2008-2010 INFINITI EX35 AWD 5 Speed Transmission Oil Pan, Fluid & Hoses

- Just a Nissan/INFINITI guy trying to share his work and findings to help others -
Part Numbers:
Nissan Matic-S (x5): 999MP-MTS00P
Transmission Oil Pan: 31390-90X0B
Transmission Oil Pan Gasket: 31397-90X0A
Transmission Oil Pan Bolt (x22): 31377-41X60
00:00 Intro
00:05 Oil Pan Torque
00:10 Pan Bolt Sequence
00:15 Exhaust Bracket Torque
00:20 Oil Pan Inspection
00:43 Drain Plug
01:20 Draining Oil
01:36 Oil Pan Bolts
01:50 B2S2 O2 Sensor Plug
02:33 Exhaust Bracket
02:53 B1S2 O2 Sensor Plug
03:10 O2 Sensors' Bracket
03:28 Oil Pan Bolts Cont.
03:57 More Oil Draining
04:20 Oil Pan Removed
04:26 Filter Inspection
04:41 More Draining
04:52 Oil Pan Magnets
05:20 Plastic Razor
05:40 Prepping New Pan
06:42 Installing New Pan
07:51 O2 Sensors' Bracket
08:04 O2 Sensor Plugs
08:25 Filling Oil
10:37 Checking Level
12:48 Transmission Hoses
19:04 Outro

[@dodo9595]

Thanks for the video. I bought a 2010 with 160k miles. Definitely need to check the ATF.

[@koreancook]

Are the crush washers all the same for the transmission - transfer case - and differential? So many superseding part #’s ;( Thanks for the videos man just in time as i recently picked up a 2016 ex37 too! 👍

[@AwkhuardVQ]

Thank you for the feedback and congrats on the car! For the 370GT/EX37/QX50 (not sure where you are in the world). - The copper crush washers (11026-JA00A) are the same on the engine and transmission drain plugs. - The front and rear differential uses the same aluminum washers (11026-4N200) for both the fill and drain plug. -The transfer case also uses the same aluminum washers (11026-1CA0A) for the fill and drain plug, HOWEVER, the transfer case washers do differ from the differential washers. - (Part numbers are from a USA market vehicle, so I'm unsure if its the same for international vehicles) Hope this answers some questions for you. Thank you!

[@tranglerui]

thanks for your video. have any idea of standard size of the transmission oil pan mounting bolt. M6 or M8 ?

[@AwkhuardVQ]

I believe they're M6. Not sure of the thread pitch though, maybe 1.25.