Thank you so much for this video. I bought a brand new blower motor and it still didnt blow and air. I then stumble upon this video and saw my connector was burnt as well. Replaced the pins and my ac is working fine again. Once again, thank you!
@Mrjibs7 ай бұрын
Hey man we had the same problem with our ml 350. Thanks for showin everybody where the wiring was. This Saved us from a hot summer☀️
@thepitstop94217 ай бұрын
Glad I was able to help
@firetaz392 ай бұрын
You saved me a lot of heartache , $$$ and shop time. I had EXACTLY the wire plug issue in your video. Easy fix. Bypassed the plug with red wire and made solid solder connection with a lot of insulation for permanent fix. Thank you so much for posting....
@tyrellseymour77242 ай бұрын
THANK YOU SIR !!!! AC worked perfectly till a few days ago started right up after watching your vid
@qhpainters2 ай бұрын
I have a 2014 ml350 4matic and this was the problem with the blower cutting off. Thanks so much, a mobile mecanic was charging me almost $700 to put in a new blower motor but its not the blower motor. Thanks again.
@juliusrush68452 ай бұрын
You save us a lot of money. That was the problem. Thank you very much.
@rajkateram23004 ай бұрын
Thank you man you are a lifesaver, saved 15 hundred on this.
@lwadams2 жыл бұрын
Thank you my dude, this vid just saved my ass, 32°C in the UK today and thought my AC had given up. Thanks to you it's now working! 🙏
@sniperelite2528 Жыл бұрын
Thank you, u saved a lot of time searching for that X18 connector
@jamesbrady69873 жыл бұрын
2015 gl450, this fixed my ac blower. Thanks for the video.
@d.b.carter12005 ай бұрын
OHHHH MY GOD This is Exactly what i just paid Mercedes 230 to tell me because this is the only video that exist showing this issue. Thanks for posting this.
@thepitstop94215 ай бұрын
Glad I could help!
@d.b.carter12005 ай бұрын
@@thepitstop9421 does it matter if you use brass instead of the aluminum or zink ones. And does the battery have to be disconnected?
@Pdubforever12 жыл бұрын
Bruhhhh your video saved me in a clutch!! Thanks man
@joaquinsanchez72013 жыл бұрын
Thank you soo much!!! after many attempts of trying to nail wht was wrong with my blower is finally fixed. Great advice!
@nathanbaldauff91163 жыл бұрын
You saved me a lot of $$ with this video. Thank you! I had exactly the same problem with the red wire.
@TheVitusGarageAutoblog3 жыл бұрын
You literally saved me so much money!!! That fixed my issue!! Thank you for posting
@toneloc6983 жыл бұрын
Bro! Thank you so much for this I've been having trouble for weeks and was about to take it in until I saw your video. This is exactly what happened. You saved my butt!
@joanbeltre3 жыл бұрын
Brother! Thanks for this video. I've bee suffering with no AC and I know going to the shop they will say whatever they want to make their money, specially if taken to the dealership. Thanks a lot!!! As soon as I pop the carpet up, it started working. So I finished the job after. Thanks!!!!!
@inhousetx Жыл бұрын
Hi how did you pop up the carpet?
@christopherwarden80407 ай бұрын
Thanks guys saved me some cash!
@Bahller-k2d Жыл бұрын
TY! Pulled that wire out of connecting block and spliced it. Left it to the side after repair and just plugged connector block back together since the other 4 wires were good. Problem solved!!!
@laxchb3 жыл бұрын
Found the exact same problem. 1. Just replace the connectors? 2. What is causing the burnout? Will it continue to be a problem after replacing connectors?
@MohdHareef-n9i2 ай бұрын
Thanks a lot bro. i had the same problem
@piterqh2 жыл бұрын
You are kind to share that information, I fixed my too, you saved 1100 dealer repair price. Thanks a lot. I can give you a donation for that info,
@richardloveless62942 жыл бұрын
you were exactly right on. it was all you said it would be. thanks a million
@garthwalters1968 Жыл бұрын
Thanks alot for the information help me out big time
@TimothyArmstrongamblixVR3 жыл бұрын
Brother! I hope this just saved me something....I had MBZ diagnose while it was in for a recall, they said it was the regulator resistor...so I ordered one from Amazon JIC...thing is, mine was intermittent also...if this is the issue...I owe you a beer or 12!
@petersturk55732 жыл бұрын
Wow!!! This just happened to my 2015 ML350. I pull the burnt wires out of the connector, made a new connection and covered it with heat shrink.
@TheKucciLee3 ай бұрын
Where can I buy the connector pins?
@geraldknott74488 ай бұрын
Is there instructions for how to get the carpet up?
@dali3127-c111 ай бұрын
Thank you for the diagnosis. Would you please share how to fix this?
@tjgallo7 күн бұрын
Agreed.. would be interested in knowing exactly what you did to resolve (disconnect and solder with heat shrink, etc...).
@GandGHomes3 жыл бұрын
How do you correct the issue with the red wire
@bryanbuchanan47845 ай бұрын
First, thanks for posting this video. Is there a part number for the connector? The housing on mine was melted more than the one you show.
@thepitstop94215 ай бұрын
Typically those connectors are sold as part of harness, but given that this is a common issue, call the dealer and see if they have any availability on just the connector
@user-wq3qz2si9j3 жыл бұрын
How do you pop the carpet open? Just pull it up?
@naricl3 жыл бұрын
i did exactly as the video n it solved my problem
@naricl3 жыл бұрын
my ml 350 2015 rear right side passenger door stopped working can u pls help
@SuperRobinmc2 жыл бұрын
Hello , I found the same issue with my GL but can you please tell what to do after unplugging the red cable ...just leave it loose with no connection ?
@Dlong.entertainment2 жыл бұрын
I was wondering the same thing. Did u fix your problem ? I don't wanna go to the dealer if I can repair it myself lol
@josepandal46602 жыл бұрын
My ml 350 4matic 2011 is blowing air through different ac conduct and sometimes not blowing at all I will check tomorrow... fingers crossed 🤞
@coltonmcnallie29625 ай бұрын
Literally you show everything but how to access the wire 😆 can’t fix it that way
@qhpainters2 ай бұрын
Have to unscrew some panel, then take off another panel, then pull back the carpet
@jasonmoriset92922 жыл бұрын
Does this apply to the gl series as well?
@thepitstop94214 ай бұрын
Yes
@krystinavaughn2885 Жыл бұрын
How do you get under the carpet?
@jdl728 Жыл бұрын
I can't get my carpet up either
@inhousetx Жыл бұрын
I have the same peoblem. I dont know how to get under the carpet. Did you find a solution?
@mistrfinga10 ай бұрын
Anyone?
@Tubetrekky8 ай бұрын
Pull long doorsill plastic out with something to pry up gently. Then a couple hex screws along right under where feet would go and on plastic nut towards front incline
@davemc36502 жыл бұрын
That connector is so cheap and thin lock broke from heat and wire come apart little by little
@xavy0093 жыл бұрын
yes it solve my issues
@ناصرليظه2 жыл бұрын
تغير رشاش GLk 350
@deeo1973Ай бұрын
Thank you so much, my friend! Send me your email, I'd love to Zelle you a cup of coffee, at least🙏!