2007 Nissan Versa, How to replace front brake pads

We are back at it again, this time,doing brake work, we are switching brake pads and rotors, on a 2007 Nissan Versa.
We try to tell you step by step on how and what you need to do this task yourself, and avoid paying those high fees mechanics charge.
Please, Hit that Like button, comment and don't forget to
SUBSCRIBE, for more content

[@idsoftware7]

Avoid using the C Clamp. that could damage the piston. use gloves my friend. unless you want to get dirty... and use brake cleaner for new rotors. I think you have a general idea on what needs to be done but theres always room for improvement. Also use torque wrench instead the ratchet. Dont get me wrong but if you get a lose fastener you can put your life at risk or third parties. Good Luck!

[@gonz5659]

Awesome job 👏 thanks alot for the video

[@kieranriordan1908]

Awesome job, awesome video! Way to go guys, both you and the cameraman are both champs! clearly explained, safety precautions, well done.

[@SVPractical]

Kieran Riordan thank you, glad you liked it, and hopefully it was helpful to you

[@marcosbertozzo3193]

Just replaced my break pads! Thanks! Great video!!!

[@cali4l]

Very helpful. thanks. I'll use this as reference

[@freedomfyter]

Nice job guys!

[@diegovieyra6951]

Thanks Man...

[@SVPractical]

Diego Vieyra you’re welcome 😉

[@asumadre9588]

I bled the brakes now it's so soft like I have to push the pedal all the way down. All I did was change the break fluid is this normal?

[@carlosperezworks]

Great video and steps. Do you take cap off the brake reservoir to relieve pressure before you compressed the caliper with the C clamp?

[@SVPractical]

Carlos Perez yes we do, we forgot to mention that. Thanks for the heads up.

[@tempusfugit6820]

Where is the wheel you pushed under the car after jacking it up?? It vanished 2:50.... That rotor would rip your knee off at 3:23 if the jack was to fail. You are working dangerously. Get a jack stand! Thanks for the video but show the safe way of doing things.

[@SwagMaster824]

Sweet video guys. How much did you pay for the rotors and the new brake pads ?

[@SVPractical]

LIT GOD thank you, the person that we did the job for only paid $120 on ebay

[@bookreaderlabarr]

on ebay is 66$ for pro quaility brakes. look at max breaks

[@mindiseverything5036]

good stuff bro how much would u charge to do a brake job for someone ?

[@SVPractical]

Free Spirit for a job like that we do it for around $50 and a 12 pack lol

[@mindiseverything5036]

sounds like a good deal!

[@freedomfilledlife]

Do you know the torque specs on the 14 mill and the 17 mill

[@SVPractical]

To be honest no not really, I think we googled stuff when we had questions about things like that.

[@SwagMaster824]

I have a question again guys. My brake pads and rotors set did not come with the little silver bar shown at 10:12 to hold the brakes in place. Do I need that part or not because my old brakes did not have it in there and I already changed my brakes

[@SVPractical]

LIT GOD well we used them because it came with it in the set, every manufacturer is different

[@jakeflane2218]

Do you need to add break fluid?

[@SVPractical]

Jake Flane no, unless your low, or doing a brake fluid flush

[@jacobsvideo96]

best rotor for the job: amzn.to/2ZP4xbk

[@dreamtuber4707]

You know do old brakes pads are not good

[@alohaguapo]

Mickey Mouse brake repair. Amateur video. Check please !!!!!!

[@yamilehtrivera3935]

Lo haces pésimamente mal y lo peor es que quienes te ven y no saben ,piensan que es así ,si uno no sabe es mejor no meterce y dedicarte a otra cosa en la que si sepas ,el pistón antes de contraerlo ,debes abrir el tornillo de purga y ponerle una pequeña mangera trasparente y está a un recipiente para poder ver cuánto del líquido salió para reponerlo ,del modo que lo haces es muy malo por qué obligas al líquido a presionarce y eso ocasiona mucho daño a todo

[@SVPractical]

Alexander Rivera Redondo la tapa del deposito del liquido de freno se abre, antes de comprimir el piston, eso se ase, y como yo no le pago a supuestamente mecánicos que te quieren cobrar $400-$700 dólares, por cambiarte las pastillas de frenos, cosas que lo que gastas en partes son alrededor de $60. Yo no pago., o cambiar pastillas de freno lo enseñan en la secundaria. Y cambiar frenos lo hemos hecho un monton de veces sin problemas a todos los carros que tuvimos en nuestro poder. Y Gracias por mirar el video y comentar.

[@yamilehtrivera3935]

@@SVPractical que no le pagues a supuestamente mecánicos está bien ,pretender que sabes lo que sabe un mecánico es otra muy distinta y por cierto se abra o no se abra la tapa del depósito del líquido de frenos no tiene importancia ya que abrí la válvula de purga y por ahí sale el líquido ,pero con tu método para no pagar mecánico que no sirve lo que logras es que el líquido de frenos salga y manche todo o tener que llenar aquello con paños ,lo que al final demuestra que mejor te dediques a lo que si sepas ,si es que hay algo que sabes ,zapatero a tu zapato

[@SVPractical]

Alexander Rivera Redondo ok, si tu lo dices, nunca he tenido que limpiar nada, nada se rebosa, mejor grava un video y lo subes asi nos puedes ilustrar como hacerlo. Pero continuaré haciendo lo que hago. Y creo que hay muchos videos de mecanicos por KZbin que tambien hacen lo que hacemos nosotros. Pero como digo sube un video y nos “educas”. Oh y tambien hemos cambiando motores sin problemas. Pero necesitas ser “mecanico” para hacerlo si sigo tu logica.,

[@yamilehtrivera3935]

@@SVPractical nunca leíste ,no eches las perlas a los cerdos ,no sea que estos se vuelvan y con sus pezuñas los despedacen ,sigue adelante

[@gomez_4runner]

Alexander Rivera Redondo por k siempre los paisas valen verga? En ves de apoyar andan de mamones? Ya raza ya vasta con esas mamadas y si este video no le sirvió a usted pues para mucho de nosotros si compa asi que pongase las pilas