2009-2018 RAM LED Tail Light Conversion | AnthonyJ350

If you're looking to swap your halogen tail lights over to LED, we convert a 2012 Ram tail light over to the new LED style from a newer truck.
Conversion Harness: esskcustoms.com/products/ram-...
#RAM #TAILLIGHTS #LED
Subscribe for more automative tips!: bit.ly/sub2anthonyJ350
Watch my most popular uploads!: bit.ly/anthonyJ350howto
Check out my Amazon storefront www.amazon.com/shop/anthonyj350
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com/shop/anthonyj350
E-Mail: [e-mail]
T-Shirt: teespring.com/en-GB/AnthonyJ3...
Music available - www.jinglepunks.com & www.epidemicsound.com
Intro - "Heartbreaker'" - Gloria Tells
Outro - "I just can't change my Emotions" - Basixx
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
2009-2018 RAM LED Tail Light Conversion | AnthonyJ350
• 2009-2018 RAM LED Tail...
ANTHONYJ350
/ anthonyj350

[@ProMountainBiker]

That is not how you remove the lights, you simple pull towards the back of the truck and they slide off the clios

[@AnthonyJ350]

Thanks for the tip!

[@jeepetoa4848]

You should update the video so someone does not damage their truck.

[@kriswibbenhorstermeister9885]

I was going to say this too. I was getting anxiety just watching it. Just pull forward and they slide out.

[@HipHopHead80]

I remove these all the time at work to run wires for the CHMSL on toppers/caps. Undo the 2 screws then stand behind the taillight and pull straight back towards you. The light will slide right off the clips then the clips are fully exposed and you can remove them with a plastic pry tool or something or just leave them in there for the new light to slide onto. No need to pry against the truck bed like that. That made me cringe a little. 😬

[@AnthonyJ350]

Thanks for the tip!

[@RobertLaneTech]

We do the same at my work for replacement bulbs

[@omgpancakesyum]

God this was so hard to watch. Inexperience at it’s finest.

[@glenngriffin9449]

can you replace fac tail led lights with incandescent lights if the truck has cam-bus in it 2016 dodge ram sport

[@AnthonyJ350]

That I'm not sure.

[@hermanguy4276]

Thanks

[@AnthonyJ350]

Thanks for watching!

[@juanpestrada5231bdndjkdn]

Do you guys have the convertion from 2010 ram alogen to 2019 leds?

[@AnthonyJ350]

Check out the site in the description, they might have it

[@molvera4192]

Thanks for the video, where can I buy those connectors?

[@AnthonyJ350]

I put a link in the description for the parts.

[@mr.cumminshrdz9692]

How come i cant see the link to those connectors

[@johnebuckland]

Fantastic video i of a basic upgrade. I much appreciate the idea of the split loom. I know the trick and have used it in my engine bay. But areas like this is really is super quality measure👌👌

[@AnthonyJ350]

I'm really glad you like the little tricks

[@santosoresteacostaiii1596]

THE “HARNESS CONVERSION” WHERE CAN I FIND THAT??? OR A FACTORY LED CONVERSION FOR A 2017 1500 LARAMIE LONGHORN?

[@AnthonyJ350]

I put the link in the description.

[@santosoresteacostaiii1596]

THANKS! JUST TO BE CLEAR THAT WOULD MAKE MY FACTORY LED TAIL LIGHT ASSEMBLY COVERT MORE INTO PLUG AND PLAY FOR OTHER LED STYLES?

[@AnthonyJ350]

@@santosoresteacostaiii1596 Not sure, it's to go from Halogen to factory LED style taillights

[@jrrrivas6441]

i used those on my 2010 and they work but tells me im blinkers dont work how do i fix that

[@AnthonyJ350]

You need load resistors kzbin.info/www/bejne/hH7SinqHnalleqs

[@jrrrivas6441]

do u know what size resistor 2010 dodge ram back lights ama try it tomorrow

[@AnthonyJ350]

@@jrrrivas6441 50 ohm load resistor should be fine. Just make sure to mount it to metal.

[@djmikesea]

DO NOT PRY ! Simply undo the 2 bolts and pull straight back ! dam the wiring adapter is as expensive as new tail lamps lol !

[@AnthonyJ350]

But still better than having a new truck payment.

[@TheMcooper17]

or if you took it to UK you'd be legally requiered to fit an amber turn signal. usually in reverse place or screw it into the bodywork

[@AnthonyJ350]

Are there full size 1 tons in the UK?

[@TheMcooper17]

@@AnthonyJ350 we do have pickups, but nothing like north america, the all in one you demonstrated wouldnt be legal here

[@AnthonyJ350]

@@TheMcooper17Ahhh ok. I do agree with amber signals. I will be converting my personal truck to have amber signals and go over the benefits.

[@TheMcooper17]

@@AnthonyJ350 i'm not against ambers, its common in europe, just not in private american importd that were never made for european market

[@AnthonyJ350]

@@TheMcooper17 Ambers are more noticeable. You get desensitized when the light is all read.

[@NX4Gallo]

Link for tail lights?

[@AnthonyJ350]

Bought them at our local auto parts store. The brand was DEPO.

[@alfredorodriguez4285]

Can this work for a 2011 ram?

[@AnthonyJ350]

It should, the body should date back to 2009

[@alfredorodriguez4285]

Ok because I have a 2011 1500 and I’ve seen that those won’t fit a 2011 but I’m not sure if that was without the connectors

[@alexq5538]

@@alfredorodriguez4285 did it work? I have 2011 too

[@Posibrian]

Instead of using metal pick to pry it out you could of used a plastic trim remover. I'm sure you're aware of that though.

[@AnthonyJ350]

Yup I show a plastic trim remover. I'm just proficient with the SnapOn one.

[@rootiest]

u dont have to pry it like that. u pull straight back that way its much easier

[@AnthonyJ350]

Thanks for the tip!

[@pupetm]

will this cause any error codes ?

[@AnthonyJ350]

No it shouldn't.

[@brandedmcgowan9414]

Since it has a built in resistor it shouldn't hyperflash.

[@jimbrate9844]

I would like to ask a few questions, got time for response on pm

[@AnthonyJ350]

What's your question?

[@jimbrate9844]

@@AnthonyJ350 I had a set of Spyder taillights color matched to my 2021 Ram 1500 new gen….I didn’t not catch that he had ordered and done a set of 09-18 LEDS. My harness is a Molex 33472-1260 to a bulb socket and the new assembly is 3157 male plug. If I just just make a harness is that going to result in tons of codes on my truck?

[@AnthonyJ350]

@@jimbrate9844 It just sounds like so much work and not worth the Hassel, as opposed to getting the part with the correct plug.

[@jimbrate9844]

@@AnthonyJ350 lol, there is the issue, there is no right part!!! I will probably try to sell them, interested? Haha

[@AnthonyJ350]

@@jimbrate9844 This was my buddy's truck. I drive an old Chevy lol. Why not just install LED replacement bulbs from Phillips or Sylvania and run load resistors on the turn signal circuits?

[@wethepeople7629]

$190 for that harness is a huge ripoff

[@AnthonyJ350]

It works and it's a major safety item.

[@omgpancakesyum]

You clearly have no idea how expensive those OEM plugs are, and the resistors and drivers. Not to mention the extensive hours spent in research and development by RetroShop LLC to figure this adapter out and make it work 100% without issues. Also the time spent hand building each harness.

[@wethepeople7629]

John C Are you kidding me? Those are Made in China lol. I know because I had the headlight conversion kit. It looked cheap and crappy made just like the one in the video.

[@fabiandelgado7321]

I make these, I just use morimoto HD Resistors, work perfectly fine

[@MrWedlake]

@@fabiandelgado7321 make them and sell them ? I’d be interested

[@kenlogue]

You are showing how to remove the tail light assembly the wrong way. Just pull the fixture straight back. Don't pry it off to the side of the truck. There is not need to ruin the paint and break the retaining clips. Do not use a crowbar. Just pull it toward the rear of the truck with your fingers. Redo the video!!!

[@AnthonyJ350]

Not a cross bar, it's a panel removal tool

[@AnthonyJ350]

I didn't damage it though. We took a similar approach to removing door panels and bumper skins.

[@jdmac8584]

😂 truck all rusted and puts tape

[@AnthonyJ350]

Put in the same effort no matter the condition of the vehicle. Wouldn't you want me to treat your vehicle with the upmost care if you paid me to work on it?

[@jdmac8584]

@@AnthonyJ350 my bad. I was just talkin 💩 😆

[@jdmac8584]

@@AnthonyJ350 thanks for reply though

[@AnthonyJ350]

@@jdmac8584 Thanks for watching

[@rafaelbattle770]

Hi friend, You are doing that the wrong way! My God, why you do that? All you needed to do was unscrew the two screws and pull the light back (towards the back of the truck not sideways) This is the easiest thing to do and you broke the clip for no reason. They just slide back! Sorry but...Wow!

[@AnthonyJ350]

Thanks for the feedback!