2013-2019 Nissan Sentra complete brake job, and flush

[@michaelm2573]

Very well done. Can you tell me where you got the torque spec for the front caliper bracket bolts? Another video says 122 ft. lbs. I checked Alldata and it says 122 as well. But that seems awfully high, approaching the limits of the bolt (assuming it is an M12 grade 10.9).

[@SCOOUBIN]

I changed my rear calipers and rotors and now it won’t bleed any help

[@RustBeltAuto]

@@SCOOUBIN is the cap off the reservoir?

[@nbatalkz6635]

Hello, I accidentally knocked of one side of the wheel cylinder. Is that bad .

[@RustBeltAuto]

Only if it leaks. It should be bled.

[@nbatalkz6635]

@@RustBeltAuto will do thank you for replying

[@carlosrosales4791]

So u have too bleed all four

[@RustBeltAuto]

If you want to do a brake flush, yes.

[@mustafanaji6591]

GOOD JOB - GOOD CAR.

[@joshuaterry9582]

Is this same for equal year Nissan Altima ?

[@RustBeltAuto]

They are different cars, with different parts. But they all have brakes.

[@keegancan]

Thanks. How often are you supposed to change the fluid?

[@RustBeltAuto]

Look at your owners manual.

[@keegancan]

@@RustBeltAuto It doesn’t say.

[@RustBeltAuto]

@Keegan Maroney you can call the dealer, and ask service I guess.

[@keegancan]

@@RustBeltAuto Ok

[@keegancan]

@@RustBeltAuto I found out it’s 65,000 miles or 78 months. My car is like 25,000 and 3 years. They told me it needed maintenance like 3 weeks ago. Whatever I guess.

[@rlucero113]

What is the black thing that he put with a little brush before to install the pads.'.?

[@RustBeltAuto]

It's disc brake quiet. Should be a little packet of it with your new pads.

[@HellOfFire2025]

I never do it this way, putting a new parts and dirty glove on

[@LD-wu9so]

Great video sir. But can you PLEASE confirm that the rear bleeder screw is 8 mm. Also, I am very interested to know the diameter of the bleeder screw tip (head) where you have that black connector on the end of the clear tubing. Thanks.

[@RustBeltAuto]

Most all Japanese bleeder screws are 8 and 10mm. 3, or 2mm hose should work, and have never bothered measuring the thing.

[@carlosrosales4791]

Or only two the front ones

[@BarnStangz]

You like to live dangerously wearing those Chinese work boots!!! When is tonights live stream!!??

[@RustBeltAuto]

When I feel like it.

[@SuperM1687]

Yo, where's Media Guy

[@mediaguy4037]

Looking at a 2015 Stick Hole 4x4 for sale. Girlfriend says it's too violent for her.

[@RustBeltAuto]

@@mediaguy4037 It's probably your driving.

[@MichaelRei99]

Now I know how not to do it. Thanks!