2011-2017 Mustang GT McLeod RST Twin Disc 800HP Organic Clutch Kit Review & Install

[@americanmuscle]

Shop this McLeod Clutch Kit! : muscle.am/3GFzyFt

[@brave0nej]

Helped with lockouts

[@macker0077]

Not sure you have to remove the rear half of the exhaust to get at the differential bolts to drop the drive shaft. Also, remember to disconnect the line that runs from the brake master cylinder to the slave cylinder connection on the transmission. This was not mentioned in the video. Finally, ensure you know the torque specs for each of the bolts you are removing. Loctite may be required on the flywheel bolts as well. I can't see this being a 4 hr. job for the avg. DIY. Definitely count on a full day or weekend to complete. Can't imagine doing this job with only floor jacks.

[@Bertinator-nm9ld]

I wonder how well this particular clutch held up? If you freeze frame the video, at 28:48, I'm pretty sure you can see that they forgot to put the block plate back in, before installing the new flywheel.... That gaping hole in the front of your transmission can't be great for keeping dust and debris out of the clutch!

[@ansonantony5699]

Hi.. Looking for input on upgrading the clutch and flywheel for my 2014 3.7L. I am despise my dual-mass flywheel (which vibrates considerably at 2000 RPM), so I'm going with a solid flywheel. I'm leaning towards steel as I don't really race it often (maybe some autocross occasionally) and I feel like an aluminum flywheel might be a little too light for street use. Any thoughts from folks that have made the change?

[@JOERANSTRAIGHT]

I plan on building my car to around 600+ horsepower and I am adding parts as I go I just want to know this is a good option to go ahead and get and install now? I only drive about 3000 miles a year I have two other vehicles which I use as daily drivers and going shopping with the wife and kids. The 2015 GT is just for me and my two boys to go out and have fun.

[@Twobarpsi]

Great video!!

[@shaunfuqua]

Do I need anything else to install this into my 2014 gt 5.0?

[@lstnlne7399]

had a X clutch it crapped out after 2k miles switched to the RST 2019 GT aluminator 5.0l calimer mt-82d mgw dds boobma tran brace steeda diff brace pedders coil overs w externialcannisters fhp strut front and bmr rear brace everyhting stamp changed out to steeda or bmr suspension dw-400 fuel pump roush cold induction mangaflow 3" comp. exhust bmr engine mounts and vmp tune 1 badd pony ty America Muscle for great aftermarket parts

[@writeupking]

Why he touque that pressure plate in a circle 😂😂😂, no way is that the tightening sequence lol

[@Zi.Zenior]

How long did it last in that 10 second car?

[@eastbengal302]

My qustion is my car has 305hp So if I buy McLeod RST Twin Disc 800HP ( So the car power will be increase to 800HP ?? Please i want to know about it thanks )

[@knello15]

Switching to this clutch does not increase your horsepower to 800hp. It is rated at 800hp, meaning it can handle up to 800hp

[@andre5.0h26]

Wow

[@knello15]

@@andre5.0h26 👀 what?

[@andre5.0h26]

@@knello15 at the question bro 🤣 I just can’t comprehend why someone would think that🤣

[@knello15]

@@andre5.0h26 🤷🏽‍♂️🤫😂