2013 X5 N63 E70 AC compressor drive belt replacement BMW

[@junkname9983]

I've searched all over KZbin for how to do this, and you're the first person who actually have a good clear video on this! Thanks a lot!

[@jcx2bby]

You are welcome. Good luck!

[@cevinstube]

Finally, the Elast belt installed the correct way!! Thank you.

[@tabbuattire4327]

Thank you for this video, took a bit to align the holes again but I rotated the crank a little more and it aligned. Wanted to make sure I could screw the E12s in by hand to avoid cross threading 👍🏽👍🏽👍🏽👍🏽👍🏽

[@jcx2bby]

@@tabbuattire4327 congrats on getting it done!

[@ChiefGonzales12776]

I am going to replace the serpentine belt so figured I would replace the AC belt as well. Thank you, this clears up a lot of questions I had for the installation. Thank you and God bless.

[@jcx2bby]

No sweat, glad you found it useful! Good luck

[@emersonmuyco9245]

I have e70 x5 diesel. thank you sir for doing this vid. Much appreciation.

[@jcx2bby]

Thank you for taking the time to comment

[@ValuableShort]

I'm stuck, the screws wont align correctly? What should I do? I got the new belt installed. Thx

[@jcx2bby]

You will get it. Keep moving the pulley around, or use a small punch to align the holes. You got this!

[@ValuableShort]

@@jcx2bby Should i loosen it back up again, align it with a punch and then tighten it?

[@jcx2bby]

@@ValuableShort you can try that. I would probably use a small screwdriver or punch to align it before doing that though. And start a bolt in another hole.

[@ValuableShort]

@@jcx2bby just tried that but when it snaps back into place it slides just a hair off. Would it help to remove the new belt and then align it and then reinstall the belt you think? Thanks for your help!

[@ValuableShort]

@@jcx2bby Got it....thanks for your help!

[@danielmin3726]

Thank you. Good video.

[@bigwill6492]

Thank you, very helpful video

[@johnnow1]

For the E12, to open you do counter clockwise?

[@jcx2bby]

Yes. Normal threads, counter clockwise

[@johnnow1]

Can someone confirm its the same tools with E70 (2009 X5)?

[@christophergano757]

Thank you for making and posting this video!

[@jcx2bby]

No prob Chris, I'm glad you found it in the swamp of KZbin.

[@azpitbull]

What size ratchet are you using? 1/2 in or 3/8? I have limited tools. Can you please recommend what length extensions to use?

[@jcx2bby]

It is a 1/2 inch ratchet from harbor freight. Get a set of extensions if you can. 1, 3 and 6 inch at least. But if you only get one, the 3 inch is the best all around size imho. You could even get 2x 3inch extensions and stack them up if you wanted.

[@bmw_5_bmw_5_44]

alright, that easy. Same for the S63b44? on ista how i read it was much more difficult then I thought, so the pulley gets back and stretches the belt? I am going to change on my s63 engine now how I saw you change that out so easy. Thanks mate 😁

[@jcx2bby]

I would assume the procedure on the s63 is the same, but I don't know for sure. It should be very obvious when you get in there and have a look if that front pulley on the crank looks the same or not. Report back and let us know, and thanks for commenting

[@user-do6ur6su3y]

Absolutely the same procedure for S63 engine since the pulley and belt are identical

[@jcx2bby]

That is good info, thank you

[@mikimiki195]

Great video thanks for making it. But you have to admit it’s pretty ingenious design damn Germans did it again.

[@jcx2bby]

Once you know how it works, it is easy and impressive. I agree. Thanks for taking the time to comment

[@mikimiki195]

@@jcx2bby no problem great diy videos always deserve 👍🏻 and comment. People take their time to make video, least we can do is like and comment.

[@ginolevino]

Would it be easier to get access to it from the bottom or is removing the fan the best approach?

[@jcx2bby]

I wouldn't say it would be easier at all. It might be possible, but that fan shroud is still going to get in your way. Plus there is a metal bar of some kind that runs along the front of the engine (can't remember if it is a swaybar or what) that will thwart your every move. Possible, maybe. Easier, probably not.

[@ginolevino]

@@jcx2bby thanks for the info!

[@jcx2bby]

@@ginolevino no sweat, good luck with your repairs. Taking the fan out really isn't too bad....it's worth it to have that new belt on and not pay $$$$ for bmw to do it.

[@ginolevino]

@@jcx2bby changed both belts today in my F12. It's a little bit different to get in there, but the steps are all the same. Glad I watched your video, thanks again!

[@jcx2bby]

@@ginolevino nice! Congrats on a job well done! Thank you for taking the time to comment here.

[@MsSheikh111]

Good video thanks 😊

[@jcx2bby]

Thank you Muwafaq

[@shawntran9454]

Thank you!

[@Vannyvann7420]

Thank you this helpful tip!

[@joecastro23]

Do you leave the car in neutral?

[@jcx2bby]

No. Park is fine

[@gzman1]

ty u prob just saved me 2 grand, where can I send u money if it works?

[@jcx2bby]

Haha, save your money friend. Glad you found the video useful.

[@martymeyer4125]

well done sir, well done!

[@jcx2bby]

Thanks Marty.

[@juliocesar2513]

Thank you bro!!!!

[@MT-cr1to]

Great video!

[@jcx2bby]

Thank you ❤️!

[@orhysb]

This video made all the difference in getting the work done. All those other stretch belt video omg!! Once again thank you very much!

[@jcx2bby]

Lol, I know what you mean. Thanks for taking the time to comment.

[@billyowusu48]

Helpful video. Even ista was useless lol

[@jcx2bby]

Why thank you bill. Glad you took the time to comment.

[@matreyia]

Man, you see those shade tree mechanic guys trying to jerry rig this installation with a damn broom stick? It's so irresponsible of them to be doing shit like that. I will be tackling this tomorrow but I will have none of the top stuff or water pump removed so we will see how the hell I am going to film this. Will post on the bmwchannel soon. Wish me luck. I haven't seen any videos on how to do this correctly like this one so kudos.

[@jcx2bby]

Yeah I think i saw the video you're referencing....SMH. Sad. I think that if you remove the electric fan and accessory drove belt, you should have 'some' access to get to it. I do wish you luck and will be waiting for your vid.

[@billyowusu48]

Helpful video. Even ista was useless lol