2010-2022 Toyota 4Runner 3.5-inch Suspension Lift Kit

Get yours today!
www.roughcount...
Superior Design. Rough Country's 3 inch kit offers easy installation and aggressive good looks at an incredible value. Take your 4Runner to new heights with this excellent option for your fifth-generation Toyota 4Runner.
Durable Components. This kit features a set of high-quality, lightweight, forged aluminum Upper Control Arms designed to make alignment adjustments easier and Clevite rubber bushings for enhanced durability. These arms are designed to promote a factory-like geometry by keeping the ball joint at optimum angles after lifting. This design allows for an improved, greater range of motion from the ball joint, with less stress, wear and tear. Rough Country’s 3.5-inch Bolt-On Kit features N3 nitrogen-charged shocks, giving your truck incredible ride-quality both on and off-road. Also included are a set of durable strut spacers and coil spring spacers to provide lift height from front to rear. Once installed, this kit gives your truck plenty of ride height for larger tires while offering a clean, level look from front to rear.
Installation.  Rough Country's bolt-on 3.5in Bolt-On Kit are easy to install, 100% bolt-on, and require no drilling. Plus, they come with all the necessary hardware included. With an estimated install time of 3-4 hours, you can enjoy your new sliders in no time.
Limited Lifetime Warranty. Rough Country's 3.5in Bolt-On Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty, give yourself peace of mind when using Rough Country's products!

[@vc4414]

This would’ve been nice a month ago when I had the regular 3” installer. Damnit RC

[@vinniericotta8937]

@@joshuamcintyre01 Ada

[@vinniericotta8937]

Zz h

[@nathanman6847]

please post the whole video if possible. thanks

[@MatthiasNyberg]

That looks pretty wicked.

[@chrisg1855]

I don’t see it on the site and the link doesn’t work. I see a 3” kit and a 3.5” kit for xreas equipped 4R’s.

[@mn507-outdoors]

Need to do video installation please

[@emilyjaramillo6459]

Is it normal to cut the frame when u are doing a 3-inch body lift?

[@--RSL--]

Gas mileage? No.

[@Djkommode]

What about the kdss system

[@joshbordo]

Where do I get that exact lift kit set up? I can't find it on rough country, thanks

[@marioramos7767]

I put a RC on 3 in lift on a 2wd 4 runner. Is that ok.

[@makariussulit]

3.5” front and back?

[@drewman5740]

Okay it’s been 8 months since this vid was posted; come on RC what’s going on here....?

[@criollocomando]

what model are the wheels?

[@hannaemmons1398]

They look like ridge grapplers

[@anthonygiordano3991]

Does this kit work on the 2wd 4Runners as well?

[@RCGJR_]

What are the rims!? They look nice

[@Lifeisgood311]

They look like a black Rhino knock off

[@billymontoya4893]

How much it cost parts and labor? I have 2022 4runner

[@davidr6865]

Figure labor for installing and removal because RC rides like absolute trash and is garbage quality

[@jameslester4811]

I may be doing the same mine makes loud bang in the rebounds on bumps over 15

[@hauntedhose]

Oh I like that 👀

[@702cooks13]

What exact kit is kit ? Looking for the same

[@zachpeat5076]

What kind of bumper is that?

[@Moklog.4runner]

I wish you have a full video how to install that lift kit, because I don't know how fit the 3.5 spacer in my 4runner with X-reas.

[@dunnoyolo2238]

Pretty sure you would have to Delete X-reas system

[@sammyglo5354]

I'm running 3.5" spacer up front with x-reas on limited, don't recommend because my stock uca's are rubbing the coils and every bump you hit you will hear it even on speed bumps so if your off roading I definitely do not recommend lol. I think anything past about 2.5" spacer you need to upgrade uca's, I ran 2" before with no problems but I don't like the ride quality so I'll be buying a suspension set soon

[@jjwolff2421]

Does this work with the new KDSS system for 2022 4runner? I heard problems when lifting a 4runner with KDSS having a lean. Does using the 3.5 RC suspension lift also require to get a KDSS spacers to correct the lean after lifting?

[@keith1776]

Did you ever find anything out?

[@Dirtbikeracing101]

Also wondering this

[@andrewnahm8188]

Doesn’t work for anything with KDSS. Was about to order a 3 inch setup for my 2019 TRD Off-road Premium but figured out that it is not compatible at all. Going with the Bilstein 6100 set up instead with the OME upper control arms. Much pricier setup but definitely quality 🤙🏼

[@andrewnahm8188]

After talking to them on the phone they gave me a very vague explanation about how their kit fucks with the KDSS electronics and sway bars

[@jameslester4811]

I have this lift it’s ehhh it makes a loud bang on the rebound going over bumps around 15-20 mph and it’s way stiffer than stock or an adjustable damping system… if anyone has a solution for the bang that be appreciated.. or just cheap parts

[@simpatic21]

I have the same problem

[@TheDRob]

Check your front coils for marks. The UCA may be hitting the coil at full droop.

[@briantaylor6030]

​@simpatic21 do you still have to cut the frame to fit 33's? Change gear ratio?

[@BillyKivalu7]

Give us a 6 inch lift kit 🤙

[@user-ot9vo3pm1h]

Procomp has a bullet proof 6” kit… I have it on mine… ❤️

[@down1plus2]

@@user-ot9vo3pm1h how's stability? Do you have heavy roll in turns?

[@user-ot9vo3pm1h]

@@down1plus2 nothing crazy I put some 1.5” spider Trax whee spacers on it and it’s as solid as a rock!

[@BillyKivalu7]

@@user-ot9vo3pm1h yeah i actually ended up doing a procomp 6 inch with bilstein adjustable and spc uca cranked to 8 inches. Added 35s and its looking beast imo.

[@user-ot9vo3pm1h]

@@BillyKivalu7 nice post a video!

[@tac-c2968]

What wheels are those???