2008-2012 Ford Escape radio installation

How to replacement radio and acc wire in 2008-2012 Ford escape
/ @homeboysstereo
profile.php?...
homeboys_stereo... #cars #carstereo
#california #oakland #carlifestyle #applecarplay #android #androidauto #applephone #facebook #instagram #subscribe #cars #videos #shorts #shortvideo #shortclip #youtubeshorts #instagramshorts #ford #escape #radio #replacement

[@carlostrimarchi1597]

I have a question about the subwoofer, there are 2 blue cables in the aftermarket arness to connect it, but the output volt in the radio is 12v to turn on any amp, when I conneted mine I hear a sound of boom and long bee so I disconected, so I wonder Will I to reduce the voltage of the wire output to turn on the amp to 12v to 5-6volt?

[@homeboysstereo]

Are talking about popping noise from stock subwoofer when you turn on and off you car?If stock subwoofer you might try 1.5k resistor between blue/white wire

[@carlostrimarchi1597]

I will try in mine tomorrow, i dont want to buy the interface module and my car has the sync with no acc 12v line directly, your video show me the fuse location to get the acc, thx.

[@homeboysstereo]

Thank you for watching and I will be appreciate if subscribe to my channel too

[@carlostrimarchi1597]

@@homeboysstereo already thank you

[@josemarroquin1663]

I have a question, where do I get the aftermarket radio wiring adapter?

[@homeboysstereo]

Thank you for watching my channel Diagram should be in the box of aftermarket radio or you could get from online search for radio diagram I will be appreciate you if subscribe to my channel

[@PINABRIGUGLIO]

i8s the same radi8o for 2013

[@homeboysstereo]

Thank you for watching my video and I will be appreciate you if subscribe to my channel

[@hectorramos4773]

I have the radio plug and I have red coming out of the car and red coming out of the radio and it doesn't turn on the way I want I have to take out the fuse wire for it to turn on

[@homeboysstereo]

Thank you for watching my video and I will be appreciate you if subscribe to my channel too Red mean acc wire red color? You might have to run acc wire from fuse box to red wire of your aftermarket radio or you could use interface harness that way you don't have to run acc wire

[@hectorramos4773]

@@homeboysstereo thanks you

[@homeboysstereo]

@@hectorramos4773 you are welcome please subscribe to my channel too

[@ericprice5316]

I have a 2009 mazda tribute with factory system. The radio works sometimes. I have the factory amp and sub as well. Can you please help me?

[@homeboysstereo]

It might be one of speaker blown out so your factory amp on protection or your factory amp might malfunction if could be anything so you should give out specific issue By the way thank you for watching the my video and I will be appreciate to subscribe my channel too

[@ericprice5316]

Thanks. I noticed my driver side speaker doesn't play. Maybe that one might be blown. The radio comes on. Also I noticed when the radio and middle console is on and I open any front door it cuts off.

[@homeboysstereo]

@@ericprice5316 first I appreciate that subscribed my channel and that is the symptoms that one of your speaker blown out hopefully fix the issue with replace speakers and please let's us my audience know that if you solved the issue after replace speakers Thank you again!!!

[@ericprice5316]

@@homeboysstereo I got a 7inch radio rated for 4 to 8 ohms. My tribute has factory speakers rated at 4ohms. Will those work with the aftermarket radio?

[@homeboysstereo]

@@ericprice5316 yes if your speaker is 4ohm will be compatible but don't hook any additional speaker just 4 speaker and I recommend name brand aftermarket head unit