2010 Odyssey air modes not working easy diagnosis and fix

Рет қаралды 41,185

Shmuel Bollen

Күн бұрын

Пікірлер: 67

@alexanderklepczarek8726 11 ай бұрын

Thia is so helpful none of the other videos show how to diagnose anything.

@talktodanny 4 ай бұрын

Thank you Shmuel - your instructions were exactly what I needed. I replaced two parts yesterday on driver and passenger sides, ran diagnostics, and everything looks great!

@shmuelbollen5253 4 ай бұрын

I’m so happy to hear this!

@TYMWLTL 7 күн бұрын

What a clear, smart video. I'm on my way to having my heater work again. I'm on my way ti fixing my heater issue. Thank you sir.

@GaryJoanneGoble Ай бұрын

Thanks so much for this video. We had no idea we could run the diagnostic. It showed 4 segments with issues. We replaced the relay, and used another video to remove and service both the driver and passenger door blend actuators, and now all is well. Thank you for setting us on the path of a successful DIY fix!

@shmuelbollen5253 Ай бұрын

@@GaryJoanneGoble Glad to hear this! Happy motoring!

@jim4690 22 күн бұрын

Where did you find the codes sir?

@GaryJoanneGoble 22 күн бұрын

Used this video 's chart. Really, we had an idea that both door blend actuators were faulty, so took both the driver and passenger sides out, took them apart and cleaned them, and also replaced the related relay in the fusebox. We originally had 4 segments indicating malfunctions with the diagnostic. After this fix, one segment remains, but it relates to the rear seating door blend actuator so we didn't fix it since we rarely have passengers in the rear.

@OBXR41 8 ай бұрын

Thank you so much Mr. Bollen. This was incredibly helpful. Had an appointment scheduled at the dealership to have them tell me what was wrong with the rear AC unit not blowing. They wanted $190 to do a "diagnostic." I told them to pound sand when they said it would take them 2 hours. I should've known there was a button press for diagnostics. This 100% worked. I found my issue within 5 minutes & replaced the faulty fuse. Air blows & issue fixed. Thank God you put this out there to help us save $ when dealerships are just out there to F as many people as they can.

@shmuelbollen5253 8 ай бұрын

Glad it helped.

@mikelinning3665 7 ай бұрын

What fuse was replaced if I may ask?

@greentray1231 Жыл бұрын

Thank you, your video helped me fix my issue which was my defrost for the front windshield was stuck on that mode. Now that I replaced the motor in the video im able to alternate through all the modes and positions.

@shmuelbollen5253 Жыл бұрын

Great to hear! Happy travels.

@jebsimpson1921 Жыл бұрын

Just followed these steps for my 2008 w/ 208K miles and this worked. Paid ~$150 for the OEM part from the dealer.

@scowell Жыл бұрын

Using this, found that my mode motors front and rear were bad... ordered parts from Amazon,

@jimdavy5751 2 жыл бұрын

Great video. Had similar problem. It took two reassembly attempts to make it work porperly. Make a special note that when putting the actuator back in to engage TWO damper levers. One is hard to see. It controls the floor outlets

@tzegras Жыл бұрын

Thanks. I have the same problem but where exactly is the actuator located?

@jimdavy5751 Жыл бұрын

@@tzegras You have to release the stopson the glove box door. It willthen tilt down to the floor. Look hard left andyou will see the actuator

@curtiscollins2174 Жыл бұрын

Awesome video. Great job explaining as having problems with my 2008 odyssey van heater now. Thank you.

@shmuelbollen5253 Жыл бұрын

Great to hear!

@scottgibbs7235 Жыл бұрын

Thank you so much. Great video!

@joeromang703 Жыл бұрын

Thanks for making this video!!

@shmuelbollen5253 Жыл бұрын

Glad it was helpful!

@skip7145 Жыл бұрын

So it seems that the previous owner enjoyed warm air while the passenger enjoyed colder. When I selected the AC, driver side was 78⁰ and passenger was on Low. Simply adjusted driver side to Low and all was right with the world!

@greenscreen1060 Жыл бұрын

Thank you for this

@tomprice4016 26 күн бұрын

New follower. Thanks for the.video.

@richwilson7017 5 ай бұрын

Thanks bro

@theRombus 3 ай бұрын

Thanks Shmuel! Where did you get a list of the code meanings?

@shmuelbollen5253 3 ай бұрын

@@theRombus I found it on odyclub but it must be readily available elsewhere.

@markgilden9044 3 ай бұрын

@@shmuelbollen5253 odyclub was my first place to check but couldn't find it. I freeze framed and got the info I needed, but man I wish this stuff was easier to find! It seems some of the service technical stuff is difficult to track down these days, a lot of links are broken / missing images etc now. For example, looking up a wiring diagram to modify the RES on my EX-L was a lot harder than expected compared to other cars I've tinkered with, but I really appreciate you sharing this bit about the HVAC and making it easier!

@loul856 5 ай бұрын

What side you replace? I have same code and same issue and i believe there is 3 blend motors driver passenger and rear around lift gate

@Ahmad_Alhasanat Жыл бұрын

I have 2012, driver side is not cold enough but passenger is cold. I checked the actuater looks works fine. I removed the actuater and moved the gate by hand up and down but still no air colder than 73{driver side} hot air works fine. Do you know how to fix this issue? By the way, after driving 20 minutes all vents front rear left right give cold air! Is there's a way to reset the AC Al these issues showed up after replaced the battery!

@Ahmad_Alhasanat Жыл бұрын

Finally I found low freon! Problem solved.

@20secondsofyou94 Ай бұрын

H’ ,where to look this code

@barrywortz Жыл бұрын

How do you know which of the actuators is bad? The guide just says one is bad, but there are a few different ones. Thanks

@jimmybokinskie-reellifevid9623 10 ай бұрын

Do the diagnostics and replacement of the actuator apply to a 2011 odyssey? My dash looks a little different. Thank you. Great video.

@shmuelbollen5253 10 ай бұрын

Check this Odyclub post, it has instructions for running diagnostics on a 2011. www.odyclub.com/threads/hvac-front-mode-control-issues.368398/post-2484465

@jimmybokinskie-reellifevid9623 9 ай бұрын

I only had air coming out of the dash vents, despite the mode button appearing to work. I followed your diagnostic instructions and got the same error code as you (A), so I also replaced the front mode actuator. Now it's stuck on the defrost vents and shows code C when I run diagnostics. Any thoughts would be greatly appreciated 😊 Thank you!

@diegocipo5778 Жыл бұрын

Which side (driver or passenger) is the actuator located? Thanks for the video, very helpful.

@shmuelbollen5253 Жыл бұрын

Passenger, right behind the lower glove box.

@bmlouey Жыл бұрын

How do you get to that unit? From inside the vehicle? Do I have to take the dash apart?

@shmuelbollen5253 Жыл бұрын

It’s right behind the lower glove compartment. Lots of videos out there for that.

@hectorgarcia7164 10 ай бұрын

Hi! The only problem that i see is that you dont say if the part is located on the passenger side or driver side. Looks like you removed the glove box? Thanks

@shmuelbollen5253 3 ай бұрын

Correct, it’s behind the glove box. In my model, the EX, there’s only one front door actuator.

@rms1348 Жыл бұрын

Swapped out what part? Actuator?

@shmuelbollen5253 Жыл бұрын

Yes, I swapped out the front mode control actuator. There is also a rear mode control actuator, but I didn’t get an error code for that.

@rms1348 Жыл бұрын

@@shmuelbollen5253 awesome, thanks

@saltydecimator Жыл бұрын

So what happens when the self test Doesn’t work?! When I had the drivers side blend door off it gave me”open in drivers …” then after I cleaned the drivers blend Door internally od the grease, it starts the self test than stops, with rear defrost on..

@tzegras Жыл бұрын

Thanks. I have the same problem but where exactly is the actuator located?

@fiddlerpin Жыл бұрын

On drivers side . Look up towards center for a green connector.

@saltydecimator Жыл бұрын

Ya there’s like 4 of them

@slitherninja781 Жыл бұрын

kzbin.info/www/bejne/mnaalX9ontd1ibM this video will show you the location. Mine is bad too so now I just need to figure out the part number to replace it. It works for a few times if I tap on the actuator so I bet it has a stripped gear or something.

@saltydecimator Жыл бұрын

@@slitherninja781 vid i saw said To remove the dielectric grease From The contacts internally. Open up the motor. Clean. Reassemble. Careful with the clips