2014 Chevy Malibu P069E Fuel Pump Control Module Request Also U0284 code and P059F code

[@RoyRoss-v5g]

Thank you very much!!!! that was exactly what was wrong with mine

[@jayhutcheson3044]

Ty man makes sense y my engine light came.on after deer crashed from bumper my 2016 Colorado shutter all busted up..

[@mecanicodecristo]

tengo un malibu con ese problema lo revisare gracias por el video.

[@oluwabiyi30]

From Houston tx. 2015 lacrosse same code furl pump module. I need a mechanic that can help me using your method

[@SonNguyen-xw1yl]

Hi I have a 2014 Cadillac CTs 2.0 with I know it missing the active grill so I went to junk yard bought one put on it move I have code p1011 and p069e I clean MAF p1011 gone now I still have p069e. Do I need to check the shutter again? Or it is now is fuel control module issue. Thank

[@danielscustoms13]

Relearn de new grill with a scan tool after repair, then check your throttle body clean and learn the correct position with a scan tool if the fail persists replace your throttle body!!

[@mantislew]

It worked perfect!

[@courtneygaston3709]

I got a used one from the junkyard what are the two can I use or what do I need to reprogram it

[@danielscustoms13]

Just plug and play!! And relearn procedure.

[@colinlindgren5105]

My friends dad accidentally ripped the bumper off and I had to remove the shutter for a few days because the brackets broke..... Now its reinstalled but the fuel pump module requested MIL is still there.... Everything works fine but i cant get the code to clear.... Do i need a bidirectional scanner to perform a relearn or something because the vehicle runs fine has no issues at all besides that code.... Ty in advance!

[@danielscustoms13]

Yes you right, you need a scan tool with the function to relearn the grill, and double check the connectors because it's probably that you forgot connect once of these connectors !!

[@danielstephens4420]

Whats a good cheap scanner that has relearn grill feature? I'm getting the same code when I just replaced grill assembly with motor. It had a sticker on it that said it needs to be flashed with a scanner ​@danielscustoms13

[@jadengorman985]

I have the same scanner, it won’t let me do the hot functions or active tests.. Do you need a special adapter to plug into OBDll port for it to work?

[@danielscustoms13]

TRY TO COMMUNICATE THROUGH BLUETOOTH WITH THE VCMI YOU MAY HAVE COMMUNICATION PROBLEMS WITH THE MODULE

[@danielscustoms13]

IS THE SAME OBD2 CONNECTOR

[@jadengorman985]

Thank you!!

[@ricardogarcia-us9fu]

Do You know if si possible to disable this feature? My colorado has not the grill shutter due a crash, and My motor losed power due the fuel pump module code.... codes P059f and p069e

[@danielscustoms13]

Ooh but first you need to make a fuel pressure test bro, because that codes(P069E and P059F) it’s looks like you have a real low or high fuel pressure on the system !!

[@ricardogarcia-us9fu]

@@danielscustoms13 but when I check the fuel pump module in the computer I only receive the air shutter failure, I checked and the lost of power is a kind of protection due the air shutter

[@ricardogarcia-us9fu]

I live in a really hot area so I am not going to use this grill that is why I won;t buy it

[@gustavobaena1444]

I have the same problem. Did you resolve it ?

[@fmmotorsfleetservicesllc4610]

What kind or model autell system are you using

[@danielscustoms13]

Autel MaxiSYS Ultra

[@Kayyos79]

Hey, I have the P0013 code as well as the P069E and P0101 codes. Could they all be connected, like one is setting the others off?

[@danielscustoms13]

Pay attention on your MAF sensor probably this is the issue on your car !! Refer to P0101

[@Kayyos79]

@@danielscustoms13 thanks, I will start there first.

[@SonNguyen-xw1yl]

Hi I have a 2014 Cadillac CTs 2.0 with I know it missing the active grill so I went to junk yard bought one put on it move I have code p1011 and p069e I clean MAF p1011 gone now I still have p069e. Do I need to check the shutter again? Or it is now is fuel control module issue. Thank

[@courtneygaston3709]

I got the same issue so can I just see if my plug unhooked it and plug it back up I don't have a scanner or nothing

[@danielscustoms13]

Yeah 👍🏼 and double check is the actuator is working properly Up to down!!

[@RafaelFlores-t1f]

So the active grille shutter caused the p069e code

[@danielscustoms13]

@@RafaelFlores-t1f yes

[@RafaelFlores-t1f]

Thanks brother that explains why it runs fine I do have a fault in my air shutter

[@jesusloa1614]

what's the model of the scanner?

[@danielscustoms13]

AUTEL ULTRA