2013 Infiniti G Sedan - HomeLink® Universal Transceiver (if so equipped)

Your HomeLink® Universal Transceiver's control buttons are located along the bottom of your rearview mirror. The system can consolidate the functions of various individual hand-held transmitters to replace devices that operate garage doors, gates, lights, or security alarms. HomeLink® is powered by your Infiniti vehicle's battery and requires no other power source.
Please note that you'll need all of your hand-held transmitters, such as your garage door opener, to successfully program HomeLink®.
To get started, you will first clear the memory by pressing and holding the two outer HomeLink buttons for 20 seconds, until the indicator light slowly blinks. Then, you can release both buttons.
Now you're ready to program.
To begin programming, position the hand-held transmitter 1 to 3 inches away from the HomeLink® surface.
Now, using both hands, simultaneously press and hold both the HomeLink® button you want to program and the hand-held transmitter button until the indicator light flashes, changing from a slow blink to a rapid blink.
When the indicator light flashes rapidly, both buttons may be released. The rapidly flashing light indicates that the device has been successfully programmed.
To activate a programmed device, press and hold the programmed HomeLink® button. If the indicator light is solid, training is complete and your device should activate when the HomeLink button is pressed and released.
If the indicator light blinks rapidly for 2 seconds and then turns to a solid light, there are additional steps required to program your device. See your Owner's Manual for more information.
If you have any questions or are having difficulty programming your HomeLink buttons, please refer to the HomeLink web site at: www.homelink.com or call 1-800-355-3515.

[@EvaUnit_01]

How do you do this on a garage?

[@jgionti3]

Thank you so much for this video. I finally programmed my Infiniti to open my garage. Great job and thank you