2007 YZ250 Full Rebuild

[@ahole5407]

Wish kids these days understood how having something simple and clean is the way it should be. Not all the over the top flashy garbage.

[@marvinmartian3671]

To each there own man alot of people enjoy building bikes makes them care more about it instead of just beating the crap out of it and destroying it

[@positivecarry07]

I’m confused, isn’t this simple and clean. The bike was a clapped out POS prior to the build.

[@Coopdegras]

Ex mechanic, rider and ocd like you wouldn't believe! your builds are some of the cleanest most in depth I've seen online some great work man sending some appreciation from the other side of the pond 🇬🇧

[@MotoScrub]

Appreciate the kind words! Cheers!

[@raulmartinezmunoz8913]

Esta muy bien 👌

[@mysteurs5609]

On on peut trouver ce kite déco svp ?😊

[@falconx5744]

Lol you sound like me. OCD hard 🤦🏻‍♂️ but I wouldn’t have it any other way. Retired mechanic but still restoring my own cars and motorcycles, about to but myself a 2007 yz 250 thats low hours, but im sure il strip it and well.. you know how it goes 😂 from Australia 🇦🇺 buddy Happy New years!

[@wjb111]

And I thought my low hour 07 YZ250 looked good 😂. Your build is amazing!

[@islanddoggear]

I’d kill to find a channel that did full blown video tutorials on all things dirt bike mechanic related. Like how to rebuilt a top end, carb, pulling bearings, etc. with explanations on why you do certain things etc. Would be so helpful

[@cw3728]

I future say.. I'd love to find a channel. There is no need to kill anything

[@islanddoggear]

@@cw3728 it’s a figure of speech, but I’d ACTUALLY kill to make you stop talking.

[@cw3728]

@@islanddoggear I understand American, but I make you sound feral and savage like a south American! Just trying to teach you a bit of etiquette, you'll go further.

[@YZ250W1]

Still riding my 07 and loving it.

[@TwoThreadsAhead]

Ryan Peterson is one lucky dude that's for sure! Excellent work 👍

[@positivecarry07]

Fender’s waggin’, she’s a happy girl!

[@clutchitsystems100]

I just rebuilt a Pro Circuit suspension-ed (front and rear) 2003 YZ250. Love the power of YZ 250s.

[@Natedoc808]

when the rear fender flutters, she's running like butter

[@SwiftedFilms]

Great vid , no one was talking the whole time and it was at perfect speed to watch and not get bored , subtitles were nice touch too , I watched this while I ate thanks bro

[@MotoScrub]

Haha awesome. Glad I could make your meal that much better! 😁🤘🏻

[@fosterschutt6125]

I just went through my ‘16 with a comb and yours makes mine look like its been thrashed with that vapor blasting. I would love one of them some day for builds.

[@jtgross2324]

Man nice video! Building bikes is so rewarding, I just rebuilt an 02 CR250 and enjoyed rebuilding it just as much as I like to ride it!! Me and that vapor blaster would be best friends if I had one!

[@marcradzilowski7450]

High quality workmanship! You are a true craftsman! 👍 Very nice!

[@MotoScrub]

Appreciate it! Thank You!

[@stihlms]

Best yz build on KZbin period!

[@JR-ut1yx]

First thing I noticed is the darker blue rims, awesome choice 😎

[@MotoScrub]

Wow, good eye!

[@usmc03]

Awesome video!!! You make it look so easy. You have probably forgotten more than I will ever know. Fantastic job!!!!

[@MotoScrub]

Thank You, I appreciate it! haha

[@joesquidfilms19]

The colors scheme is amazing; the rims, plastics, pipe, triple clamps, and bars on top of all that perfectly restored parts look crazy good! Good job man, love the content👍

[@kevincastro7880]

Extremely clean job !🔥

[@matheusciciliote8236]

Nice job man!!! A bike like that in Brazil would cost a fortune R$$$$$$$

[@keijahproductions]

amazing build man, love the oem and a bit of the aftermarket style

[@MotoScrub]

Glad you like it! You have good taste. hehe

[@chelovek_vne_zakona]

Потрясающая работа, браво ребята!

[@adamhill2788]

Im about to find me a similar year/frame of yz250 and do a stock-mod build...only new bike on my local yamaha showroom floor is the yz250X...super sick build you did🤘

[@Jkb90]

You just got a new sub! Great content and high quality! Do you vapourblast your engines fully assembled? If so, what do you do to prevent any media to enter the engine. I see this topic all the time on forums and fb. Greetings from norway.

[@MotoScrub]

Thanks for the sub, glad you enjoy the content! ^^ Regarding the motor blasting. Yes, it was blasted whole. I take great care in blocking all the areas that can get media/water before blasting. If you do it right it can be done!

[@davidkanalos6710]

You are a great mechanic! 👍

[@MotoScrub]

Thank You!!

[@hendrikvanderwalt5866]

YOU JUST GET POEPLE WHO CAN DO THE JOB..... REALLY RESPECT 👌👌👌👌💯💯💯💯👍👍👍👍

[@MotoScrub]

Appreciate it! Thank You!! 👍🏻🔥

[@rolfinator37]

I installed the top valve body on nine with the rod fully extended. That's how you're supposed to do it?!

[@michaelmitchell5909]

I can't believe how incredibly bad ass this is....extremely nice e job man. ..

[@MotoScrub]

Appreciate it! Thanks!! 🤘🏻

[@kadian299]

I've got a '02 426 i want to rebuild like this but its sooooo daunting when the most you've ever done is replace a carb on a lawnmower...

[@gabekenyon4882]

It's pretty easy just take your time and use the manual

[@falconx5744]

Beautiful mate! Awesome job 👌😍

[@pedaleando9998]

Una belleza de restauración y excelente moto YZ250

[@scottfairbrother]

Beautiful, Beautiful bike. Your work is exceptional!!!!!!!!!

[@MotoScrub]

Thank You!!

[@Brian-k8t]

Love the build!! Where did company did you get the decals from? Much better quality than what I've seen. Mahalo!

[@MotoScrub]

Appreciate it! The graphics are Yamaha OEM 👍🏻

[@umaira.5662]

super clean , bike build and video!

[@jujigatame7820]

Awesome, bravo what a clean work ...

[@sqd37l]

that was amazing. keep up the great work!

[@murrayroberts1513]

awesome job really enjoyed the video. How many hours would you say total?

[@adamhill2788]

Daamn what a clean build, well done🤘

[@MotoScrub]

Thank you, Glad you liked it! 🤘🏻

[@adamhill2788]

@@MotoScrub I'm going to look at a 07' yz250 that's all OEM and never rilly had maintenance done to it...$4K for the bike then gonna strip it down/rebuild n rip to 99% of your build n parts🤘

[@adamhill2788]

@@MotoScrub any pointers on the 07' tear down/complete rebuild to be aware of ??

Thật vui khi được xem sự phục hồi chiếc xe một cách thận trọng, cảm ơn bạn

[@gregorgeiger8385]

Good job! It was my pleasure to watch this video! Regards from Germany

[@MotoScrub]

I'm glad you enjoyed it! Cheers!

[@bielbills]

Outstanding!

[@jerrykadingilan899]

I wished , theres a man who sent me like this beautiful dertbike....I wish........

[@rockman49er]

Nice but why is the silencer crooked is ir the wrong one 😮

[@renatoaparecidodonasciment6622]

Two stroke forever ✌🏽👊👀🚀🚀🚀🧏🙋

[@budiutomo1697]

Insha Allah suatu saat nanti gw juga bisa beli ntah kapan

[@christopherohotto]

Sharp. Nice ride briggity braap

[@easley421]

Damn bro I don't even want to know what you paid for the Yamaha hardware. Usually go to the hardware store. I went to the dealership to get clutch basket bolts for a Fireblade. They were 4.95 a piece and not even hardened?!?!!?🤣🤣🤣 Took my ass straight to the hardware store. Even if I got it I'm not giving it to them. Highway robbery. I understand why you do it, just laughed out loud when I seen it all sitting there in a pile. The first question I asked myself was "how much did that cost"!? Excellent work buddy. Love to see other human beings take the time in what they do and do it right

[@MotoScrub]

The bolts are from "Spec Bolt". They make model specific kits for engines, body work, etc. They even have different finishes! Much better than the mismatching hardware store bolts 😜

[@roninahkala]

Hey! can you tell me what are the wires/sensors coming from the carburator of the yz?

[@mcwimps7208]

Very cool build man loved the video, just a question, what year were the plastics you used and can I use any year for my 09’?.

[@MotoScrub]

For your 2009. As long as you use the updated airbox (2015+) you can use any 2015+ plastics. Rear fender, side number plates, and shrouds. Front fender and Front number plate were Cycra restyle plastics.

[@jessieaguilar1205]

@@MotoScrub what about an 05 does that work too?

[@Mateo.Martin114]

Love the build 🤙

[@dytekRD]

Absolutely love the build! great job on it. I'm very curious though. Did you vapor blast the engine while assembled then just replace the top end? I reached out to a few places to see if it could be done when I was building my rm and they all refused. Is this something you've had good luck with? Again, great work!

[@MotoScrub]

Thanks for watching! Yes, the engine was first blasted whole. Then the top end was done afterwards. Have blasted many whole motors, it is critical to block/mask all open areas before blasting.

[@alammanusia1284]

Great Job dude....that' s awesome.....

[@Hobbiesoverhumans]

Great build !!!

[@MotoScrub]

Thanks!! 👊🏻🙌🏻

[@eruelsbike9677]

wow so clean

[@troydimsdale2331]

Sweet bike. Not sure why the purple rims though.

[@MotoScrub]

They are blue Excels. Just terrible camera/lightwork from me 🙂 haha

[@Vdsanti]

My therapy no doubt

[@팝콘-p3y]

Nice

[@donbrashsux]

Very nice !!

[@ononewheel7]

Nice work 💪

[@MotoScrub]

Thank you very much!

[@MiazgaGarage]

Very good mechanic

[@MotoScrub]

Thank You! 🙌🏻

[@derykbeaudreau7761]

should've left that Wiseco piston in it. Forged pistons are are far superior to the junk OEM ones

[@steliosapergis]

Good job👍 . The wiseco piston why Changed with original ?

[@MotoScrub]

Customer had just purchased the bike and did not know the condition of motor. Bought new parts for piece of mind 👍🏻

[@davepalmatier5190]

BEAUTIFUL BEAUTIFUL 😊

[@BillyBoblovesthedirt]

Nice work. Bet that cost a few bucks.

[@brainstain22]

Thats a sik bike. I'd kill for the shop though.

[@adamjones3177]

So clean!

[@frah_nd]

hello where can i find the wrench you used to remove the steering bearing? Congratulations for the video. Greetings from Italy

[@MotoScrub]

Motion Pro - Steering Stem Tool I highly recommend it! Makes the job so easy and painless 👌🏻

[@Mayank_8]

Fire...🔥🔥🔥🔥🔥🔥🔥🔥👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻🤞🤞

[@kevinclark5086]

I didn't see much wrong with the old piston. It looked quite new.

[@MotoScrub]

The customer was not sure the condition of the motor when they bought it so they wanted to change it for peace of mind. 👍🏻

[@Jdebban77]

Great work, What rear brake spring are you using?

[@MotoScrub]

Thanks! "Fasst Company" rear brake return spring. They offer different colors too 👍🏻

[@elmatador669]

my dream !!!! nice job

[@pierre9655]

I’m french but the motor bike is just amazing 🤯🤩

[@listentobala]

Wonderful

[@kpbrothers6732]

Amazing. .good job.....

[@Eaugustopriv]

Muito bom , eu aqui do Brasil me inspiro em você

[@Dimi000]

amazing!

[@kleberastillerofernandes809]

Hi, you are amazing, I am a mechanic and I wanted to know the name of the tool you used to remove the steering gear. If you have the link, even better, thanks in advance.

[@MotoScrub]

Thanks! I believe you are asking about the steering race remover..? Here's the link: www.motosport.com/Motion-Pro-Steering-Head-Race-Puller?variant=MOP00BE-X001-Y001&variant[MOP00BE]=MOP00BE-X001-Y001 Makes the job super easy! Good luck!

[@agustinjs9406]

CR 250 next plss

[@dennisbagatin4480]

Sweet nice job!👌✌️

[@michele1342000]

I mean the old engine looked pretty good already

[@MotoScrub]

Customer was not sure of engine condition. As a precaution they wanted it rebuilt and had already purchased the new engine parts. 🤙🏻

[@saracarrasquilla6955]

Amazing

[@matthiasgonzo9281]

How much did you buy it? How much did you spend on it? And how much is it wort now? Ples i will be relly happy if you can anser me this questions

[@HuskyRider250TC]

Awesome❤

[@allenmcswain5151]

Just wonder why you would take out tje wisco for OEM? Wisco makes a better and lighter product less rotating mass faster acceleration. I don't know anything.

[@peterpeter6925-y1k]

clean build , new subscriber here/

[@MotoScrub]

Thank you for the sub! Hope you enjoy the videos 😁 🙌🏻

[@sendit8262]

what are those electronic cables on the carboretour?

[@metkauturbomechanika]

piękna sztuka

[@logannowak4010]

What solvent did you use to clean the frame it came out amazing?!?!

[@MotoScrub]

The solvent is any normal cleaning product, nothing special. The frame looks the way it does because it was vapor blasted 👍🏻

[@positivecarry07]

❤

[@jeffsmith-bf4tz]

WOW!

[@fishing4carp815]

I have 07' yz125 I was wondering what year plastics are

[@LF_Productions]

What do you use to vapor blast

[@xXQUIRKY1992Xx]

When doing the forks was you not worried about mixing from left too right with some of the internal components?

[@MotoScrub]

The left and right almost always have some kind of small knick or something distinguishable. Even if you did switch them though, the internals are the same left and right. 👍

[@pendisiahaan9022]

What is name of the shock oil you are using and what is its viscosity level bro From indonesia

[@mitchiethekid635]

Can someone tell me what year the plastics are meant to fit? I have an 07 that I need to order plastics for and I’d love these.

[@bhaveshjadhav2897]

Either a Yamaha yz125 or a yz250? Please let me know what is the quotation and the price

[@17560]

Good nice

[@ODRoach]

Awesome work!

[@MotoScrub]

Thank You! 🙌🏻

[@davidassayag6634]

Hi. Why do you change the piston? Thanks

[@ElgiSdn]

Mantap

[@gjg1281]

What was the setup you used to pull the steering head bearings?

[@MotoScrub]

Motion Pro - Steering Head Race Puller Highly recommend! Makes it so easy..