2014 and 2015 Ram 6.7 liter diesel fuel filter and oil change due message resetting

[@paulg444]

He is one of the very best !!.. only Marion comes close.

[@zachmichaelg]

Just a couple notes for some models, in particular the 2014 Ram 5500. This one doesn't have the "confirm" screen. It only uses the re-set and then changes percentages. Also, on at least the Fuel Filter percentage screen, apparently they didn't have enough screen space for it to read "100 %", so after you do the re-set, it will read "10 %", then after you drive it a short distance, it will read "99 %" and then it will do it's normal count down the more you drive. Great video Motor City Mechanic. We'll keep watching them!

[@MotorCityMechanic]

Your absolutely correct Zach. They made some changes over time. I appreciate the comment and added info. Have a great weekend

[@robertr3470]

Thank you so much for taking the time to make this video!!

[@MotorCityMechanic]

Your welcome and thanks for watching it! Dont forget to subscribe.

[@melissacrable796]

I changed the fuel filters on my 2015 dodge diesel, reset the fuel filter life, it reset the % to 99 but the bar is still on change. Love your videos BTW!

[@miked4837]

Great videos very helpful with a 2015 dodge 5500

[@MotorCityMechanic]

+Mike D Thanks Mike! Glad the videos were helpful. I appreciate you watching. Don't forget the share the videos with others so that it can help them as well. Thanks again Mike!

[@TomSommer]

Oh I did. thanks

[@MotorCityMechanic]

Tom Sommer no...thank you sir

[@rubennavarro452]

Thanks!!

[@cal-sparkle2052]

THANKS GREAT INFO, SAVED ME $400 !!!!

[@MotorCityMechanic]

Now thats some money saved! Plus you learned more about your vehicle. Thanks for commenting and make sure to subscribe.

[@TomSommer]

Thanks for the video. I'm getting ready to buy the Dodge 3500 diesel and I am looking around to see what the maintenance is going to be. Thanks again.

[@MotorCityMechanic]

+Tom Sommer Thanks Tom. I appreciate you watching and for the comment. Make sure to subscribe!

[@TomSommer]

Is there a egr cooler service for the Dodge 6.7 cummings? Thanks Tom

[@MotorCityMechanic]

Tom Sommer Afternoon Tom....I need to know the year of the truck. Its different for each year. Let me know and I will reply back

[@TomSommer]

I'm looking at the 2015 or 2016

[@MotorCityMechanic]

Tom Sommer Hey there Tom.....checked and only service needed (of the 3) at 67,500 miles is just he crankcase filter.....the cooler and egr cleaning will not be needed.

[@donhardisty933]

Hi Dave, I have a 2012 Ram 2500 6.7. After an oil change and doing a reset, the oil service light comes on again at 3500 miles. After a reset it then comes on at 6000 miles when I then do a service. Can you explain why the light comes on at the 3500 mile mark? Thanks for all your instructional videos.

[@waylandwilson9752]

Great information and demonstration as well. Thank you for the video.

[@MotorCityMechanic]

Your welcome and thanks for the comment and for watching as well. Dont forget to subscribe!

[@virgilrivera2958]

How you doing buddy I watch the majority of your videos I'm having some issues I have a 2016 Dodge Ram 5500 with a 6-7 Cummins motor in it I did all the services all the filters and even the death fuel injector cleaning put everything back together and now I need to clear the code for the DEF fuel on the dash how do I do that I only have a hundred and forty-one miles left

[@ryanmoore8492]

I have a 2017 Ram 2500 Cummins. I cannot get the fuel filter reminder to reset. Any help would be greatly appreciated.

[@larrydavis5246]

Thanks you our a big help thanks again

[@MotorCityMechanic]

Your welcome,. Appreciate you watching and for the feedback. Make sure to subscribe.

[@metalmanipulator7210]

Helpful video. Thank you.

[@MotorCityMechanic]

hardhatdiver Your welcome. Appreciate the comment. Make sure to subscribe when you get time

[@supperriger]

awesome thank you so much

[@MotorCityMechanic]

+alan speck Your welcome Alan. Make sure to subscribe

[@barryloyd7249]

so the 2015 Ram uses milage not fuel pressure to determine when to change the filters? Also should i replace both filters each time, or just the one in the engine bay? thanks for your videos they are a huge help to me.

[@MotorCityMechanic]

I have never seen it written anywhere but its roughly around the 15,000 mile interval. It could calculate it based on idle times as well but it still seems to fall close to that 15,000 mile mark. When the time comes you need to replace both, they are due at the same time. Thanks for asking and make sure to subscribe.

[@TylerDylan21]

This is not the same on my 2015 Laramie. I tried it but it doesn’t have a reset option

[@freddrickviserboi9432]

thank you for info

[@MotorCityMechanic]

Your welcome

[@JVazquez-e5x]

Like your videos ....Question for you ....I have a ‘14 dodge 2500 with a Cummins, what engine oil do you recommend, delo 400 or rotella t4

[@MotorCityMechanic]

Thanks Juan. I dont see there being a big difference.....Rotella is a great oil that I havent seen issues with. You could go either way in my opinion and not have any problems.

[@JVazquez-e5x]

MotorCity Mechanic thank you !

[@MotorCityMechanic]

@@JVazquez-e5x Your welcome

[@JoseRamos-ln3vy]

Thank you bro bro your videos really help thanks

[@MotorCityMechanic]

Your welcome Jose! Always glad to help. Make sure to check out my other videos and subscribe!

[@supperriger]

but how do ya reset preform services message 2015 3500 6.7

[@MotorCityMechanic]

+alan speck I mention how near the end of the following video: kzbin.info/www/bejne/pqmZYnSkes2mqcU .With the key on......press the brake pedal 2 times and then the gas pedal 2 times.....then key off. Do all these steps in less then 10 seconds. Sometimes you may need to try it multiple times until it resets. Thanks for the question and make sure to subscribe

[@haleiwahi27]

How can reset the Perform Service message on 2007 dodge 6.7 diesel?

[@MotorCityMechanic]

Morning Todd.......turn the key on, press and release the brake pedal two times and then the throttle two times....then turn the hey off. You may need to do this a few times until it reset finally.

[@haleiwahi27]

yeah, I tried that in random sequences but so far, nothing has worked. I tried as you said above, then tried holding down the throttle as I turned off the key, then reversed the order then tried 3 times each all within a 5 second time period then in a 10 second time period. So far the message still comes on. I thought you might know of another pattern I hadn't tried.

[@marscrawler]

thanks men

[@MotorCityMechanic]

+Neil Kott Your welcome. Any time

[@Thevon1962]

Hey David, just wondering if it’s ok to use 5w-30 synthetic instead of 15W-40. There doesn’t seem to be a lot of 15W-40 synthetic out there. I have a 2012 2500 diesel. Thanks.

[@MotorCityMechanic]

Its highly recommended to stay with the 15w-40 and never use the 5w-30. In case where the temp is below 0'f.....5w-40 synthetic can be used. But most likely your not in that part of the world. The normal 15w-40 is perfect and no expensive oil is needed. We no issues related to oil so changing to a different weight or an expensive oil is not justified and for the most part....a waste of money. Thanks for the question and make sure to subscribe

[@Workingcockers]

Hey Dave, love your videos. I'm a long time Cummins owner and just upgraded to a 2017 Ram 3500. I've been using mostly Amsoil 15W40 but recently switched to Valvoline Synthetic Blue 5W40. It's endorsed by Cummins and I understand that is what these trucks come new from the factory with. Is this correct?

[@freddrickviserboi9432]

how to get message off of a 2012 dodge ram turbo cummins? Saying my exhaust is 90% full

[@MotorCityMechanic]

That message will require one of a few things possibly. First I need to know if the check engine light is on. There could be an issue causing this to happen. If no check engine light then I recommend driving it at freeway speeds for a long distance until it starts to count down and then the message eventually goes away.

[@jorgevega238]

Do any of you know how to reset FUEL FILTER on a 2017 4500 dodge. NOT THE SAME AS 2016 AND OLDER.

[@MotorCityMechanic]

Email me at [e-mail] and I will email you the info. The service info pretty much shows to be very close to the 2016 and older versions.

[@drivenlawncare3229]

I have a 2016 and it won't reset any tips

[@MotorCityMechanic]

I havent seen any issues. The steps are exactly the same for your year model. Nothing has changed as far as the procedure.

[@drivenlawncare3229]

MotorCity Mechanic thanks for the reply it finally reset by tapping the right button not holding it

[@MotorCityMechanic]

Cool, thanks for the info and glad it turned out well in the end.

[@markgilley4176]

Can you do a youtube on resetting the system on a 2009 dodge diesel,

[@MotorCityMechanic]

What are you wanting to reset? The "Perform Maintenance" message?

[@markgilley4176]

Yes sir

[@MotorCityMechanic]

Here are the steps: PERFORM SERVICE INDICATOR - RESET The “Perform Service” message will display on the EVIC each time you turn the ignition switch to the ON/RUN position to indicate a emission maintenance is required. To reset the “Perform Service” indicator system (after performing the scheduled maintenance) refer to the following procedure: 1. Turn the ignition switch to the ON position (Do not start engine). 2. Press and release the brake pedal two times. 3. Fully depress the accelerator pedal slowly two times within 10 seconds. 4. Turn the ignition switch to the OFF/LOCK position.

[@josealbertoromeroramirez2597]

In spanish plis

[@freddrickviserboi9432]

The engine light is on

[@MotorCityMechanic]

I recommend getting the codes checked. You can visit your local auto parts store and they will be welling to do that for you....as long as you dont live in California. Once you get the codes....let me know what they are and I will try to help further.

[@Aventurero2004]

💯👍🏻

[@MotorCityMechanic]

+Aventurero2004 Thanks for watching the video. Don't forget to subscribe