2007 - 2014 Toyota FJ Cruiser Radio Install

[@ProvoBeastAudio]

Parts linked in the description of the video!

[@Idtelos]

great vids. Looking to upgrade my stock stereo unit on my fj cruiser and these vids have been of great help.

[@dsanders5984]

Wow, if I could find someone that was this knowledgeable I’d buy a new radio for my fj...

[@shodin99]

Not sure if you have replaced yet or your area.. I have a friend in Oregon that owns a Audio shop and would help you out! Replaced mine a few months ago! Let me know..

[@lunchie80]

Just use a complete installation kit from brands like Aerpro. No soldering needed. All plugs. Even a moron could work them out

[@LosDosOkies]

@@lunchie80 do you have a link for aerpro kits ?

[@Ty-tie_FTW]

I have the kenwood dmx-4707s. The E-brake wire comes off the unit seperate from the actual wire harness. I'm gonna try to ground it and hopefully that works

[@cathesosebee1405]

I have just purchased this accessory after watching your videos. I’m confused on the Dip Switch settings. Any chance you can help me? (2011 FJ Cruiser)

[@Louis_Cipher]

Where do you wire in to do the AUX? You don’t show it in the video.

[@chrismcguire6059]

I am going to purchase all of these parts and give it a shot. Only area that I did not quite get was the rca part. I also would do a bluetooth mic.... I want to go hands free to my fj...

[@resident8935]

have you been able to do it? and if how is it

[@loaubin8756]

I just bought a harness but it just has 2 plugs socket instead of 3 like yours, what does it mean?

[@kennyetenne8894]

Does the factory subwoofer work with this install?

[@stevechiburis9391]

Is the factory subwoofer still connected and able to use with the on/off switch on the lower panel?

[@ProvoBeastAudio]

Yes!

[@faresnar09]

Informative video with very nice job done ... Thanks

[@shaneg2281]

Can the angle of the aftermarket double din be adjusted? Drives me nuts

[@zodeefinance5151]

Me Too!!

[@kazzTrismus]

Yes..but only a little.. You can put spacers behind the top screws and or modify the bottom of the bracket...but at a certain point the radio will touch things you shouldn't/can't modify... When done it may fit a bit weird in the hole...most cars the effort isn't worth it

[@nickparker3003]

Thanks for the video. I’m installing a pioneer head unit with same adapter harness. Is it fine to connect the orange/white dimmer wire on the pioneer harness to the solid orange illumination wire on the crux harness? Thank you!

[@damienfrizzell9394]

is that a standard double din?

[@fredotre1112]

My JVC touchscreen stop working. The screen turns on and off , won't play anything. Now I know how to take off the brackets without breaking anything and find the short

[@anthonyf1615]

do have to buy the new brackets to in stall or does the factory ones work

[@rx7vader872]

Does this work even if the radio holds 6 discs?

[@josesegura9862]

Great video! Thank you. I was wondering the same thing about the factory sub woofer. Is it connected and can it still be turned on and off?

[@ProvoBeastAudio]

Yep!

[@treycranson]

@@ProvoBeastAudiodoes it just get its signal via the high levels you sent back from the amp?

[@factoryminis3437]

Unfortunately, Crux doesn't make a loom for a 2012 -2014 radio without JBL.

[@lashirtprinting5506]

Great Job, Thanks

[@tonyboetto3764]

pretty cool, any recommendations for a bluetooth mic installation?

[@kentboorman9328]

Any chance you have an email address I could get some questions answered at? I’m just trying to install a Sony double din I have a steering controll harness but no dip switch box. Also parking break wire possibles on my unit? Anyway I would be happy to hear from you.

[@lyric.kayden]

Nothing special to get the factory sub to still work? Is the wiring just apart of the regular wiring? Thanks

[@ProvoBeastAudio]

factory sub pulls signal from the rear channels of the radio, so as long as you keep those rear channels connected, factory sub will continue to function the same.

[@lyric.kayden]

@@ProvoBeastAudio very nice and sweet. Thank you very much

[@josephstewart2757]

What size was the radio?

[@clayweatherford7462]

Can’t find the list of items to order? Said it would be in comments.

[@ProvoBeastAudio]

List of parts in description, not comments.

[@mohammedalzamanan4957]

Hi, thank you for this video. Where can pay like this part you instead? Thank you again

[@ProvoBeastAudio]

Sure thing, all parts are linked in the description of the video!

[@samgutierrez4105]

Are you in Provo Utah area dude?

[@edwardscottiidds4941]

I didn’t turn it on

[@josephkrouse7247]

2