2014 Buick Enclave AC recharge.

This is a video overview on the recharge process for the 2014 Buick Enclave. If your AC is blowing cool air, but does not feel as cool as it should this is way you can ensure you are getting peak performance.
Link to my website. HTTP://edgadventure.com/
Here is a short video I made on how to replace the battery on my 2014 Buick Enclave. • Battery replacement 20...
Video about what to think about when getting new tires. • It is time to buy new ...
Link to a video on the boat trailer I built from a harbor freight trailer. • Harbor Freight Boat Tr...

[@andremarshall5011]

Good video.... only problem that I have is you failed to show what the psi on your gauge should read when you were done charging......

[@everydayguy.5580]

@andremarshall5011 I intentionally left that out, because your pressure is dependent upon the outside temperature. The pressure you are at when it is 90out side will be different that when ti is 70 out.

[@timayscott8450]

You almost froze your peepee off😂

[@machetepanda966]

My can has only one hose. No clue whats going on in this video or if I can even use my can.

[@everydayguy.5580]

You only need a low side connection to recharge. I have the professional gages so I always connect the high side so I can see those pressures as well. This will tell you if your system is functioning properly, but simply recharging the low side is all you need.

[@machetepanda966]

@@everydayguy.5580 Ok. Was mad at my autozone for a second there. thanks.

[@Cnutrun]

This just further reinforces my anger at Buick. Will never buy anything again from GM. Had to take the front wheel off to replace a headlight 🤬

[@everydayguy.5580]

I can feel your frustration. I had to replace a head light on mine as well. it was quite the eye opener when I had to take the wheel well off as you mentioned. When I replace the other side I will make a video about it as well.

[@DanKirchner5150]

DONT get the BITE !🥶

[@everydayguy.5580]

Good reminder to wear gloves when working with any liquefied gasses.

[@JamesMoore-dq5cr]

You are being smart you never mentioned your target you're not very much help if you don't mention the target

[@everydayguy.5580]

I intentionally did not state the target pressure. The reason for that is because the temperature outside determines the pressure. So there is no one pressure.