forth a couple times and try it again.

[@bgharper9666]

Is it still working? I bought a new one and I am going to install it tomorrow. Same issues.

[@HAL-dm1eh]

Nice video. When it comes to car parts online there is a happy medium between brand new OEM and cheap Chinese crap. Get a nice junk part off Ebay. You get the price of cheap Chinese but it's OEM and (for me so far) the part is in much better condition than the one it was replacing. As for this latest part I don't think they ever used the cruise control because it's got more "click" than my old part. Basically bran new OEM for the price of a crap part.

[@scottgarvy]

My light comes on but cruise not working.

[@bojangs1]

Take it out of park. And you should be able to select on or off.

[@troyhubbard50]

Love your commentary. Thank you for posting! Update 1-13-21 Bought a new OEM cruise switch, install went super easy but still not working. Does anyone have any recommendations? I have a 2008 Tundra. Thank you

[@ScorpionMiguel20]

Brake light switch fixed my cruise control issue but its was on my 07 silverado but now im looking to fix cruise control issue on my 07 tundra :]

[@troyhubbard50]

@@ScorpionMiguel20 For sure, my brake lights are working. What’s also strange is now my back-up camera isn’t working. Super frustrating.

[@streeterdockter7490]

clock spring

[@troyhubbard50]

@@streeterdockter7490 Where’s that located?

[@streeterdockter7490]

behind steering wheel, have to pull the wheel to do it but total job takes 15-20 minutes just buy a $20 wheel puller on ebay before you do it. also mark where wheel is with a sharpie before you pull it off lol, i didnt and had to repull it 3 times to get it on straight