2009 Yamaha V star 650 How to remove front and rear wheels. DIY

  Рет қаралды 34,375

Cliff Cares

Cliff Cares

Күн бұрын

Пікірлер: 48
@littledoggieandajeep7733
@littledoggieandajeep7733 2 ай бұрын
just want to say thanks for this video. even though it is older. it was exactly what i was looking for and exactly as you showed. appreciate the guide.
@laurensgosling8116
@laurensgosling8116 3 жыл бұрын
Just bought this bike, trying to learn knowing it from top to bottom and how to work em, thanks dude.
@cliffcares6455
@cliffcares6455 3 жыл бұрын
Welcome. Ride safe.
@Danimal-D-Animal
@Danimal-D-Animal 2 жыл бұрын
Thanks for your video. I got a new tire put on last year and didn't think to have the final drive oiled. I don't have much money so this helps me avoid bringing it back for service.
@hanselmanryanjames
@hanselmanryanjames Жыл бұрын
Thanks for the tutorial. Just changed my tires on my own for the first time, couldn't have done it without this video. One thing that was different on my 2003 vstar was there is no pocket for the rear brake drum support bolt to set into. They must have changed that on later models.thanks!
@jennasevilla
@jennasevilla 3 жыл бұрын
Thank you for posting this video I was able to do it by myself step-by-step now I got to go put some new tires on. 🏍🏁🏁👍🏽
@Eagle-pe9pg
@Eagle-pe9pg 5 ай бұрын
Awesome video thank you. I have an XVS1100 but looks pretty similar. My old bike was a XVS650.
@bthomson7770
@bthomson7770 2 жыл бұрын
Very nice video. One thing though, the final drive assembly has more splines that are critical to check for dryness. These seem to be the ones that cause failure the most, and the final drive should be taken apart to check for grease.
@jockofthebushveld299
@jockofthebushveld299 Жыл бұрын
Great Video and Camera work & explanation 👍
@Hector-si7oi
@Hector-si7oi 11 ай бұрын
Brother you make this look so easy! Thank you for sharing this video ❤
@bennyblanko3
@bennyblanko3 2 жыл бұрын
Great video! Thanks for all the little details and tips. Just got this bike for my wife, and need to change the back tire. But, nice to see how you do the front too, in case I need to put new pads on later. Thanks!
@tdublove9558
@tdublove9558 3 жыл бұрын
Thank you for taking the time and sharing your knowledge I have to do this soon 😬
@cliffcares6455
@cliffcares6455 3 жыл бұрын
Thanks. Anytime ride safe.
@motohead117
@motohead117 Жыл бұрын
Very well done and to the point 👍👍👍
@Idonotknowthisman
@Idonotknowthisman 10 ай бұрын
Very good video thanks...what llube do u use?
@revelationakagoldeneagle8045
@revelationakagoldeneagle8045 2 жыл бұрын
Great Tutorial... Will save for future reference on my 2008 V-Star Silverado rebuild ✨✨✨ Blessings from Georgia, USA ✌️😎 🪶 🪶 🪶
@bodycount7260
@bodycount7260 Жыл бұрын
Awesome video thanks Cliff :)
@donnabusza4960
@donnabusza4960 4 ай бұрын
What kind o jack is that floor jack?
@ricardovidalrodriguezs5125
@ricardovidalrodriguezs5125 Жыл бұрын
Very nice video.saludos desde sabinas hidalgo México
@derrick.l1870
@derrick.l1870 2 жыл бұрын
For all y'all new riders , y'all will save a few bucks by just changing your own tires. And y'all keep on enjoying the wind therapy and being safe out there.
@goldenfox4816
@goldenfox4816 10 ай бұрын
Does anyone know what size those 4 bolts are that connect the drive to the frame on the rear tire?
@howatmiller4920
@howatmiller4920 2 жыл бұрын
Good shit dude very helpful keep on keep on!!
@gerrylamothe7318
@gerrylamothe7318 2 жыл бұрын
Thanks I’m a brand new rider
@derrick.l1870
@derrick.l1870 2 жыл бұрын
Yeah me too. I've been riding for about 4 months 😁
@abigail_mcleod
@abigail_mcleod 3 жыл бұрын
Hello. Ty for the video. question: what lub do you use for the drive shaft ? And when do you change the drive shaft oil ? Thankies
@cliffcares6455
@cliffcares6455 3 жыл бұрын
Welcome. I don’t lube the drive shaft but do put a little coating of grease on the rear wheel hub splines. As for the final drive oil. I couldn’t help you there. Best bet would be to call a Yamaha dealer and ask. Hope this helps. Ride safe.
@abigail_mcleod
@abigail_mcleod 3 жыл бұрын
@@cliffcares6455 thank you for your explanation Sir. Have a nice day.
@derrick.l1870
@derrick.l1870 2 жыл бұрын
This was exactly what I need to know. It was very helpful. And better than another one that I saw on here. That dude cut out some parts. I needed to see everything done. What kinda grease didja use ?🤔
@lloydsplace2
@lloydsplace2 3 ай бұрын
very informative.
@paulwwwynne
@paulwwwynne 3 жыл бұрын
Good video - very helpful - thanks.
@llebcire
@llebcire 3 жыл бұрын
Thanks! Getting ready to have tires installed and I need to get my wheels ready for carry in/drop off install. Watched a few videos and yours is very detailed. What lube should I apply to the final drive? I have low mileage on a 2008 V Star 650 (2,500 miles) but the tires are old and I’ve read it’s a good idea to lubricant the final drive when I have it apart. Any particular grease?
@cliffcares6455
@cliffcares6455 3 жыл бұрын
I use regular bearing grease. Only need to coat the splines.
@llebcire
@llebcire 3 жыл бұрын
@Kirk M Thank you! I had purchased "Yamaha Yamalube Molybdenum Disulfide Grease - ACC-MOLDM-GS-05" that I used for this.
@soumilinon
@soumilinon Жыл бұрын
@@cliffcares6455 regular bearing grease is no good there and diff. should have been greased, 4 bolts to get at shaft splines
@kenwittlief255
@kenwittlief255 Жыл бұрын
it MUST be 60% moly lube paste any kind of grease will destroy the splines before your next oil change
@Kaitlin5530
@Kaitlin5530 3 жыл бұрын
I’ve got a 2015 650 Custom. Removed the wheels for rubber, got them back and installed them last night and now I’ve lost my speedo/odo/trip and gained an engine light, which I’m assuming are correlated because nothing else was touched by wheels and minor clutch adjustment at the hand control. Took the front wheel apart and cleaned up around that speedo housing and but still nothing. Any tips?
@cliffcares6455
@cliffcares6455 3 жыл бұрын
Do you have a sensor ring on your front wheel?
@SPANNER123
@SPANNER123 2 ай бұрын
Thank you.
@979mexicantamaulipas3
@979mexicantamaulipas3 2 жыл бұрын
Where is this shop at
@zayarhlwan3178
@zayarhlwan3178 Жыл бұрын
thanks ❤❤
@TwoWheelRocco
@TwoWheelRocco 3 жыл бұрын
Great job, Ty
@979mexicantamaulipas3
@979mexicantamaulipas3 2 жыл бұрын
Where’s the shop at
@Christopher_Nair
@Christopher_Nair 3 жыл бұрын
Great video
@cliffcares6455
@cliffcares6455 3 жыл бұрын
Thanks. Ride safe.
@orclord5719
@orclord5719 4 жыл бұрын
Do you rent the motorcycles or do you just record the ones that you change for work?
@cliffcares6455
@cliffcares6455 4 жыл бұрын
Orc Lord These are customers bikes that I change the tires for.
@Lonnie-bb5ok
@Lonnie-bb5ok 4 ай бұрын
What no torque specs ???
@kjjijahangir5637
@kjjijahangir5637 2 жыл бұрын
Ok 🌹 🇧🇭 🇧🇩
Yamaha Star 650 Front Brake Pad Replacement and Caliper Maintenance
10:21
Retro Tech & Electronics
Рет қаралды 12 М.
How to Replace the Rear Tire on a Yamaha V-Star 1100 Classic
17:44
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 56 МЛН
All the V Star 650 owners  PLEASE WATCH THIS 3 min. VIDEO !!!
3:37
Do it yourself Motorcycle repairs
Рет қаралды 69 М.
2007 Yamaha V-star 650 Custom - Tires+Oil change and chrome polishing
37:46
Elin Yakov's Rusty Beauties
Рет қаралды 97 М.
Yamaha Star 650 Valve Adjustment - Checking  and Adjusting PART 1 of 2
16:53
Retro Tech & Electronics
Рет қаралды 54 М.
2014 Kawasaki Z1000 How to remove front and rear wheels. DIY
15:31
Cliff Cares
Рет қаралды 2,6 М.
Yamaha 650 V Star Rear Wheel Removal and Tire Change
24:48
Lightning Motorsports (James Y)
Рет қаралды 13 М.
Yamaha Star 650 Front Brake Flush
9:26
Retro Tech & Electronics
Рет қаралды 7 М.
2020 Road Glide Limited - How to remove both wheels DIY
23:43
Cliff Cares
Рет қаралды 6 М.
Yamaha V-Star 650 Rear Wheel Removal
7:34
jimmymiko
Рет қаралды 156 М.
Changing The Rear Tire On Yamaha V-Star 1100
22:07
Byrds1967
Рет қаралды 97 М.