THANK YOU! THANK YOU! THANK YOU!. My son hit a curb and blew out his front right tire. After replacing the tire, the Traction Control Light remained on. No fault codes hit the car's computer. This hack fixed my problem.
@aarony3611 Жыл бұрын
This worked on my 2012 Camry XLE Hybrid that had the traction control light on solid after towing the car with the engine running (battery was dead). Then replaced the battery and the light was still on. Used the same pin out on the OBD, pressed the button to on twice (without my foot on the brake), then pressed the brake 8 times. The lights started flashing, and kept flashing for like 30 seconds and didn't stop. Then I turned off the ignition, removed the wire, and started it. Viola! The light is off!! THANK YOU
@MrSilvernblackblood Жыл бұрын
Will the traction control system still work after this? I mean if you push the traction control button will it activate or deactivate it?
@ph-ftw8273 Жыл бұрын
i went to get wheel alignment done yeseterday and vsc light still showing solid light. followed your step and it worked. omg i cant describe how happy i am ty
@stephanielivingston80224 ай бұрын
Oh my god that is why mine is on too!!! I had an alignment and it went on right after they gave me the car back. and the scanner gives no codes.
@ph-ftw82734 ай бұрын
@@stephanielivingston8022 it was easy fix. this video helps and works like a boss
@ElectraVibes7 ай бұрын
Your video helped me fix the handbrake and abs warning lights. Thank you so much for making this video ❤
@raulalfonsohernandezhuitro30322 жыл бұрын
No way bro!!! What a head ache i got tryin to turn that damn light off. And finally i got it off with out spending monet at all. It worked on mu corolla 2016 1.8 manual. Thanks bro!
@gmoney77844 жыл бұрын
It works!! I tried it on my 2011. After pumping the brakes 8 times I waited a few seconds, took the wire out and took the key out , finally put the key back in and turned on the car. Thank you, Stefen!!
@asilaydying6724 жыл бұрын
Glad to have helped you sir! Take care👍
@hopeekechukwu70193 жыл бұрын
Didn't work on my 2012 model. Cleaned my gas cap and did this but nothing worked so far. In fact, after my cruise control stopped working as well.
@asilaydying6723 жыл бұрын
@@hopeekechukwu7019 try replacing the gas cap completely too. Those gas caps have like springs inside them and you’re only suppose to turn click them at least one turn click. That’s what I did with mine I got a brand new gas cap and did the pin method and it worked for me.
@hopeekechukwu70193 жыл бұрын
@@asilaydying672 Actually the problem with my Toyota Corolla 2012 was a bad fuel pump. Once I replaced it, the check engine/track off stopped displaying.
@asilaydying6723 жыл бұрын
@@hopeekechukwu7019 yeah usually when you drive around with low fuel levels that’s what happens with bad fuel pumps because your gas you put in still is dirty regardless so your pump gets the dirty stuff if you drive around with a bad fuel pump. So always keep your gas full and you should try a product called BG 4K for your fuel system. It’s pricey but good stuff. And use BG MOA with your oil. Highly recommend. Just optional stuff though sir. Have a good day sir
@nanocortes113 жыл бұрын
I did a old trick and turn the switch until the lights come on but DONT turn the car on. Then pump the gas pedal 3 times and wait a couple of seconds then turn the car on and that should work it did for me. This removes the abs and brake light...
@kiotick253 жыл бұрын
Appreciate the video, worked on my 2011 Tundra. I replaced the rack and pinion and this traction light came on, after a few hours of research I found your video.
@asilaydying6723 жыл бұрын
Glad to have helped. Have a good day and be safe
@datznasty14754 жыл бұрын
Worked on my wife 2014 Toyota Corolla thank you so much
@asilaydying6724 жыл бұрын
Nice. Glad to have been some assistance 👍
@LeoRousseau2 жыл бұрын
My 2014 corolla abs and traction light are both on together. This happened a couple years ago, but I don't remember what I did to turn it off. Fluid is up and battery disconnect didn't solve it.
@beenheredoneit.43812 жыл бұрын
2016 corolla s 1.8l. Changed cv axel and tie rods inner and outer. I adjusted alignment up wrong on driver side tie rod and threw traction light. Got alignment done and this reset my light.
@litomvc962 жыл бұрын
Thank for posting. I try today and help reset the light my corolla 2016. Give less worry for today my problem.. God Blessed you.
@RoadHeros610 Жыл бұрын
Dude 7 was never suppose to start the car up like that crazy ..but it worked..pretty good
@movahedsediqi2 жыл бұрын
Wow i love it, it worked on my corolla 2010, thnx bro
@willsuero183025 күн бұрын
Hi, i need to do it now, should I start the enginge with the small cable conected too.?
@justmedz3 жыл бұрын
It's work for me. Coralla 2015. Thank you.
@erikaneyakndue35162 жыл бұрын
How were you able to pump the brakes , when it's gonna be stiff when the engine is turned off
@derekdonovan69706 ай бұрын
This worked on my 2016 rav 4 Thank you
@gfysyoutube Жыл бұрын
Worked like a charm Thank you!
@Ppau14 ай бұрын
Thank you, worked on auris 2012-2012 E150
@anthonytran98290 Жыл бұрын
Great man . my car have same problem. I will do it tomorrow
@FreedomofSpeech8653 жыл бұрын
Yes, disconnecting the battery did not work. Will try this on my Toyota Rav4
@kernie69692 жыл бұрын
Did it work?
@christopher23. Жыл бұрын
Did it work I have this on my rav4 to
@nipsey32218 ай бұрын
Fixed my 2007 Lexus is250 🙏🏽
@cesarjorgemurillobarientos18132 жыл бұрын
Very good master
@josemaysonet57943 жыл бұрын
Thank you i fixed my car
@WaliKhan-rl6uw2 жыл бұрын
Thank you so much sir good job 👍
@mattrock42702 жыл бұрын
Thank you! Worked on my 2015 camry
@romainekerr86087 ай бұрын
Thanks big big help
@ahmedyamen66962 жыл бұрын
My brother, please, the link that you did in the fish of the test, when is it removed, how to adjust the programming, please reply
@asilaydying6722 жыл бұрын
Just follow everything. And don’t turn the car on completely. Do everything and when the lights start flashing it should go off on it’s on. And when that happens you can safely turn the car off and remove the metal pin. Make sure they’re on the right ones or you’ll end up shortening something out. Good luck👍
@xyz201210002 жыл бұрын
Thank you so much . Mega million 🙏
@abdalmuatsam216224 күн бұрын
اخي انا نظفت حساس الصالنصة وظهر عندي علامة المحرك ومانع انزلاق ذهب للبرمجة يظهر عطل بلحساس معلم كان جيدا ما العمل رجاء
@lodhiautos97613 жыл бұрын
Hi bro, you are reading your dlc wrong way, In your car the upper left most pin is number 1, the last one is number 8. the lower left pin is number 9 and the last lower right most is the pin number 16. Thanks.
@christophercarmody25043 жыл бұрын
3:10 “…holy shit it worked!”
@Saa42808 Жыл бұрын
Do you know any trick to make the cruise control works as I have tried every possible thing, changed the cruise control and fuse is fine. thanks
@MrSilvernblackblood Жыл бұрын
Will the traction control system still work after this? I mean if you push the traction control button will it activate or deactivate it and the indicator light still appear on and off in the dash?
@kennethhelmers19273 жыл бұрын
Wow it worked thank you
@sinanozsoy Жыл бұрын
Hi.Can i try for chr 2016 1.2t? . is it run?. Thank you for video
@goranpesic38924 ай бұрын
Work on my celica t23, TY
@samueldamptey37523 жыл бұрын
Worked... Thanks
@amirkhanahmadzai49639 ай бұрын
Will it work on 2007 4runner my anti skid light doesn't work when tires make slip in mud or in snow it doesnt blink. I dont know why it stop working
@stevemartin31009 ай бұрын
Whenever I do that cruise control light shows up
@abdodomachkour2411 Жыл бұрын
Hi. Please I want to know if the light still off after 2 years ago? 😅
@CristianHernandez-cs7sl Жыл бұрын
SOS un crack😻💯😫
@rasheedcader60223 жыл бұрын
Bro I have same issues on Toyota Prius.what can I do
@DaniCFTTV3 жыл бұрын
Works perfect :)
@Jessi.mari.e Жыл бұрын
So this worked for me like 8 months ago and everything went away then came back like a month later. Revisited the video and now it’s not working for me any idea why ?
@techtudent Жыл бұрын
My problem was just Wheel angle sensor. go and change it
@angelawise7240 Жыл бұрын
I followed this video and it worked my CG is 4 and the TC is 13. However lights disappeared but once I went to test drive it the check engine light and traction light came back on. I desperately need help. I replaced my speed sensor and my brake light switch. I'm defeated. Any guidance would be greatly appreciated. Thank you
@adrew1963 Жыл бұрын
sister has same issue with her corola did you find anything out
@angelawise7240 Жыл бұрын
@@adrew1963 I was able to fix it, I replaced my speed sensor and brake light switch. However that was not the problem. The wires from the speed sensor were chewed by a squirrel or rat. They chewed 4 inches of wire. Once we replaced the wires and reset codes the lights went off and car shifts in gear. No issues,
@adrew1963 Жыл бұрын
@@angelawise7240 did you also have the check engine light on to because I tried wire 4 and 13 but came right back immediately so still working on it
@angelawise7240 Жыл бұрын
@@adrew1963 Yes check engine light and traction light. But it's the wires coming from the speed sensor itself. So you need to trace it from the speed sensor on the transmission and up.
@angelawise7240 Жыл бұрын
@@adrew1963 I can take a picture for you and that might help you.
@yusuphabah48152 жыл бұрын
Good
@davidruiz5383 Жыл бұрын
What happens when you slam on the brakes.
@harmindersingh27383 жыл бұрын
I try with 2009 Corolla CE it didn’t work for me can you help?
@homiwalls Жыл бұрын
Oh shit that worked in my 2013 Corolla! Thanks bro
@drewshearman6718 Жыл бұрын
Can anybody tell me if this will work on my 2017 hyundai sante fe sport???
@elmerdecio60413 жыл бұрын
In toyota vios 2010, what pin?
@mckoylach16223 жыл бұрын
Does this procedure applied to my 2010 Corolla,too? Because I have a VSC and Trac off lights on
@asilaydying6723 жыл бұрын
Try it. Should work fine.
@mckoylach16223 жыл бұрын
@@asilaydying672 thank you
@daniellanderos3141 Жыл бұрын
Was rpm and speedometer off too? I’m having the same problem.
@whyyhhhh59463 жыл бұрын
I have a prius 2012 and it has hard stearing but no errors or lights and it feels bad driving, also it forces to go left even i have done alignment, should i do this method?
@akii00773 жыл бұрын
Check steering pump and fluid
@MrMarz-fe8yw4 жыл бұрын
I can’t believe this worked
@luisquintero46962 жыл бұрын
I’ll do that to mine today, lyk 😂.
@milygonzalez372611 ай бұрын
Will this work on a 2008 avalon?
@Bipolarlife69699 ай бұрын
Just get a 20dollar code reader plug in and reset codes😊
@rocamoca82184 жыл бұрын
Do you have to keep the wire on the obd?
@asilaydying6724 жыл бұрын
Yes. Keep the wire on there.
@ahmedyamen66962 жыл бұрын
@@asilaydying672 How long do we keep the wire
@mikeswaze1270 Жыл бұрын
@@ahmedyamen6696 hello
@mikeswaze1270 Жыл бұрын
After reset. Does the ABS light comes back after driving excess amount of miles. ?
@waqastariq932 жыл бұрын
This did not fix my problem and light is still on. So is it my speed sensor or steering angle sensor that's faulty?
@asilaydying6722 жыл бұрын
Maybe try changing out your speed sensor? You’ll have to take the wheel off it’s a simple fix. And you can try it again. First of all what lights came on?
@waqastariq932 жыл бұрын
@@asilaydying672 It was just slip indicator light, replacing steering angle sensor fixed it.
@henryperez71358 ай бұрын
A mi me funciono en un toyota corolla 2010 LE
@RobertoRamirez-tx9bl7 ай бұрын
hola amigo, estoy por probar este truco para mi corolla 2011, sabes que estamos haciendo en realidad ? no estamos quemando nd ?
@gerardomontes38002 жыл бұрын
En un nissan como puedo hacer eso ????
@samuelakingbesote38583 жыл бұрын
Do you have to take off the pin before you switch on your engine after the initial blinks
@asilaydying6723 жыл бұрын
No just start it up and it should go away and finally take off the pin.
@user-mt4wl5jw1o Жыл бұрын
عملت نفس الطريقه على تويوتا يارس 2014 ولم تنجح
@christopher23. Жыл бұрын
Does this work with a 14 Rav4?
@Izabella_playz4 жыл бұрын
I just realized mi toyota corolma 2005 does not have my ABS relays i the fuse box, will it be a problem??
@tinkerbell697142 жыл бұрын
Did you try pressing hard on your brake pedal. Pressing hard on the brake pedal will make the traction light turn on. You just press firm all the way and hold…and to turn it on repeat the same press down firmly on break pedal and hold. There’s no need to pump the pedal. I discovered this because I like to push buttons to see what happens …🤓
@tinkerbell697142 жыл бұрын
I’ve done this to my 2010 Prius and recently to my Venza.
@MrBritrider Жыл бұрын
Are you saying that pressing and holding the brake pedal will turn off that traction control light with or without that jumper wire?
@tinkerbell69714 Жыл бұрын
@@MrBritrider you need nothing else just press firmly all the way down on the brake pedal.
@oscarvicpe7650 Жыл бұрын
Wouwww it works on my 13 corolla thanks alexhoney
@tinkerbell69714 Жыл бұрын
@@oscarvicpe7650 😉
@kevinmarrero642 Жыл бұрын
Will it work on a 09 impala?
@alexotey70352 жыл бұрын
What does the light mean
@fivestarhemi28773 жыл бұрын
Does this work for a 2011 scion tc? "Help"
@asilaydying6723 жыл бұрын
It should work. Try it out. Just remember the steps
@fivestarhemi28773 жыл бұрын
@@asilaydying672 will do, thanks 👍🏼
@akabdul31674 жыл бұрын
How to program toyota corolla2005
@pono3213 жыл бұрын
How?
@DanEngell3 жыл бұрын
So the light on the dash is off but now the headlights are in strobe mode? Awesome.
@erikaneyakndue35162 жыл бұрын
Damnnnnn 😂😂😂😂
@HorsepowerHouse Жыл бұрын
Camera does that.
@celestehauglin8249 Жыл бұрын
Why did your headlights start strobing?
@asilaydying672 Жыл бұрын
Just how it looks on video. Those are the DRLs
@afiivictor75342 жыл бұрын
You did not show or mention when to pull off the wire.
@richardwilliams35862 жыл бұрын
I tried this but didn't work for me
@haseyhassan999811 ай бұрын
How mazda reset
@murtazahussain21142 жыл бұрын
I did the same thing it didn't work bro
@smkid134 жыл бұрын
What kind of wire did you use?
@asilaydying6724 жыл бұрын
I'm not sure it was just a basic wire man. Nothing fancy. As long as it can stay into those little holes it'll be fine.
@franciscogarcia18673 жыл бұрын
What does that light even mean
@franciscogarcia18673 жыл бұрын
Plz help
@im9_4 Жыл бұрын
it didn't work on Corolla 2010 le
@nathandiaz37424 жыл бұрын
Ima try on my 2016 right now lol got into a hit and run also :(
@asilaydying6724 жыл бұрын
Hope it at least helped you out man👍
@pedrobacchus69862 жыл бұрын
Its F-ing bitch when this happens
@michaelbailey26402 жыл бұрын
If it needs brakes will the light come on
@asilaydying6722 жыл бұрын
No. But you should hear like metal to metal grinding or before that gets worst a little screech. Just look at your brake pads and see or have someone do it for you. Shops are a lot though.
@Proiker3 жыл бұрын
Donde gbfg
@user-fz9en9hk1h10 ай бұрын
اربي
@HM-ke1qm4 жыл бұрын
Did that shit really work?
@asilaydying6724 жыл бұрын
Yesssir. I disabled mine. It's a simple step check it out
@hectorrogel4 жыл бұрын
Yes it did for my Lexus too
@hectorrogel4 жыл бұрын
Saved me a trip to dealership and around $100
@hectorrogel4 жыл бұрын
actually it worked but as soon as I drove off, the lights came back on so not sure what’s wrong with it. Imma try new speed sensors then I’ll update my comments
@asilaydying6724 жыл бұрын
@@hectorrogel I bet it's your sensors man. Update me once you get it done.
@samikhanmarwat Жыл бұрын
Watsapp number
@pitt13542 жыл бұрын
L0p8l0
@Iahusha777Iahuah2 жыл бұрын
This is irresponsible
@lodhiautos97613 жыл бұрын
Hi bro, you are reading your dlc wrong way, In your car the upper left most pin is number 1, the last one is number 8. the lower left pin is number 9 and the last lower right most is the pin number 16. Thanks.