2010 Kia Forte Headlight Bulb Replacement & Relay and Fuse Locations

[@PegasusBYU]

Thank you sooo much. As a woman it really sucks to have to pay someone to do this. Saved me money! Thanks again. You rock!

[@tk27a]

Thank you for having taken the time to do BOTH sides and show clearly the mecanism.

[@dkrusee]

Thanks for the rotate counter-clockwise detail when removing the bulb for the low beam on the passenger side. That bulb is tricky to get to so even the smallest detail is super helpful. Then about hearing a click when the new bulb is in place... Much appreciated!

[@PioGunnr]

Truly appreciate vids like this, saved a bit of coin and learned something too. Thank you very much!

[@LehewTech]

Yessir, thanks for watching

[@Greg3468]

Appreciate the vid man. I just did this for my mother in law. 2013 fortè. Her bulb was an H11BC. They gave her just a regular H11B and it didn’t work when I replaced it and tested it. Anyway I removed the headlight housing and it was really easy. I found it easier than removing the battery. The housing was just the 2 bolts and came right out. I was able to replace it with the right bulb and get the housing right back in. Easy peasy.

[@mominx2412]

Your perfect explanation helped me so much, I want to replace the bulbs with led and couldn't figure out the connector type. Thanks a lot.

[@KriztofferSwank]

This video helped me find the solution to my problem. Bulb burnt out and it must have shorted the fuse with it. Found the passenger side low beam fuse thanks to your video. Thanks!

[@thebeardedclam1714]

Great vid. Took less than ten minutes for both lights. Didn’t have to remove the battery which made the job much easier.

[@alanestrada7080]

Thank you so much, man! I got it done in a few minutes and your video was the reason why!

[@susangardner8200]

Thanks.

[@sindrax]

Had a light out. After checking the bulb and fuses, it ended up working from reseating the fuses. Thanks for the vid.

[@erichughes1776]

Thank you so much! This saved me a LOT of time!!!

[@car6on14]

Helpful vid, my bulb failed and blew one fuse, saved me time showing fuse location, thx!!

[@jameshanley3947]

Whats the piece with the wires where the low bulb spins in/out of called? I need a new one but dont know what the part is called

[@JosephAlanMeador]

Hey man thanks so much for the video. I just need to pickup that H11B now, this video makes me more confident that I can do it easily for the passenger bulb that is out. Cheers!

[@adriantanasoiu3815]

Please can you tell which ones are the high beam relays or fuses for a Kia Forte 2015? I would really appreciate! Thanks in advance!

[@tellmestraight]

Thank you for your help! I would have broke the high beam connections getting it out otherwise!! However, The new bulbs got the high beam working but not the low beam. The high beam bulb element was broken but not the low beam. Before all this the original lights got ridiculously cloudy so I bought after market full headlight assembly's. So I assume the relays and fuses should be fine since nothing was wrong before the change. The passenger side is perfect but the drivers side low beam is giving me trouble.

[@chrismanguno3467]

Just changed my drivers side one. If you can curve your hand under the cord that comes from the battery, no need to remove it! Thanks for the help :)

[@brasstacks7181]

I know this is an older video but I have a question. Please help. Awesome video! THANK YOU!!! As a woman it's so helpful to be taught this so I can do myself. One question though... I noticed my DLR's on passenger side is out. I read that is not the same as low beam as my DLR's are always on as soon as I start my engine. Is this a high beam issue? And is a Kia Forte Koup the same as what you're working on?

[@leirbag1595]

Thanks a lot! The manual was no help for dealing with that, so that vodeo was very helpful.

[@paulalmquist5683]

2011 uses a H11B on both sides. See some 2011 specific videos if that is what you have, especially the one showing how to remove lamp assembly instead of battery.

[@ShadowthaOni]

I have a 2019 kia forte and the daytime running lights and headlights have gone out. The bulbs have been replaced but still nothing. I want to check the fuse but not sure which ones are for the low beam headlights. 😢

[@redlion45]

Hey. I can't get that clasp to hook again no matter how hard I try. Is there a better way than just pushing it?

[@chrisb48907]

thanks for the video...took me like 5 minutes...after another video showed taking the lamp casing right out.. cheers !

[@SouthSacIraq14]

Thank you sir just did mines today and for the low beam on the driver side i did it the same way as the passenger side did not need to remove the battery or remove the out side part. The good thing i got skinny hands 😁💯

[@freddyg.martinez389]

Thank U very much for All the Detailed info - I Definitely appreciate it !

[@القلبالحزين-ذ3س]

كيف اطفي مصباح العالي hay light النهاري في فورتي ٢٠١٠

[@voiceofderek]

I like this guy he's very detailed. Thanks man you rock 🎸

[@hussainalakabe8438]

Hello I have one LP lamp not working I try to replaced by new one but still not working I check the supply it's OK Can you tel me where is the problem?

[@alexongpanghai]

Below the high beam bulb ther is a small bulb how to remove that small bulb? Thanks

[@slebzoboyo]

Worked like a charm. Thank you!

[@OscarOrtiz-h8h]

Hello friend, I have a kia optima 2010 and the high lights don't turn on and there is no witness on the board

[@SuperUbuntudude]

what about 2014 kia forte I find it very frustrating that I can't find this info

[@NickGover]

Thanks for the clear, helpful video!

[@MisterStats]

Thanks, perfect. Car was in a different location. After watching video I knew what tools I needed to complete the job on driver's side to replace both bulbs.

[@NightOwl052]

Thanks for your help. Your video was spot on.

[@MrShaheer123456789]

What is the bull for the fog light

[@MrMrNikess]

Would it work the same for a 2017 Kia Forte?

[@ohjonnyohjonny]

If I want LED headlights, I just need to buy H1 and H11B bulbs to replace my stock standard right? Don't need to buy completely new fuses?

[@LehewTech]

No fuses needed, LEDs pull less current than halogen

[@ohjonnyohjonny]

@@LehewTech cheers!

[@Thewhisperingcrow]

Trying to replace my low beam on the passenger side and I’m trying to rotate it counterclockwise and it’s not coming out

[@WilkerAyv]

Same here 🙁

[@Thewhisperingcrow]

@@WilkerAyv use needle nose pliers. So much easier

[@westgurlll]

THANK YOU SO MUCH i just did that myself and i feel good the fact i don’t need help lmfao

[@joelagrinsoni4016]

I own this car. You can take the whole head light assembly out and off and unplug the light harness in the middle to make things easier

[@gdi1093]

My lowbeam light won’t come out when I twist 😭

[@jennifersmith6218]

I've watched every video ever made to find one with a light like mine. And the sob won't just twist out/release from the part holding the lil prongs. Did you ever figure out a way to do it?. It's just a headlight and i want to change it myself. The dealership cost an arm and two legs to do it.

[@gdi1093]

@@jennifersmith6218 Yeah, so I couldn't get it out without removing the entire headlight housing, but I found another video where they show how to do it, it's actually super easy and preferable. You just need a ratchet and to unscrew 2 screws with it and you can pull the whole headlight assembly out. Coincidentally my HIGH beams just blew a couple months ago and it was a breeze to replace because I didnt waste time trying to squeeze my hands into those crevices and removed the whole assembly. Sorry, if I lived near you, I'd totally offer to help haha.

[@jennifersmith6218]

Appreciate that, I'll check out some of those videos...wish me luck HaHa!

[@gdi1093]

@@jennifersmith6218 good luck! I know its kinda sketchy, but if you have trouble, send me your email. I can take a video with my phone showing you how to do it. You will need a ratchet and socket set though, so you might have to go to Walmart or Home Depot and spend $20 if you dont have one laying around.

[@Elite-Agent]

Hey great video. I was just wondering if you know which are the fuses for the Reverse lights (backup lights) and switch. Thanks

[@alexongpanghai]

How to remove parking bulb?

[@isabellekp]

Thank you so much for sharing! 🙂

[@Irishhawk8]

Was figuring if my High Beam was dead when i checked them on idle and figured its not working because it wasn't active. LMAO But my lights are so dim and low and it's frustrating to figure out the issue

[@kenmiller8499]

Very clear concise video. Thanks for the help!

[@j_cheko]

Its not the same fuses on a 2017 Forte... been weeks searching and reading the diagram and nothing :( HEEEEELLLLPPPP!!!

[@chevycruze1406]

I got the high beam bulb can't get the low beam lol

[@lavonbradley4823]

Great information. Thank you Sir.

[@thankubelle]

life saver. thx!!!

[@chrishermiston4996]

Great informative video, thanks!

[@abbyboyone]

Thanks for the video

[@puchox5kwidama758]

Helpful thnx bro you great💪🏿❤

[@ajbowen9366]

Why aren’t you supposed to touch the glass?

[@LehewTech]

Oils from your hand can get on the bulb and cause it to fail prematurely

[@louissilver8205]

Great video, thanks

[@GENX001]

Thank you so much

[@BukiS83]

Thaaaank you!

[@Skew757_entertainment]

Thank you

[@datunitedkingdom4480]

really appreciate it, god bless

[@allahjoseph]

Great vids

[@talon8585]

God Bless you!

[@LORDBYRONII]

Thank you!!!

[@JoseLuisPrado-b4m]

H1 / H11B

[@heavensengdara1216]

Will this work for a 2013 kia forte?

[@jennykathe5789]

Thank you!