I show my son how to rebuild his 2011 600 Rush. For Parts and Accessories: www.gobigparts... Follow us on Facebook: / gobigparts Instagram: / gobigparts
Пікірлер: 34
@RyanRoy-gn5zu Жыл бұрын
perfect . I love it. great job just lost the motor in my 600 rush last night. time for a tear down with my son.
@gobigparts Жыл бұрын
Great learning experience. Sled is still running great.
@PCBasics Жыл бұрын
I loved working on the sled with my dad!
@rickmattson6780 Жыл бұрын
Thanks for the video
@larrywarner931422 сағат бұрын
Obknow this is a 2 year old video, make sure you test the oil pump for the oil injection, first full tank of fuel mix it at 50:1
@gobigparts21 сағат бұрын
Great point and I did both. Ran great the last 2 seasons.
@larrywarner931423 сағат бұрын
Free advice, remove the seat , gas tank, that stuff needs to come off then the airbox you'll see wut i mean when you take all that other stuff off it opens up so your not fighting with no room to take the engine off
@gobigparts21 сағат бұрын
I did think of that after the fact. Great Advice for sure. Been running great the last 2 seasons.
@scottdillon7452 Жыл бұрын
Love the video, I’m going to be doing same thing with mine
@JasonRidesmoto Жыл бұрын
I'm eyeing a 2012 Rush 600 that has 10K miles on it... Might have to do this 😅
@edwardabrahamiii3742 Жыл бұрын
Earned a new subsciber i want to rebuild a 600 cfi in a 2014 polaris indy 800sp frame
@gobigparts10 ай бұрын
That you Edward. We love Polaris sleds and I love teaching my kids how to do things.
@edwardabrahamiii374210 ай бұрын
@@gobigparts nice dude! I'll show my boys how to do things myself.
@edwardabrahamiii3742 Жыл бұрын
Im starting to like Polaris!
@user-yf3vv7me9l7 ай бұрын
Great video! How many hours did it take to rebuild?
@gobigparts7 ай бұрын
Don't remember. We took our time and probably took a week of nights and then put it back together and back in over a weekend.
@lukestrobel1245 Жыл бұрын
Hello, Really enjoyed the video. Where do you send the cylinders to get plated?
@gobigparts Жыл бұрын
Millinnium
@user-hp8yr3ft4x10 ай бұрын
How did you clean the old sealant off case before reassemble?
@gobigparts10 ай бұрын
Scrapped it with a plastic putty knife and finished it with a razor blade being careful not to dig in an put any deep scratches. Went over it with a rag with some brake clean on it.
@coreymartin7068 Жыл бұрын
Do you prefill the cavity of the crankcase where the crankshaft gear meets the water pump gear with any oil?
@gobigparts Жыл бұрын
I did not. Not sure if you should or not. Mine does run good now.
@coreymartin7068 Жыл бұрын
@@gobigparts Okay thanks! I just assembled my 600 CFI bottom end and didn't either, I went through the Polaris shop manual and see nothing about requiring to do it. I usually work on ski doo/sea doo and those machines require an oil bath.
@thomaskilligvuk1124 Жыл бұрын
How do you set up your power values in your engine
@gobigparts21 сағат бұрын
These ones were manual vavles so just cleanned and put back in.
@thomaskilligvuk1124 Жыл бұрын
How do you set your power value when putting it on the engine
@gobigparts10 ай бұрын
Not sure wha your asking. Power Value?
@joshuadeschenes48742 жыл бұрын
Hey just out of curiosity, how many miles were on the motor when you rebuilt it.
@gobigparts2 жыл бұрын
Around 4k
@lukesmith91449 ай бұрын
Needed all that work after only 4400 miles?
@gobigparts9 ай бұрын
When you buy something cheap there is a reason. You don't always know how previous owners took care of it. With aything in life failures can happen. I happen to have aothere 600HO with over 10,000 miles on it.
@lukesmith91449 ай бұрын
@gobigparts I have the same motor with 6000 miles so this videos existence made me a little worried lol
@thomaskilligvuk1124 Жыл бұрын
How do you set up your power values in your engine
@gobigparts10 ай бұрын
These ones are spring return and pressure activated. So no need to set, just clean.