Tap to unmute

2009 Audi A3 Clutch & Fly Wheel and CSC Replacement

  Рет қаралды 26,242

R4UL TV

R4UL TV

Күн бұрын

Пікірлер: 95
@PictureProStudios
@PictureProStudios 2 ай бұрын
Great video. I would say I have a big average DIY skills. How many hours roughly would I budget for the job ?
@TEAMR4ULTV
@TEAMR4ULTV 2 ай бұрын
I would say give yourself two days to do it. Nice and easy one day to take it off and one day to put it back on. Thanks for watching really appreciate it
@Cocovlog283
@Cocovlog283 2 жыл бұрын
When your replacing dmf . Do you have to replace to clutch ?
@TEAMR4ULTV
@TEAMR4ULTV 2 жыл бұрын
Yes I would replace the clutch
@Cocovlog283
@Cocovlog283 2 жыл бұрын
@@TEAMR4ULTV thats sad because i just replaced the dmf but I didn’t replace the clutch ☹️🤦🏽‍♂️
@TEAMR4ULTV
@TEAMR4ULTV 2 жыл бұрын
@@Cocovlog283 you would have had to take the clutch off to replace the DMF should have replaced. Hopefully clutch has got many more miles left in it.
@worbarry9735
@worbarry9735 Ай бұрын
recently bought my audi a3 and clutch was done less then 5 months ago but the original owner only paid to replace clutch not flywheel idiot would i be ok to just replace flywheel or recommended to replace whole lot again? don't understand why he made the decision lol
@wadebrown8254
@wadebrown8254 4 жыл бұрын
I need a deal mass flywheel replacement for my 07 audi a3 2tdi were should I buy from what make do you recommend
@TEAMR4ULTV
@TEAMR4ULTV 4 жыл бұрын
I would prefer Luk or Sachs dont go fitting anything else Also dont buy from ebay. You can buy luk or Sachs from ebay but for some reason not the best maybe grade b or something. Local spare shop will be the best. Another place is Auto doc there not to bad hope that helps
@thegiver2024
@thegiver2024 4 жыл бұрын
So glad you made these 2 L diesel videos
@alex2stan76
@alex2stan76 Жыл бұрын
I like your enthusiasm, and video is very well made , thanks
@porteuni
@porteuni 3 жыл бұрын
i have a A3 2.0 tdi quattro , audi diagnosed a "bad flywheel", among a million small things as well (not my concern at the moment) they want 2.5 k to repair (almost died when i heard the number). So when I'm starting the car I'm hearing a kind of metallic noise specially when the car is warm, I've change the battery cause it was old, the metallic noise went down a bit. also i feel a bit of vibration on 4th gear only. Is this could be fly wheel? starter? or cutch? thanks cool vid
@TEAMR4ULTV
@TEAMR4ULTV 3 жыл бұрын
To be honest it dose sound like the FLYWHEEL, but also get the Alternator Clutch pulley checked or replaced because it's not that expensive to Replace that. Might be AC COMPRESSORS, but most likely am going with FLYWHEEL, or Alternator clutch pulley, but its Madness £2500 for a clutch and flywheel Replacement wow. That too much max I would say £1000
@TEAMR4ULTV
@TEAMR4ULTV 3 жыл бұрын
But really I would get the Alternator pulley checked
@porteuni
@porteuni 3 жыл бұрын
@@TEAMR4ULTV actually I did check alternator charging test came out as low. Ya a friend actually charge me 1k with a sachs parts. i would check that mate thanks very helpful !!!
@TEAMR4ULTV
@TEAMR4ULTV 3 жыл бұрын
@@porteuni no worries happy to help. THE Alternator might be charging but the Pully might be faulty
@porteuni
@porteuni 3 жыл бұрын
Happy days thanks buddy !!!!
@shelfromthehighway4728
@shelfromthehighway4728 3 жыл бұрын
Do I have to remove the passenger side axle flange to drop the trans? Mine is stuck, 6mm bolt stripped but it’s the only thing left before I can get trans out. Wondering if I can wedge the gearbox off without removing it?
@TEAMR4ULTV
@TEAMR4ULTV 3 жыл бұрын
You could but will be a little struggle but can be done
@shelfromthehighway4728
@shelfromthehighway4728 3 жыл бұрын
Nice. Thank you!
@Richieesgarage
@Richieesgarage 2 жыл бұрын
whats the Torque spec for the Clutch & flywheel
@TEAMR4ULTV
@TEAMR4ULTV 2 жыл бұрын
Al be honest just look it up on Autodata. But to be honest I use a breaker bar and just do it tight as I can but if you want the torque setting bear with me
@seat786
@seat786 3 жыл бұрын
Excellent upload, what would you charge for complete clutch/DMF replacement (supplied & fitted) on an Audi A4 B8 2.0tdi 2009. I'm in Cheshire so not far, many thanks!
@TEAMR4ULTV
@TEAMR4ULTV 3 жыл бұрын
Thanks for watching, Your looking around about £750
@seat786
@seat786 3 жыл бұрын
@@TEAMR4ULTV Thanks for replying, that sounds about right. Can I get your details?
@TEAMR4ULTV
@TEAMR4ULTV 3 жыл бұрын
@@seat786 Am in hyde Cheshire Sk141bw
@technoplanet1016
@technoplanet1016 4 жыл бұрын
What brand was the slave you put on? Thanks
@TEAMR4ULTV
@TEAMR4ULTV 4 жыл бұрын
Al be honest customer got the parts dont know what make it was. But I would use sachs or Luk
@technoplanet1016
@technoplanet1016 4 жыл бұрын
@@TEAMR4ULTV so does the Sachs slave work with the LUK clutch kit? Are the luk and Sachs slave cylinders interchangeable? Thanks
@TEAMR4ULTV
@TEAMR4ULTV 4 жыл бұрын
@@technoplanet1016 I dont thinks so luk with luk. Sachs with sachs
@technoplanet1016
@technoplanet1016 4 жыл бұрын
@@TEAMR4ULTV That explains my issues. Many thanks for the replies. Much appreciated.
@TEAMR4ULTV
@TEAMR4ULTV 4 жыл бұрын
@@technoplanet1016 no worries
@wadebrown8254
@wadebrown8254 4 жыл бұрын
also how long did this take??
@TEAMR4ULTV
@TEAMR4ULTV 4 жыл бұрын
To be honest it's not a very hard job just lots of things to take off. If your a mechanic non stop working on it takes me about 1h to take it off about 2hs to put it back together, if your attempting it for 1st time give your self easy 4 to 5hs Also it's very HEAVY
@rizv6396
@rizv6396 2 жыл бұрын
Where is your garage pal
@TEAMR4ULTV
@TEAMR4ULTV 2 жыл бұрын
Am in Hyde Cheshire
@Nix_sound
@Nix_sound 3 жыл бұрын
Great video mate. Sub added
@LITTLERASCAL210
@LITTLERASCAL210 3 жыл бұрын
Hiya pal great video How much would this usually cost. TIA
@TEAMR4ULTV
@TEAMR4ULTV 3 жыл бұрын
About £700
@moshinjussab2163
@moshinjussab2163 2 жыл бұрын
Whats the cost of clutch/flywheel replace audi a3 2008
@TEAMR4ULTV
@TEAMR4ULTV 2 жыл бұрын
Thanks for watching really appreciate it. For full job parts and labour around £700
@RUBZZZ29
@RUBZZZ29 Жыл бұрын
What about for a automatic a3 1.6 diesal, I’m gonna pay around £1k
@jattdaputt1
@jattdaputt1 Жыл бұрын
Hey bro what will you u charge me to do same job can you send yr details
@TEAMR4ULTV
@TEAMR4ULTV Жыл бұрын
Hi price wise your looking about £800
@jattdaputt1
@jattdaputt1 Жыл бұрын
@@TEAMR4ULTV please leave me a contact email or number I will contact you immediately thx
@AhmedAli-lv5wo
@AhmedAli-lv5wo 3 жыл бұрын
Bro good job 👍. Can i replace DMF to solid flywheel? Will it be any problem after installation? Some garage says, wouldn’t be any problem may be will make vibrating or shake. Let me know please
@TEAMR4ULTV
@TEAMR4ULTV 3 жыл бұрын
If it is interchangeable the only thing you might find is the clutch pedal is slightly harder. Only slightly
@shaynemclane6391
@shaynemclane6391 3 жыл бұрын
Does anyone happen to know if this is the same for the 2.0t gas
@TEAMR4ULTV
@TEAMR4ULTV 3 жыл бұрын
It should be similar, if it's the petrol one it should be even simpler
@shaynemclane6391
@shaynemclane6391 3 жыл бұрын
Thanks man I appreciate it
@gussyhedge6124
@gussyhedge6124 3 жыл бұрын
I got a Audi A4 B5 what the best clutch to go with
@TEAMR4ULTV
@TEAMR4ULTV 2 жыл бұрын
Thanks for watching really appreciate it. I would go with LUK OR SACHS please be aware dont buy off ebay because even if it says LuK or Sachs the quality from online is not the best. Pay that little extra and buy from a reliable parts shop. If your in uk I recommend GSF in uk
@1to10review
@1to10review 2 жыл бұрын
Big job 🙇
@TEAMR4ULTV
@TEAMR4ULTV 2 жыл бұрын
Thanks for watching really appreciate it. Ti be honest it's not too bad
@bijoykb4382
@bijoykb4382 7 ай бұрын
Hi🎉
@thegiver2024
@thegiver2024 4 жыл бұрын
Nobody has really made any. I was thinking about giving it a go on some.
@davidrussell8689
@davidrussell8689 3 жыл бұрын
Excellent video . Well explained . Thank you .
@Smith6265
@Smith6265 3 жыл бұрын
You should’ve cleaned it all before you put it back on,Cowboy Work. Wouldn’t let you work on my car!!! You haven’t even mentioned the torque settings. Bang them back on 😂 There all nice & tight 😂😅😅
@TEAMR4ULTV
@TEAMR4ULTV 3 жыл бұрын
Thanks for watching any if it helped you out nice one if not am sorry
@Liveforeever
@Liveforeever 3 жыл бұрын
It's not an official 'how to' from Audi! 99% of workshops do not torque every bolt unless it's something critical like headbolts, cam bolts, wheel bearings nuts/bolts etc. It's an experience thing that becomes intuitive. I think you are one of those customers that run back to the garage to accuse them of messing the brakes up after a squeeling noise when they've only fitted a bulb 😂
@TEAMR4ULTV
@TEAMR4ULTV 3 жыл бұрын
@@Liveforeever thanks for the comment mate much Appreciated
How to replace the Clutch Kit Audi A3 mk2 2.0 TDI 🚗
34:23
UseTool EN
Рет қаралды 2,4 М.
5 Tips For Replacing A Clutch
7:04
HumbleMechanic
Рет қаралды 2,8 МЛН
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН
Audi A3 no clutch... Fault finding and repair. READ DESCRIPTION!
14:41
LM Auto Repairs
Рет қаралды 177 М.
Battery Coding
7:06
RossTechVCDS
Рет қаралды 1 МЛН
How to Replace a Clutch in your Car or Truck (Full DIY Guide)
32:00
REBUILDING A PORSCHE 911 GT3RS FROM SCRATCH
45:52
Mat Armstrong
Рет қаралды 3,1 МЛН
AUDI A3 8P - COMMON PROBLEMS *BUYERS GUIDE *
10:50
Mati Mcfetridge
Рет қаралды 209 М.
2006 HONDA JAZZ FRONT WHEEL BEARING REPLACMENT
19:00
R4UL TV
Рет қаралды 100