Replacing sliding door roller on a Mazda 5. Left roller part number: C513-73-2B0D
Пікірлер: 39
@gregorywoods15386 жыл бұрын
Very helpful. Hard to find videos on Mazda 5...Thank You!
@sdrivegarage3 ай бұрын
Thank you. I can confirm that this fixes a sticky door. My rollers were not obviously broken like yours, but the door was extremely difficult to close. After replacement, it's smooth like butter.
@edwinj.t.p59986 жыл бұрын
great vid it's cool to see that you uploaded 2 recent vids on same day. Fyi I think your the only one that is to this day, sharing vids on this type of unique vehicle. great job thanks.
@alexnounopoulos26365 жыл бұрын
Thank you so much for this video. Absolutely made my day and saved me a couple of hundred dollars. Much appreciated!
@sdrivegarage9 ай бұрын
Thank you! Great job. You told me what I need to know without a lot of extra talking. I only wish I had replaced this part before I broke the handle trying to slam the door harder and harder. Sigh.
@kataklysmdl2 ай бұрын
An addendum to this problem. After replacing the roller I noticed the roller would fall out of the track. The track on my car was moving down as the door slid back. The reason was the nut was loose and allowed track movement and the sliding roller was falling off. So when you closed the door it pushed on the rubber. So I had to unsnap the plastic inside the car to reach and tighten that nut so the track would stay in place, solid. The door worked as new after that with tight track and a new roller.
@yeolblt2 жыл бұрын
Thanks very much for showing this helpful video. Removing the tail light also allows this roller to be cleaned and lubed properly :)
@missylea2977 Жыл бұрын
THANK YOU! This is helpful and very easy to follow 🙏🙌❤️
@mustangjoe83526 жыл бұрын
Great video keep up the great work I’m sure it’ll come in handy with my 2011 Mazda 11
@spidey4everfr5 жыл бұрын
Thank you so much for this video!!
@jacobframe87692 жыл бұрын
Very helpful, thank you for sharing.
@mattkeefe38504 жыл бұрын
Thank you. You nailed it!
@marlonbaird6070 Жыл бұрын
Hi have the 07 Mazda MPV 2.3t motor died while door is open..now does not want to close auto or manually
@kgoldric2 жыл бұрын
Did the new part last? I'd be afraid whatever caused the last one to break could ruin a new one too. Maybe there was some debris in the rail that messed up the original.
@burleylien22634 жыл бұрын
great job. thanks for this video
@r.marcosroel36045 жыл бұрын
Very helpful. Thank you.
@james425192 жыл бұрын
Hope never have to do that. Have a 09 mazda 5 the older one. Backed into something and metal bent where sliding door comes out of back so no way to take it off now. If i had newer one could have replaced light but the older one lights are high.
@arideout776 жыл бұрын
thanks for the video, did that fix today. lost the 3rd bolt into the door but not sure that is avoidable.
@sethhorning68764 жыл бұрын
Nice video. I noticed the third pin was gone on your video. Did you drop it into the door? I did that to mine as well. I took the door apart to get it back out. Turns out you don't need to disassemble that piece at all. Just an fyi for anyone else who attempts the job. Don't mess with the one that has a nut. Leave it alone or you'll drop it in the door and cause yourself a huge headache.
@jerrickb2 жыл бұрын
@@sethhorning6876 I wish I had read this before I attempted this repair as I too lost the bolt as it fell inside the door! Glad to hear you were able to retrieve yours? Was it difficult? I am afraid of having to take my door apart!
@sethhorning68762 жыл бұрын
@@jerrickb don't take the door apart. It was a huge pain. If you do make sure you have a good video and a lot of time 😅
@jerrickb2 жыл бұрын
@@sethhorning6876 if I leave that pin forever trapped in the door; do you know if it's possible to replace it with something else in the assembly? I can't even remember what it looked like since it fell so quickly inside the door.
@MaihiBarber Жыл бұрын
unplug the rubber plug at the bottom of the door and use a magnet attachment to retrieve - I dropped both left and right sides.. 🙂
@jacksdad26266 жыл бұрын
Great video thank you. Will you please make a video showing how to replace pcv valve on 2012 mazda 5.Thanks again
@sigor20116 жыл бұрын
jacksdad2626 no plans for that at this time. Does not need the replacement yet. If yours really does need to be replaced, search for Mazda 3 videos as they are basically identical. I see one shows that you maybe able to do it without removing intake manifold.
@RedfernDE5 жыл бұрын
great help!
@FixItYerself3 жыл бұрын
interesting. our 08 doors are getting sticky half way through the rail. maybe it's the middle roller
@deiseted5 жыл бұрын
Cheers for vid!
@pavvi12533 жыл бұрын
Great 👌 thanks!
@12carlsberg5 жыл бұрын
Great video, I have the same problem with my 5. Did you buy the part online? Can you share where you bought it?
@sigor20115 жыл бұрын
Part number: c513-73-2b0d I can't recall where I got mine, might have been local dealer. Type that part into Google and few places sell it online. I see: parts.mazdaofwooster.com/oem-parts/mazda-roller-assembly-c513732b0c
@gabrielmarticorena16442 жыл бұрын
Thanks for the video. Where can I buy it? I live in Canada.
@sigor20112 жыл бұрын
I got from a Mazda dealer
@stephen892 жыл бұрын
Maybe that’s what’s wrong with my 2006 Mazda MVP cause my sliding door does not slide smoothly
@sethc66636 жыл бұрын
Good video, also highlights the huge rip off from car manufacturers, having to buy the whole assembly for the sake of a few roller bearings. smh.
@stephen892 жыл бұрын
Maybe that’s what’s wrong with my sliding door with my 2006 Mazda MVP I’ll take a closer look.Cause it does not slide smoothly
@jayontario72856 жыл бұрын
The 06 model tail.lights are a lot harder to remove
@james425192 жыл бұрын
I have 09 mazda5 and the back lights come off east. 2 screws and pull pull and it comes off.