2010 Vauxhall Meriva 1.4L Petrol clutch Replacement

[@ntokamak693]

Kevin your videos are really well filmed, only people who work on cars can understand how hard these jobs are. I watch all your videos thankyou RESPECT!

[@WMCS]

BARRY MAX thanks for the feedback. My go pro camera is down. Waiting on it’s repair. More vids to come soon.

[@dariuszkrzemieniecki8315]

Ok

[@Juzek534]

Clutch replacement in the rain - Respect

[@WMCS]

Juzek534 thank you for the feedback. I get through the snow up to -5🤪🥶

[@jugajugic6486]

Profi amater respekt

[@forddoctorforddoctor5918]

Absolute respect!! I’m doing one this Saturday 👌👌🤞🏻🤞🏻👍

[@moontheloon1969]

Started my apprentiship mid 80s,used to do V8 Rover clutches for extra cash, in work did all the engine jobs,never could make bonus,whilst the " clutch " guys were, total respect on your back everyday...

[@WMCS]

Thanks for taking time to leave a comment. Means a lot coming from a fellow mechanic.

[@Rob-eg8qc]

I used to own a 1984 Rover V8 Vitesse many years ago, God knows where it is now, keep the great content up on your channel 👍

[@traconitide]

Much rain this day! Respect!!!

[@tonybalm1513]

It's really clever and time saving the way how you drop the gearbox onto the sub frame. This leaves just enough room to change the clutch. I have seen videos on here of people removing the sub frame, steering rack and exhaust. This looks the same as my Corsa C 1.2 petrol.

[@WMCS]

That’s it. Same thing for the corsa. No need to drop subframe. Lots of room

[@EZ-D-FIANT]

Yea I didnt think I had to drop the subframe looking at it, much appreciated bro, that rain looked pleasant lol, stay safe and keep having fun bud....👍👌👍

[@bazw1685]

Great vid, very straightforward and makes me feel a bit easier about tomorrow's clutch job, I felt your pain for the wet weather though 🙈 can't imagine how much you wished you pulled it forward just a few more feet

[@michasz5923]

Świetna robota i ciężka wiem bo sam jestem mechanikiem ale jak patrzę na warunki ten deszcz to cieszę się że pracuję tu gdzie pracuję. Twardy jesteś przyznaję.... powodzenia.

[@flex0165]

A ja narzekam, że kanał za krótki mam.

[@gimmeram]

Great job, i will do it to replace the collar of my Meriva following your steps thanks!!, Greetings from Venezuela

[@WMCS]

Dannylo589 thanks for stopping by. Much respect to you.

[@brendanbradyfan3589]

That wobbly flexible extension for your impact gun sure comes in handy great video as always sir

[@WMCS]

Brendan Brady fan I wouldn’t leave home without it... makes everything accessible from the most awkward angle.

[@omarsharif123]

Your a brave man and brilliant mechanic 🤗 I wish you was my neighbour 😇

[@WMCS]

Omar Sharif thank you Omar. 💫🍺

[@GadgetRebel]

Excellent work and the rain trooper

[@dariuszkrzemieniecki8315]

Mechanic Mega kozak👍💯🇵🇱ok

[@carlospiezzi4030]

Good work Kevin, thank you and congratulations.

[@WMCS]

Thank you.

[@angelgenissans8197]

perfect job congratulation my friend!!!

[@12e2aela7]

Awesome I need to replace the clutch my car as well. It is a Meriva A 1.6l from 2006

[@felixwilde2551]

Hello, really a very good job. How did you center the clutch disc and the clutch automatic? Normally the centering tools are too long in your situation and you didn't show in the video how you did it. Would be very interesting. Best regards

[@WMCS]

Hiya. If you browse through the channel on other videos I show how to mount the clutch with the tool.

[@felixwilde2551]

@@WMCSHello, how you use the tool I have already seen a few times. I was just wondering explicitly in the video (point 14:31) whether you had enough space to screw the tool with the clutch and remove it again, because it looks to me as if there is little space between the gearbox and the engine. Many greetings

[@tonypond8196]

your some mechanic . enjoying your vids thanks .

[@WMCS]

tony pond thanks for the feedback

[@NathanealGovender]

Amazing video! keep up the good work. Clever idea using a regular spanner for the gearbox mounting E18 torx bolt @4:13, impossible to get a socket in that space

[@WMCS]

Great that you noticed that 😁✨

[@NathanealGovender]

@@WMCS LOL, I have a corsa C in South Africa that has a z16se 8v engine. I needed to remove that mount as well when I was doing a transmission oil change.

[@borjavalcarcel3939]

Hola,muy buenos videos de mecánica. Permíteme una consulta. Monte un embrague en un Opel Astra h 1.4 del 2006 idéntico al de vídeo que realizó. El caso es que seguí pasado a paso el desmontaje y montaje y a la hora de purgar el embrague bote dos cosas que no se resolver. Una es que no se puede purgar el cojinete de empuje y otra es que al poner en marcha el vehículo entran todas la marchas como si estuviese embragado y las ruedas no forman. ¿Podría darme una idea de que podría ser? Gracias.

[@WMCS]

It sounds like the clutch plate may be facing back to front.

[@borjavalcarcel3939]

Gracias, lo saque para revisar pero esta el disco bien, "tal como indica la inscriccion del disco, direccion hacia la caja" no obstante lo notifique al vendedor y este se puso en contacto con la marca (SACHS) y estos le indicaron que aun siendo la referencia apropiada esto solia pasar en algunas cajas de cabios, osea que me debolvieron el dinero de la factura y me indicaron que deveria comprar el original de la opel. Me parecio estraña la respuesta de (SACHS), pero por el alto coste que me ofrecia la opel octe por una alternativa que me ofrecio la misma marca, (un embrague LUK - REFERENCIA: SCH620309000. Asi que me ariesgue y lo monte.Esta vez si a funcionado.disculpa que me alla alargado pero quise compartir experiencia y ver que opina al respecto. Gracias por los videos tan interesante y la respuesta a mi consulta.

[@georg_der_falsche3560]

Great video! Is it the same work with a 1.6 Z16XEP engine?

[@philneale7290]

I had a 1.4 mervia it couldn't pull a granny off a piss pot .....cracking vid thou 👍

[@WMCS]

Phil Neale Funny. Lol.

[@maciejzawadzki3076]

Mate, big respect ! Can't believe this is so quicker and easier than suspension frame dismantle method. Your method seems a cushy job, especially since I'll also be doing it on the ground. It is possible in 1.6 petrol meriva (Z16XE) ? Ta 🤟

[@KevinVidal-vy3qf]

Great job

[@grinnintosh]

Super Man 💪

[@WMCS]

🍻🍻🍻

[@richardzwiers9845]

Respect

[@matimati469]

Hello, is it possible to replace the clutch in Astra H Z16XEP without removing the sled?

[@rudeboi220turbo]

Did you have to drain the gearbox oil on this one

[@lenkebjarne]

En förstklassig mekaniker i aktion

[@rafikidziki8029]

You are clutch Master

[@WMCS]

Rafiki Dziki thanks a lot for your review. Much appreciated

[@selfaware126]

Did you have trouble bleeding the clutch? Is reverse bleeding the best method?

[@rustlab]

what do you mean by reverse bleeding? Thanks!

[@manicminer3273]

Hi I have an 05 plate combo van I drove home for 4 miles in third gear stopping about 5 times, a smell burning when I got home , it was the gear selector come loose . My van still drives ok but I was wondering what repairs I would need to do.

[@josephine2639]

Manicminer the burning smell was probably the clutch

[@shimzam1574]

hello William, My opel Meriva 1.6 petrol gearbox has a sound in it and it mostly sounds like a lose ring, any idea what could be the problem?

[@vaidotassakalauskas3681]

What was mileage? What is factory expected clutch life on this car and motor combination?

[@WMCS]

Nowadays about 50-60k miles.

[@kamar317]

Très bon travail comme d habitude ,mais tu fais que des embrayages?

[@tsonyumateev8573]

You are great!

[@WMCS]

✨🍻🍻

[@tsonyumateev8573]

How you bleed the clutch?

[@Omegaman1969]

For us mere mortals this job would be a nightmare, this dude smashes it out in his lunchbreak hahahah.

[@danarmeanca9648]

Respect bro

[@sivathasanmathyvannan8003]

Good jop keep continue 👍🇩🇪

[@antoniojesusgonzalezportil6196]

Tengo pensado cambiar el embrague a mi corsa c 1.2 cuando se rompa y esté motor es casi un clon , así que me vale como referencia...

[@eugenialesanu149]

So does combo 14xep 2006

[@talat03]

Güzel video

[@WMCS]

talatos03 merci bien.

[@АндрейКлюшников-щ6д]

Nice job, how much this work?

[@WMCS]

Андрей Клюшников With Oil. Fluid. LUK parts and labour. £340.

[@АндрейКлюшников-щ6д]

Kevin Williams how much only work?

[@olegolegov726]

@@АндрейКлюшников-щ6д ну скорее работа 200 остальное запчасти

[@АндрейКлюшников-щ6д]

oleg olegov 20 тысяч в рублях только работа! и это в не сервиса

[@olegolegov726]

@@АндрейКлюшников-щ6д работа на выезде всегда по дороже !

[@SinanOzdemirqw]

yeah it is possible without a full equiped garage

[@gebholddolten3247]

Great Mechaniker, but bad wether in GB

[@vaidotassakalauskas3681]

I bet all feminists want this job :D

[@WMCS]

I heard they’re also lining up to be roofers in the peak of summer .. i personally feel I might not have a job if they carry on like that ..

[@oscarsalas3220]

Es mudo el señor que no explica nada