2011 - 2022 Ford F150 - Cleanest Oil Filter Removal / Best Tool For It - Reset Oil / Oil Prime Mode

[@BeardedFordTech]

Dude this is probably the best thing since sliced bread.

[@zacharygoeden1282]

Prefer sliced tortillas

[@jeffro221]

I wonder how much JM3 compensates him.

[@Crunchifyable2]

That's brilliant. I love how it's not tearing the crap out of the filter.

[@FordBossMe]

Absolutely

[@jefweb5043]

Timing couldn't be more perfect! Almost like when you see a creepy ad pop up on your internet searches when you simply talk about a product! Starting last Thursday, I've been fighting the hydraulic filter on my Bobcat 863! It's about the size of good old FL-1A's. Some jack leg cranked the heck out of it, and I'm at my wit's end in getting it off!! Thanks for the link...this might be the answer!!!

[@joetoth397]

You my friend, are a damn good mechanic. Keep it up. God Bless.

[@charliemashni8526]

As the guy that owns the truck he’s working on you are very very right.

[@FordBossMe]

Thanks Brother

[@back2basics668]

The price this guy wants for this ridiculous wrench is insane!!!!

[@jim76356]

Would be nice if you weren’t 8 hr drive away and a international boarder crossing I would like to have you service our vehicles. Good video as always Rich.

[@Der8cho]

Great video! Definitely going to add this to my tool box.

[@santinocappellaro7468]

Looks like a lot of thought and engineering went into this really is a great tool for removing oil filters and installing new oil filters excellent job on the demonstration thank you for this video 😎

[@mlieser1230]

I am really intrigued by this filter wrench. It would be just what I need for all 3 of the vehicles I service. The strap wrench with the flex handle is awkward on all 3.

[@michaelmcsperitt1111]

Thanks for info on these filter tool going to have to order some

[@robburns8196]

Any suggestions on which kit would fit caterpillar filters?

[@back2basics668]

Where is the link for this funnel ?

[@bricegraham8256]

So badass. Thanks for sharing man!

[@tankankhamen9522]

seems like there are cheaper, better, more universal designs.

[@FordBossMe]

Not that will do this

[@tankankhamen9522]

@@FordBossMe they may not work like that one but they will fit in the same space as that one. like the socket strap one or the gearwrench, gedore... and sealy makes a nice one.

[@FordBossMe]

@@tankankhamen9522 no that's where you are wrong Don't talk about the tool until you've used it Bottom line, give it a chance or just don't say anything that's the right thing to do It's what any RESPECTABLE person would do

[@tankankhamen9522]

@@FordBossMe for the record i didnt talk about the tool, i talked about other tools and you are WAY too defensive for a mechanic that just got a new tool... do you own stock in the company, you related or best buddies? because there is more to this story if you are responding like that. you are free to use the tools you want, i will use the ones i like. i am not gonna get upset if you dont want to use the others.

[@fubar12345]

Genius, wish I had this when I was changing my old land rover filter. I used the sealey one with 3 hook things that grab the sides, I just managed to get the thing off in one piece, but it was basically crushed by the hooks - one had punctured the filter completely. Could have easily torn in two.

[@JoeKova01]

This will help a lot with the metal skid plates like the raptors have. Nice to have in that small space. I need a set.

[@marktiitto7616]

Ford Boss Me . What do y'all think about that plastic half turn drain plug that hits the sway bar . Started working at new Independent shop . never done Hell of oil changes at my old shop . That some dumb shit there

[@FordBossMe]

We don't like it but what can you do? We just deal with it

[@aberobinson1]

I still remember when FL1A was about the only Ford filter I needed

[@claudeyarborough7532]

So I have been chatting with a rep at jm3 and he was wanting to know if it is the 14 point or 30 point. Unfortunately I am overseas at work so I can’t get under my truck. Typically how many notches are on the fl-500s filters so I know which one to order from them? Thank you.

[@FordBossMe]

Most of these are the 14 flute ones and the guy that you're talking to is my friend his name is Michael we became friends after I made all these videos

[@coastchillin]

I bought these because of you

[@FordBossMe]

I hope you like them

[@blksheepdogtonyg.6453]

That's pretty cool 👀

[@scatpack1381]

I think Ford's could benefit from oil filter relocation kit.

[@jtjones4727]

These look pretty awesome, I noticed they have their own website you can visit also. Man I had a stuck filter, on my personal car no less, a little while back. It's an older Honda Accord with the oil filter on the firewall side of the block. So already an inconvenient spot. After struggling for a few minutes, I did the old trick of driving a screwdriver through the filter at an offset, and that still wouldn't break it free. I ended up cutting the bottom half of the thing off trying to get it with the screwdriver like that. What a mess. I had put the filter on while I had the engine out of the car, and I guess I used too much caveman strength. But one of these, could have saved me a lot of time and effort.

[@FordBossMe]

It's posted in the pin comment I posted on every video that I talked about them at the top of the comment section there's always a pin comment that's where the important stuff goes on

[@FordBossMe]

Yes one of these would save you in a situation like that

[@FordBossMe]

No it's not going to work every single time but most of the time it's going to where other things don't

[@bigtsperspective5831]

This review is Tight Yo !! 😎

[@butterytoast4836]

Switched out the Pennzoil Platinum for the Amsoil SS. Engine still running pretty quiet but it sounds like the engine is slightly noisier than when it had Pennzoil. Maybe it’s just my ears messing with me but I’m gonna keep checking as I did take a recording of it before I switched out the old oil. My transfer case fluid looked good as well. Still had its red color. I think next oil change I’m gonna try Royal Purple HPS. They got it for $62 on Amazon for 6 quarts.

[@2491kridge]

Looks nice in those tight areas. Random question while I’m thinking about it since I had to do one today. E150’s with vacuum operated mode door control. When they fail, either the vacuum canister or check valve fails, it calls for like almost 6 hours to replace, at our shop what we’ve done for years is get a new vacuum canister and check valve and we just bypass the original parts and reroute everything inside the cab in the passenger footwell, charge the customer 1 hour labor for the repair and it’s good as new. How do you guys go about those repairs on that van at the dealer, do you pull the heater box and fix it to OE standards or do you guys do something similar? Just curious really

[@cgonedfishing]

Hot dam! These are smokin!

[@DavidMartinez-eq9pl]

Where can I find those jm3 oil filter tool

[@FordBossMe]

Jm3oilfilterwrench.com

[@FORDTECH313]

Nice

[@billyray4716]

I work at valvoline, guess what we're ordering today lol

[@dsmanpr1]

What size is the jm3 your using for a 3.5 ecoboost f150

[@FordBossMe]

Its the med15/30 flutes

[@FordBossMe]

Contact the company and tell them.your filter they will tell you what you need

[@iliketowncars]

Mm this will be great for my panthers

[@turkeyssr]

Great video! Did I miss your conclusions about oil? Recently, I heard you talking about Mobil 1 and I'm wondering what you prefer now and how cost influences your choice(s).

[@FordBossMe]

this confuses me because you've been on this channel for like literally freaking ever and I have talked about this so many times over the last couple years mobil doesn't even come close to any kind of even mediocre mid grade testing I'm surprised that you're just now asking this question after all this time

[@FordBossMe]

Pennzoil Ultra Platinum is literally the best regular full synthetic that's most affordable to People Like Us

[@FordBossMe]

Red line is the best oil I've ever used

[@turkeyssr]

@@FordBossMe Got it! That's what I thought, but maybe I had earmuffs on about Mobil 1 previously, and then I heard you mention it recently and was surprised. As always, THANK YOU! You have certainly helped us all out. Keep it up!

[@zaineridling]

@@FordBossMe New to the channel, so this is what I wanted to hear. 👍

[@bobimbordino3024]

Great video. That jm3 looks very useful for you. Bless you brother

[@richdelgatto2522]

Rich, just changed my 2011 Mustang 5.0 oil. When the seal broke on the (Napa Platinum)filter. There was pressure and sprayed some oil. I've been doing my own changes since I started driving. This is the first time I had a filter holding pressure. Have you seen this before?

[@FordBossMe]

They could be crankcase pressure built up you could have a stopped up PCV valve

[@richdelgatto2522]

@@FordBossMe Don't laugh, but this car only has 3,880mi. I have 3 cars. I still change the oil every 500mi, which sometimes is over a year. The filter is above some wiring and gets covered. However, the oil sprayed out to the side and made a small mess. I like the synthetic media, in the Napa filter. The Motorcraft is paper.

[@bigjimar77]

Which size is that one?

[@FordBossMe]

One fl500 has 15 spots and one has 30 spots for the wrench to grab

[@FordBossMe]

Contact jm3 oil filter wrench and he will hook you up with the right one

[@ocalaeyeguy]

Have you ever seen a oil filter relocation kit for this model F150 such that the oil filter mounts vertically

[@FordBossMe]

No but I'm sure they have them

[@LOT9T]

A bit of topic. I've been watching a lot of triton 5.4 3v knocking noises which are being identified as phaser/rocker malfunction videos. In relation to cold start up knocking i am curious if the 5.4 triton 2v (1999) has the same issue. I start my vehicle and it knocks during the first few minutes. I'd appreciate any insight you have on the triton 5.4 2vstart up knocking noise if helpful it has 202k original miles on it! Tricks of the trade a novice like myself can learn from the ones with the experience! TY!

[@FordBossMe]

My 4.6 2v does the same - I'll cover this more after the little ones football game

[@LOT9T]

@@FordBossMe Wow excellent TY!

[@wesmullennix3495]

He boss... my f150 2017 is going in for cam phasers soon, is there anything I should have them replace why there in there as well? Water pump etc? I'd rather do it now instead if later ...truck has 50k on it thankyou!

[@FordBossMe]

Do the water pump and updated thermostat and the chain

[@wesmullennix3495]

@@FordBossMe thankyou sir appreciate your input

[@darringusko8539]

You must be familiar with the 2019+ Rangers . It's a tight fit for the 910S will this work on my Ranger? The Ranger filter is a real pain to break free..My Ecosport with the same filter is a breeze do you recommend for the Ranger I have tried several filter wrenches none seem to work well.

[@FordBossMe]

Yes

[@FordBossMe]

I showed that in a Bronco through the wheel well in a previous video

[@IsentIT]

How well does this work for the EB Expedition's and Navigator's? From my experience the filter's limited access turns a simple job into a frustrating one. This might be a topic to cover unless I missed it in your library.

[@FordBossMe]

The are literally in the same exact spot setup the same exact way

[@IsentIT]

@@FordBossMe Do the F-150's have the same rubber flap to open? Those seem to have more room. Family member has a 17 Nav. Getting to that filter from the bottom corner is no fun.

[@tacticalofficer6103]

Hi Rich I may have missed this information in one of your other videos what year or years of Ford vehicles can the flood mode procedure be used on ? Can this procedure be used on all Ford gas vehicles ? Thanks

[@FordBossMe]

Flood mode has been around since carbureted engines Ford Chrysler and GM have continually used this type of mode for these types of things and most of these vehicles still to this day do it especially Ford all of them since carbureted engines

[@FordBossMe]

The purpose for flood mold was whenever you flooded the intake manifold with raw fuel Vapors you would push the throttle down it would open the carburetor wire up stop the fuel from being pumped into the intake and you would draw fresh air in to clear out any of that or all fuel they continued that on with fuel injection as well under the same principle so any Ford this works out as well as multiple other vehicles with other manufacturers

[@tt6518]

Hello, I use it on my 2014 RAM and 2010 Suzuki SX4 , using this during cold start in the morning too while oil is thicker. Works great, big thanks to Rich for sharing with us. Good weekend Tigo

[@standhd]

I have a 2003 F150. I had never heard of flood mode until I started following this channel. Works great for me; I’ve done it twice. Once to see if my truck actually does it, and on a recent oil change to prime the filter.

[@tacticalofficer6103]

Thank for explanation and information

[@davidcampbell1899]

Just wondering, would flood mode work on a fuel injected motorcycle? (Honda CB500X) i already do it on my car!

[@FordBossMe]

Prob not

[@davidcampbell1899]

@@FordBossMe Thank you!

[@tt6518]

@@davidcampbell1899 hello, Just to help, could try to unplug the crank sensor if accessible to prime,just check on for not getting any codes after, Honda ' s tech could answer you . Good weekend Tigo

[@frankkeel8410]

I find a pipe wrench works best! To remove oil filter

[@FordBossMe]

You aint getting a pipe wrench where this will go

[@iridiumman5229]

(1) Pro move cleaning pan dirt and oil out, most excellent. (2) Rookie move taking that nasty rag to the engine base.

[@FordBossMe]

Lol you are funny, if I seen a problem with it I wouldn't have done it It's easier for arm chair people to criticize

[@eddieryan63]

Are you suppose to do flood mode on a regular 3.5 v6?

[@FordBossMe]

You can

[@coastchillin]

what if you don't do the oil prime mode?

[@FordBossMe]

Nothing really

[@tt6518]

Hello, Somebody could tell me what the cross mark and the upper hole is meaning on the oil dipstick please. Tigo

[@FordBossMe]

Upper hole is quart over mark to, cross hatch is the full mark.

[@tt6518]

@@FordBossMe ok Rich, got it right now, have a good weekend and take time for you and your family. Tigo

[@mngolfingbrandon]

What brand is the funnel?

[@FordBossMe]

I don't remember it's been sold out for over a year

[@kendavis1198]

QUESTION for ya Rich..... F L O O D M O D E??? Sounds like it's Just that, However I'am certain that we "ARE NOT" FLOODING the Vehicle with the Fresh Oil and all by Pouring Raw Gas Into the Cylinder's? Could you "Briefly" Explain the Mode's Operation as far as NOT Dumping Fuel for us that might be Interested please??

[@bobimbordino3024]

When in flood mode, the injectors are turned off. No fuel is being pumped into the cylinders.

[@FordBossMe]

I did explain it It disables injectors and turns the engine over this priming the oil system It's a mode to clear the intake of raw fuel in case of an iverfuleing event BUT in turn it can be used to prime the oil system

[@kendavis1198]

@@FordBossMe Sorry. My BAD. I must have Missed that one. Thanks for the Double Whammy Explanation. Appreciate It.

[@jeffclark5024]

As someone who’s done thousands of oil changes I’m kinda set in my ways. I don’t see this fitting in many spots. Also my ocd was triggered when you went from that dirty oil deflector straight to the oil filter surface without even flipping the rag.

[@FordBossMe]

You are wrong bud Don't judge ANYTHING until you try it point blank

[@FordBossMe]

I don't get you guys with this attitude it just gets under my skin so bad

[@KendrasEdge757]

I mean it’s a novel idea, but, and I’m no engineer, it seems like there’s already oil filter wrenches that have SIGNIFICANTLY MORE torque to remove the filter than this one does. Maybe I’ve missed something in your videos about this, but aside from a filter location that doesn’t leave you much room for a belt style or one that cups the rear of the filter, I’m not seeing why one should change from what they’ve already got for this. Doesn’t seem like it has much torque just by it’s design. I’d like to see it used on a filter that’s way over tightened to test that out.

[@FordBossMe]

Wrong completely wrong You are talking about the product with knowing 0 about it

[@FordBossMe]

Not a wise idea and often speaks about how someone judges others without knowing

[@FordBossMe]

It's in the design, it's a torque multiplier so leverage isn't needed Until you use it don't judge it don't do any of that schit, you know what's not a wise thing to do

[@KendrasEdge757]

@@FordBossMe says the one judging someone asking legit questions and again, I’m ASKING you about the product

[@FordBossMe]

The cups take up to much room, the cups don't always get stubborn filters off. The cups are not easy to get in tight spaces with extensions and everything else The purpose of this tool is to get in tight areas nothing else will and provide that torque multiply factor It freaking grinds my gears when guys come by here and they start the blah blah blah stuff and don't know anything about the product If you don't know about it close ya mouth and don't say anything