2012 Jeep Liberty Power Window & Power Lock Fuses

[@احمدالمعموري-ق6ه]

ank akhisayiy mahir ...ladi mushkil fi rafe nafidhat qurb alsaayie wafath waqufl aiqfal aleajal fi kuntirul aleajlih waqumt bitabdil alkuntirul walam yataghayar shay min aleutl arju mink musaeadati walak jazil alshukr ...nawe aleajlih duj natru

[@isaac348]

I’ve changed the driver’s side controller 3 times. Now again the both driver and passenger side windows will not open or close. Passenger side switch doesn’t work either. Locks and side mirrors no problem. What’s up.

[@vasdiaboli637]

THIS is why I am here too!

[@beastzl1garcia108]

Me 3

[@jessicabenavidez3176]

So I have a 2012 liberty. Just recently, the power locks don't unlock the passenger door or the back doors. The only door that works is the driver side. The strange thing is that the windows all work. Also, while this went out, my trunk doesn't unlock, but the glass opens. Tried troubleshooting. Checked all the above fuses and restarted the battery. It's still not working. Any suggestions ?

[@LindaGwaltney-bx4zv]

Both windows on front want work on 2011 jeep liberty possible fix

[@davejames2015]

Me to figure it out yet?

[@ricksweet33]

Can you tell me where and what color driver door trigger is ?

[@tbone1765]

So I have a 2009 liberty limited and I can operate all the windows from the driver side but nine of them are working from each door..I put the master window lock switch in and off and it makes no difference..still can only open and close the window from the driver door controls..all the windows go up and down so it can’t be the motors and it can’t be all three window switches on each door..so the master window lock must be no good! There isn’t a fuse just for that one master window switch correct??

[@DEUTSCHLAND.007]

Best explanation I've found on KZbin; clear, concise, to the point. Thank you for sharing your knowledge & skills 🙏

[@SWAGGY_C2319]

What’s should you do if the doors will unlock, but won’t lock? I have a 2010 Jeep Liberty and the doors unlock remotely and from the door module. It will NOT lock remotely or from the door module.

[@Steve-cs3tt]

Thanks for all the good information. I just got a 2012 Liberty and cannot find out how the rear hatch opens. Any answers ??? Again Thanks, Steve

[@chrisc1291]

Hello. I plugged in the new master control panel on the driver side. But I now have no control over the front windows and cannot lock the car. I will admit when I plugged in the new master class from switch, I noticed it is slightly different and it has different number of plug in pins underneath. Now the old one / and new one do not supply power to the front windows or locks. Do you think I blew a fuse?

[@TheCapitanAmericano]

On my 2009 liberty none of the doors lock or unlock, is that the 25amp fuse that would control that? Also what is it labeled on the fuse box diagram?

[@SDguy3030]

Thanks a lot. The front windows finally went and I figure I gotta replace the fuses.

[@muhammadjawadkhan9841]

My jeep liberty 2009. Passenger side door doesn't lock with key or any button have to lock or unlock it manually. Rest all doors work automatically. machine was checked and it is fine. Can you tell me if it a fuse fault.

[@nicholasbartels3392]

Do you happen to have a video explaining the relays? I have a 2011 and the headlights are stuck on even when the vehicle is off and drains the battery, my brights do not work and I also do not have any power locks

[@kaylatrujillo7467]

I have a 2009 dodge nitro but when we replace the door lock fuse it burns the fuse immediately ☹️ any ideas on how to help so we can get our locks working?

[@theflex2496]

Anyone kno why sometimes my door doesn’t wanna luck ?

[@TheMrspeedyg]

Is there a relay for locks still not working fuses are good

[@letyperez8226]

My 05 liberty sports 4 windows doesn’t go down and sun roof

[@letyperez8226]

Can you help me what’s the problem and also

[@smalldog221]

what wire do I test to see if I am getting power to the driver side switch?

[@kennedycleveland5277]

My fuse is blown, when I try to put the new fuse in it arcs, what's my problem?

[@BigDaddyRob1309]

I have the exact same problem. Did you figure it out?

[@alexandravera4157]

I have a 2008 Jeep Liberty. The Master switch on the driver side opens the driver window and the front passenger window but will not open the rear passenger windows. The front passenger and rear passenger window switches do not work at all. The only windows I can control are the driver and front passenger windows from the master switch. Not sure if it's an issue with the fuses, or perhaps the wires. Looking to get some troubleshooting tips before spending money replacing all 4 switches or taking the door panels apart to replace the window motors. Please help :)

[@chrisc1291]

Did you figure it out?

[@KillaCowboy]

Hey I got a 2010 jeep liberty and the drivers and front passengers switch doesn't work from the drivers side. I can use the front passenger from its own door but not from the drivers side. Both rear window switches work from their own door and from the main drivers switch. And the power lock doesn't work at all from front driver or passenger side. I changed the main drivers switch and the left control module but nothing changes and all fuses are good from what i see

[@LehewTech]

Its likely that the master switch itself is bad.

[@KillaCowboy]

I removed the door panel and found a control module that has 8 spots but only 2 through 5 are in use and numbers 3 and 4 seem to have a bit of corrosion on it. Do they have anything to do with my problem?

[@KillaCowboy]

@@LehewTech lol didn't realize i already had a comment. Changed the master switch still same issue

[@davejames2015]

You ever figure it out?

[@KillaCowboy]

@@davejames2015 no, I saw something about changing the whole fuse box under the hood, but I've yet to. Gave the car to my sister hopefully she buys the new fuse box and we can determine if that's it. I'll try get a link to a new one and you may be able to tell me

[@SGBanny]

My issue is the lock button doesn’t work on ether door driver/passenger or the key but the unlock button works on all. When I press the lock it only sets the alarm and doesn’t lock the doors. everything else works as it should. Anyone have any ideas?

[@sallygouchenouer8864]

2012 Jeep Patriot rear hatch lock

[@user-xl5ep3ho1c]

Fellas? Really. What about the women that watch this?? Real nice

[@BjBnet]

Get back in the kitchen

[@atomicfusionvideo]

Sure if yiu like you like your food burned And the Taste of oil and grease on it

[@pointsandpetals]

My locks won’t work from doors or key. Any ideas? No power to them at all so I can’t even open the back hatch.

[@Two-ToneChrome-]

I have the same issue did you find any solutions?

[@SonjhaiMeggette]

@@Two-ToneChrome- me too, dammmm

[@Two-ToneChrome-]

It’s the Tipm box, get it looked at to be sure but get it replaced soon my jeeps in the shop in pieces now because I didn’t right away.