how to replace the thermostat on a 2010 Nissan Murano
Пікірлер: 61
@machinegundroner9411 Жыл бұрын
Probably the best, to the point, video I've found on this topic. Thanks.
@byron7918 Жыл бұрын
No problem glad i can help
@steveoneil881418 күн бұрын
Great write-up. I was replacing the thermostat, coolant and hose's. After making sure the bolts of the thermostat could loosen I decided if it ant broke don't fix it. But good to know if I need to change.
@byron791818 күн бұрын
Glad I can help a lot of people in the comments shoot me out because I didn't show every single in-depth step
@me5768 Жыл бұрын
I love the honesty about cussing and swearing 😂
@byron7918 Жыл бұрын
Glad I can help lol
@4xprops457 Жыл бұрын
Just keeping it real sounds like!
@constantinmilitaru6 ай бұрын
Make it as hard as possible Nissan
@byron79186 ай бұрын
Be prepared to get your hands scratched and cut up
@user-rn9hg4wx5t Жыл бұрын
Thanks you my brother
@byron7918 Жыл бұрын
No problem glad I can help
@henrycisneros7767 Жыл бұрын
Good video and on point but never again!! 💀 saving up money next time and taking it to the shop!!!
@byron7918 Жыл бұрын
Thank glad I can help I struggled off camera
@reric883 жыл бұрын
Thanks a lot for this video, dude. Short and to the point. Did you bleed the coolant system afterwards?
@byron79183 жыл бұрын
On video i did not, off video yes i did
@romcallis10 ай бұрын
Why would you need to bleed the system? @@byron7918
@kennygraves58663 ай бұрын
Put some gasket sealer on the gasket and stick it to the housing so you don't have to fight with it too.
@kennygraves58663 ай бұрын
Thanks for video..good job.
@Aesthetics6225 ай бұрын
thanks for the video fam, was gonna ask why not do the watepump as well?
@byron79185 ай бұрын
Waterpump was replaced by the dealer I was told
@byron79185 ай бұрын
She told me the dealer just replaced it
@jessemoore5527 Жыл бұрын
Good job have a hard time though getting that wire off to get to that last boat. How do you disconnect that
@byron7918 Жыл бұрын
That wire was a nightmare that's y it was a jump cut in the video because it took me 5mins. To remove it myself but I used a skinny and small flathead screwdriver to help me
@kensmechanicalaffair Жыл бұрын
You can literally push it with your finger.
@romcallis9 ай бұрын
Does the wire have locking pull tab or does it just pull off?
@romcallis9 ай бұрын
Actually I removed it without disconnecting the wire. I used a 10mm deep socket@@byron7918
@romcallis9 ай бұрын
Check that. I must have removed a water pump bolt. That wire needs to come out
@boxingringking1113 жыл бұрын
How did you get the wire unclipped to get to the bolt behind it? I can't get my hand in a position to be able to squeeze it
@byron79183 жыл бұрын
Pull the tab down and remove it wasnt easy b prepared to cuss
@enthusiestmuch1 Жыл бұрын
@@byron7918 what tab?? I am not seeing a tab..
@byron7918 Жыл бұрын
R u talking about the yellow and black wire
@randysoliz3595 Жыл бұрын
@@byron7918yes I can’t find the tab either
@hereandnow8578 Жыл бұрын
when you put the gasket on did you use any RTV silicone?
@byron7918 Жыл бұрын
it comes with a gasket, and i used rtv gasket maker as well because the gasket that comes with it keeps falling off
@hereandnow8578 Жыл бұрын
@@byron7918 thank you!
@LILREMY4582 жыл бұрын
How did you get the connector off . I have tried but no success
@byron79182 жыл бұрын
Everything on the car is blind i just used my fingernail to get under it and got it out
@lashellhearn6916 Жыл бұрын
Sure wish u were here in Lubbock I need a good guy to fix mine. I just know it’s the thermostat
@byron7918 Жыл бұрын
Not to bad of a job hardest part was taking the connector off
@lashellhearn6916 Жыл бұрын
@@byron7918 I bet. I wish I was brave enough but off to the shop she goes, never one problem with this one. I love my little blessing of a car….. My sister gave it to me, still just so pretty… ty for ur video didn’t miss a lick…
@giorgiweibolt78772 жыл бұрын
What tool did you use to remove the bolts
@byron79182 жыл бұрын
Quarter inch socket ratchet and swivel
@nothingyet6759 Жыл бұрын
Howd yall take the plug off! I tried but that sucked didn't want toncome out
@byron7918 Жыл бұрын
U have to feel for it once u feel the lip on the connector pull up and out also a small screwdriver u can use to help u pry off
@salvadorlopez11862 жыл бұрын
Ce presio tiene
@martiszcarr92266 ай бұрын
How did u get to the bottom bolt
@byron79186 ай бұрын
1/4 ratchet with long 10mm
@ygfromig5 ай бұрын
how in the world did you keep the gasket in place?
@byron79185 ай бұрын
U have to start it with a bolt trust me it's not easy
@ygfromig5 ай бұрын
@@byron7918 thanks bro i finally got it.
@byron79185 ай бұрын
Glad I can help
@ItsWhiskey282 ай бұрын
Or just use a little glue in 2 spots to hold it in place.
@quinerious Жыл бұрын
What size was the 3 bolts
@byron7918 Жыл бұрын
I can't remember but they r either 10mm or 8mm bolts
@romcallis9 ай бұрын
10mm@@byron7918
@lowellgelin20632 жыл бұрын
This video does not show the removal aspect of the thermostat. Isn't that the purpose of the video?
@augustin19992 жыл бұрын
Thank you
@Salty_Knuckles Жыл бұрын
Dude, I want to see the knuckle-busting effort it took you to get that part out. Your video shows the part in, than quickly switches to the part being removed. kzbin.info/www/bejne/aHaogYeYjtN-jdE
@DonaldJunior-bf2st3 ай бұрын
Start from the beginning next time
@blkmedusa9940 Жыл бұрын
How did you take the connector off?
@byron7918 Жыл бұрын
Small flathead screwdriver and 5mins. Of cussing u might have to spray it down with wd-40