2014 Citroen C4 Grand Picasso 1.6L Diesel Clutch Replacement

07376369067
www.williamsmobileclutch.co.uk
Support the channel and Donate:
www.paypal.com/donate?hosted_...

[@wepipe]

To do this task SO professionally AND film it all for our EDUCATION !! Your a STAR !!! RESPECT !!!!

[@donaldisrael7147]

Another fine example of engineering. Oh, engineers don't do repairs. Great job Kevin.

[@WMCS]

😆😁😂.., These engineers really went to town with the battery design especially on this one ..

[@johnblackburn7673]

Hard work in the freezing cold and rain. Merry Christmas you deserve one.. and hopefully we will all have a better year in 2021

[@WMCS]

John thank you for the support. It’s really appreciated and god bless your 2021 as well.

[@beejott]

I had the pleasure of "maintaining" a C4GP for a few years, i know the "french" solutions. After watching your video, I'm sure, that if I had clutch problems with that car, I would have burned it down. Should we ever have problems with the rotation of the earth, we will call you, you will fix it. Great craftsmanship, my respect...

[@WMCS]

😆😂.., Honestly you’d think these engineers at Peugeot came out of a Soviet Union era military school to please Stalin by inflicting pain on the rest of us with these design.

[@alessandrocamedda1503]

Eccezionale !!! Lavoro perfetto in condizioni estreme 👍👍👍 Farlo senza ponte elevatore è un'impresa da pochi..bravissimo👍👍👍

[@user-dw6jt8rb8v]

Dear Kevin, you did well ... I feel pleasure when I see your work ... I thank you for your efforts in photography and montage, in addition to fatigue in your work, and all of that is your goal to spread the information .... Really, you are wonderful ... I am from Iraq and I follow you

[@WMCS]

Thanks for the support. You’ve got it right ., it’s to share so other people can do it themselves., I’m glad you could see the point of the videos

[@user-dw6jt8rb8v]

@@WMCS You are a very good and wonderful person, Yakevin. Thank you very mu

[@adriandukes7690]

Merry Christmas Kev and thanks for sharing your jobs with us all

[@WMCS]

Adrian thank you for the support and nothing but the best for you in 2021 as well.

[@louky650]

Very impressive, what a great business model! I'm in the US, so I bet a much higher percentage of automatics. I love watching the assuredness and economy of movement of the mechanic. Do one thing but do it well!

[@WMCS]

Thanks for taking time to leave us a review and visiting the channel .,, as a business it has worked efficiently for the past 8 years ...

[@dashooting6595]

Unbelievable job Kevin, couldn’t stop watching. Great job and perfectly filmed aswell for our education. Definitely following 👌

[@washingtonluna9395]

Excelente video y eso que todavia no lo termine de ver, muy buena calidad, buenas tomas y muy bun paso a paso. Felicitaciones y gracias.

[@blowduke]

Your such a hard worker ,not much light this time of year mate have a great Christmas and a happy new year ..look forward to more vids next year ..👍

[@WMCS]

Shaun thanks for supporting the channel and some great feedbacks. Hope the new year brings nothing but the best for you and family as well. Stay tuned as always.

[@vaux_wolf4281]

Merry Christmas & all the best for the new year Kev to you and your family 🍺

[@WMCS]

Thank you .,, Your support for the channel has been greatly appreciated. Wishing nothing but the best of 2021 for your year ahead too .,,

[@loicaoustin1896]

Thank you very much for your very good video! I had to change my clutch in emergency,it was easier thanks to you! For car with left steering wheel (I'm french), don't forget to remove the screw of the steering column. Concerning oil, I put initialy 1.9l of motul motyl Gear 75w80. Gear was difficult to change. I change later for total Gear 8: much more better. Concerning quantity, gearbox with fins needs only 1.9 L.

[@marinkhan3066]

Bro I really appreciated ur hard work . Whenever I am replacing a gearbox or clutch first I check it in ur videos how to do it then I start the work . once again thank you very very much

[@WMCS]

Thanks for supporting the channel. And really glad to hear the videos are coming in handy.

[@hmongmeskas7445]

Good job 👍 thank you for your time teach us how to fix car. God bless you and your family.

[@immerplusmacher7337]

I just finished mine successfully. Wouldn't have tried that epic project without your great video. Awesome job!!! THANK YOU VERY MUCH. 🤩

[@WMCS]

Thanks for the feedback..much appreciated

[@caraudiosolutions]

Great work Kevin, It's not easy working in the rain, cold and dark..

[@WMCS]

The heavens kept opening up in the end.

[@caraudiosolutions]

@@WMCS I noticed.

[@sinanmehmet2038]

Great job as always Nice to see they have revised the dpf set up! The older 1.6 hdi engine's involved removing the dpf completely to gain access to the bell housing bolt Enjoying watching these thanks again 😊

[@WMCS]

A lot of them still requires the DPF to be removed.., but there’s always ways around it.

[@sinanmehmet2038]

@@WMCS true! Your a great mechanic and I love watching you videos Here's one for you I had to replace the clutch and flywheel on a peugeot 206 1.6 hdi a few weeks back that one bolt that was behind the dpf gave me hell no matter what I tried it was front bumper off, rad pack and dpf totally crazy for one bolt, a few people said cut it off but I like to put it back together as I took it apart You ever done one of those? Any tips would be greatly appreciated Thanks

[@WMCS]

Yes. I believe there’s one in the channel. I’d you browse through the videos of actual repairs. How I tackle it is to very slightly bend down the DPF bracket. So I can get a ring spanner to crack off the bolt. Then I undo it as I pull the gearbox out. Hope that helps.

[@leeanastassi]

Just crack the bolt off with a spanner, undo the rest of the bolts and grind it off, easy

[@mikeberry304]

Another great job done Kevin,happy Christmas and have a great new year, stay safe and take care 👍👍👍

[@WMCS]

Thanks for your support of the channel and and all the great feedbacks. Wishing nothing but the best out of 2021 for you as well. 🍻

[@davidnelson5900]

great mechanic--- thanks kev I have one of these cars thank you for showing us how to do it brilliant

[@WMCS]

Thanks for the feedback David. They’re not too bad really. Apart from the battery and the back starter motor bolt.

[@davidnelson5900]

@@WMCS why is the back starter motor bolt difficult to get to Kev??

[@petemechanic8249]

I hope santa got you a new battery for your impact kev😅 merry Christmas and have a great new year. Looking forward to see what content the channel will bring in 2021

[@WMCS]

Pete hope you had a great Christmas and the new year ahead is a good one for you too. I didn’t leave the milk 🥛 and mince pies 🥧 by the front door. So Santa flew straight by ..,

[@freddyan1]

muy buen trabajo felicitaciones desde montevideo uruguay

[@111kco111]

well bugger me Xmas has come early for me, I was praying that you would do one on this car. nice one Kev.. Merry Christmas

[@WMCS]

Ain’t that a chance🎁.,, glad you’re tuning in .,, and merry Christmas 🎄 and a prosperous new year ahead 🍻🍻

[@DodgeCity111]

You took the words right outa my mouth. Thanks Kevin and Merry Christmas 🤶

[@noahsilvaegyp9293]

Eres un crack felicitaciones todavía no termino de ver el vídeo y te doy un 10

[@0Enterprise0]

Great job and complicated, I would not find where to put the screws again in case I knew which ones to remove, well I just congratulate you on this great manual work, now that everything is disposable, I would not get under the car with the trestles, give me the feeling that one day there could be a failure and fall.

[@WMCS]

Carlos that’s the French designs for us mere mortals 😁

[@drexxore]

Awesome video as always dude!! Apologies I haven’t commented in a while but I have still been watching!! Hope your and your family have a marvellous Christmas and new year!! Keep safe dude!

[@WMCS]

Dread thanks for supporting the channel over the years and for all the feedbacks. Hope you have nothing but the best out of 2021 🍻

[@frankbellamy9405]

Thanks Kev for your answer up till 4am watching your vids I done clutches in 70s lot younger then thanks freind

[@WMCS]

Frank it’s always great to hear from a fellow mechanic from back in the day .,, Hope watching the vids brings back some great memories for you., although these engines nowadays are evolving faster than we can think.

[@Jack_JJS]

Great video man, have a good Christmas Jack 🤟🏻

[@WMCS]

Thanks for the support as always. Merry Christmas and happy New Year.

[@castrolgtx5064]

Fantastic video Kevin big thumbs up 👍 👍 Happy Christmas 🎄 all the best for 2021.

[@WMCS]

Thanks for your support of the channel and all the feedbacks. Hope you’ve had a great Christmas and wish nothing but the best for your year ahead. God bless.

[@kacho404]

All my respect my friend, great job finished even ending at night !!! :)

[@StaneAnzicek]

zelo razumljiv prikaz vašega dela, čestitam

[@WMCS]

Thank you

[@izanami6345]

Hello Kevin I am french and i follow you, you are the best ,the operation is identical on the c4 picasso 1.6hdi 2010 Thanks so much

[@franzylevrai]

Merci encore pour tes vidéos Kevin.😉👍 C'est un régal de te visionner. 🙏

[@djamalos3776]

عمل ممتاز اتقان في العمل والتصوير شكرا

[@alanworkman2938]

What a pig. Designed by committee. Half wanted torks half wanted bolts. Says a lot about the quality of maintenance when you have to beat the wheel off with a hammer. Merry Christmas to the hardest working bloke on KZbin. Stay safe and we will see you in the spring.

[@WMCS]

Alan I often wonder why myself. Why so many variants sizes. That’s why I’m a fan of VAG engines/gearbox. You only need 3 size sockets to do the whole repair.

[@paulSmith-yg9fs]

Must be time for the compilation video. Kevin`s Greatest lifts. I think it would be your most watched video. Keep up the good work mate.

[@WMCS]

Thanks Paul. Really appreciate the support..,

[@ethandax8900]

InstaBlaster.

[@alessandrer3616]

The best mechanic in UK ! Thanks for sharing ! Respect man ! Have a good day boss !

[@WMCS]

Thanks as always. Your support means a lot for our channel

[@alessandrer3616]

@@WMCS Hi, I've been watching all of your videos since you started posting on KZbin. I learned a lot from you and in this way I thank you very much for everything you do. I respect and appreciate you very much. I am always looking forward to posting something new to watch with great pleasure. I'm following you from Italy to Venice. Happy Holidays to you and your family Kevin !

[@WMCS]

Thank you and happy new year to you and your family too ..,

[@maxthecaddy8451]

that did not look fun to do what a job, more nuts and bolts than the Titanic, excellent job buddy -- big thumbs up👍

[@WMCS]

Max the real time including filming on this one was a solid 8.5 hours ., I thought it was a great end to the year as it‘s winter., wet, Dark and cold., these are the best elements I operate in ...

[@jeremiahkemp4647]

Great video, just done mine here you make it look so easy 👍👍

[@gegwen7440]

What sadist at Citroen decided to put the battery in that position, great work (understatement) yet again Mr Williams and another lucky customer getting you to sort his vehicle.

[@WMCS]

😆😁.,, there’s the battery and the bolt behind the catalytic converter. Some real twisted engineers back at Citroen., I agree with you completely But sure was a funny comment tho 😂

[@gregdelasavoie2105]

Hi my friend the "Clutchinator" this car is so complicated....you are a samouraï... respect to toi💪👏🤙😉😉

[@WMCS]

Hi Gregos.,it definitely was a long repair this one. But still a nice repair. Hope you’re keeping well.

[@gregdelasavoie2105]

@@WMCS ❤️😉💪👍

[@pcgrey69]

Happy Christmas Kevin Albert Williams

[@WMCS]

Merry Christmas 🎄 to you too and a prosperous new year ahead. 🍻

[@Andyspeeder7]

Mucker what a fookin baw buster that battery box was Nice job 👍 👍

[@ianfleming2866]

Mines gonna need doing i would think been slipping intermittently in 5th & 6th when under load. When i spoke to garage they said they are one of the worst clutches to do and was quoted £1400 quid. Had another quote by another garage and it comes in at just under a grand. Great video seeing what’s needed to go into replacing one

[@WMCS]

It’s definitely a bit of a long repair if ever you’re in need of a price don’t hesitate to contact us www.williamsmobileclutch.co.uk

[@sailingachilles7810]

How many miles was on yours when started to fail? Mines at 40k and and a 1.6hdi and takes ages some times for auto to change gear and heavy on fuel now to

[@istvansarusi-kiss3259]

Good job,great video...Thank You.

[@iphotohpi]

Great video Kevin. What's the make / size of trim clip removal tool you use at about 2:26 in to remove the wheel arch liner clips?

[@1971carmichael]

i found this video theraputic lol woman will never understand well done kevin good job...ill be doing the clutch sometime on my c3 picasso...kinda looking forward to it lol.

[@WMCS]

Let us know how you get on 🍻🍻🍻

[@1971carmichael]

@@WMCS had a mechanic friend round today just mentioned about my c3 clutch pedal hit floor and no clutch...when i broke down car towed to garage nearby..they said total clutch refit near 1000 pounds..i refused got it towed back..mate just checked it and clutch is fine its the master slave cylinder that connects to pedal at fault..is there a special proceedure on bleeding master and slave on bell housing..mine has the 2 clip only on lower cylinder bell housing...angry i could have been duped quite easily if i had a no worry money attitude

[@jmc216]

​ @Kevin-Albert Williams , Thanks for the video, you did a great job !!! great skills and knowledge. I have a C4 Grand Picasso 16. HDI 112hp with EGS (semi auto) The gear box is manual actuated by a EGS. Do you know if I will have space enough to replace the clutch and the fly-wheel mass with the EGS installed? I mean following similar steps than this video... Any extra precaution that I should take when I will change the fly wheel? Thanks in advance JMC

[@immerplusmacher7337]

Have you succeeded the same way with EGS regarding the limited space? Planning to do so with mine and wonder the same question....?

[@johnkidd4822]

well done .i spent 36 years fixing cars and bikes .... making a living . snow rain ice. at to do it. never had the gear you have. All ball and pin.a labour of love. i new a lad ow would put a clutch in any car. for £25 .now he drives wagons .

[@WMCS]

John much respect to you. It must have been a lot tougher back then. New clothing technology makes it a lot more bearable to work outside now and plus the little comfort like padded mats and heater.

[@sl8844]

Szép munka ügyes vagy !

[@craigwarner8639]

Thanks for the video fella, great instruction so that I could take it on my own. You must have some arms on you shifting the gearbox as easily as you did.

[@WMCS]

Drop us a message if ever you need some advice whilst doing it on the day. 🍻

[@craigwarner8639]

@@WMCS managed to do it this week, worst bit getting the arch liners and under tray off as all of the fixing were knackered and spinning. Would have taken me forever to find that top bolt on the starter motor without the video so thanks once again!

[@tonymassemin9173]

Très bonne vidéo bien détaillé

[@alexarka2852]

Hi Kevin , une question ? est-ce obliger de serrer le volant moteur au couple ? Super boulot you have gold hands !

[@paulbidwell6713]

Excellent work Kevin , Merry Christmas mate.

[@romadape1389]

good job without a doubt.

[@jrog757]

Super film!!!!

[@braptechfun6036]

I always wish all the best, to the engineer who put that one bolt behind the dpf/cat on a 1.6 PSA engine... best of luck to him.

[@WMCS]

Tell me about it. It’s spilled onto the Ford and mini as well. All use the same engine.

[@robertwilliams-mc9et]

great video very in formative i will definitely subscribe.a1 man ace.

[@WMCS]

Thank you. I think you should to honour the Williams surname legacy 😁😎🍻🍻

[@MacMiguer]

Congratulations for your videos!! Could you tell me how to loosen the plastic screw that hold the guide of the cables of the gearbox?? Goes half turn or thread?? 33:40 Thanks and regards from Spain.

[@avantime91]

Super boulot 👍🙏

[@drewlingard4483]

Great Video 👍🏽is much different for the Auto one?

[@dannystacey9583]

Merry christmas !! Kevin

[@WMCS]

Thank you Danny and a happy new year ahead .,, thanks for your support to the channel.

[@kevinspratt4535]

Excellent video.

[@mart43]

have a happy and health christmis Kevin Albert Williams! and a happy new year

[@WMCS]

Thank you and merry Christmas 🎄 to you and thanks for supporting the channel., very much appreciated.

[@bartmen597]

Hello, very good tutorial, thank you, how much gearbox oil should I put in? There is no other place to put it? There are other models that underneath the battery have a vent for the box and it fills up there, it doesn't. You, what did you put it for the reversing sensor? Thank you so much

[@WMCS]

Thankyou.

[@lucianbolo9756]

Merry Christmas!!!

[@WMCS]

To you as well Lucian..

[@rafaelbarcelosf]

The best!!!

[@theo931ful]

Bitte komm nach Deutschland, da gibt's viele Kupplungen. Good Job

[@krzysiekm1641]

Er war schon da gewessen aber euer Ordnungsamt, Gesundheitsamt und Handwerkskammer halbes seines Lohn haben wolle 😁

[@mig7287]

Merry Christmas.🎅🎉🎊

[@WMCS]

Merry Christmas 🎄 and happy new year. Thanks for supporting the channel.

[@doganaydogan1178]

Hello Kevin, I have a 2009 model Grand Picasso 1.6 Hdi with MCP semi automatic gearbox. I will change the cluth 2nd time, last time I used Sachs. However, I want to try Valeo which seems fit according to factroy fit list. Would you suggest to do so? The reasons are it is %40 cheaper and it feels more solid, the flywheel doesn't move as much as sachs's product. It would affect the driving experience in a positive way. I just presume.

[@dustysweeper]

Thanks for the video. 👍

[@sudinebabz8651]

👍🏽super ! It was a very long job !

[@WMCS]

Merci beaucoup et joyeux Noel 🎄🎄

[@sudinebabz8651]

@@WMCS merci à toi ! Joyeux Noel you too✨🌲👍🏽

[@eugenniculae5832]

Just subscribed! Great videos! May I ask you what torque/speed settings are you using on your impact gun and for what type of jobs?

[@WMCS]

Thanks for supporting the channel. I’m always adjusting the torque setting via my phone app. But it goes up to 1400nm. But in general. There’s are the settings I use. 200nm 150nm 50nm

[@eugenniculae5832]

@@WMCS thank you!

[@lprc7196]

Were you topping up the gear oil in the side above the driveshaft?

[@frankbellamy9405]

Great vids Kevin you some grafter and perfect pictures from camera what camera do you use thank you

[@WMCS]

Thanks for the support Frank .., I’m using an old GoPro 4.,, they don’t do them anymore. It’s the size of a matchbox.

[@doogee6385]

Real professional 💯

[@user-zi6nm6cv2s]

Hi, in this video you install the clutch different position than the installation on Peugeot 3008. Here you install it in reverse. I have a 407 1.6hdi and which is the right direction? Been confused because both of the cars that you upload the clutch change have the same engine.

[@josebanunez9750]

Buenos días Kevin, tengo un citroen C4 automático de 12 años, desde hace cuatro meses, cuando estoy parado en un semaforo, el coche se me para y se apaga todo el cuadro de mandos, luego lo arranco y funciona bien, el reloj se pone a 00,00, como si hubiese quitado la batería, la batería está bien, sabes de que puede ser? Gracias

[@jimbax1]

Nice one Kev! thanks!

[@WMCS]

James thanks for the support.

[@mikefedele4521]

Here in Canada the manual transmission is going the way of the doh doh... Curious... Do mechanics out your way follow a flat rate system? I like the line up tool you use. Where can I get one?

[@WMCS]

I charge per job.

[@BartV-kg8bx]

Hi Kevin, do you need to lower the subframe to get the job done ? or was it just to get the drain plug out ? need to know to do the job as my car is similar. Cheers

[@WMCS]

Ideally yes. It’ll make life a lot easier. I’ve re updated this repair on channel video log. Look in comment sections for it.

[@legrandmanietout2450]

Cluctch killer is back , good job from france . At my opinion Citroen engineers have never thinking to remove the battery

[@WMCS]

Raccoon .,, the battery removal itself was half the job 😁✨

[@pfauniversal1890]

Nice work

[@vincenthamel4221]

Bon boulot !! Et tu as ton compte professionnel ou fait tu ça sur ton temps libre 👍?

[@justabloke6981]

Great work. I've just bought one of these with a reported clutch/flywheel change less than 10k miles ago. There is a rattle when depressing the clutch on gear changes. Any thoughts on the cause? Do you get over as far as Great Yarmouth? Cheers

[@_Just_Some1]

Thinking of getting one of these. Are you happy with the C4 Grand Picasso 1.6L Diesel so far? Any thing you think I should look for? Thanks for your time.

[@oktay242]

Can you give me spare part numbers for comparison? Did you buy everything as a set or individually? My C4 has run 85000 km. Do you think it makes sense to swap the dual mass flywheel at the same time? best regards

[@francis102271]

Hi Kevin hope you got had a good Christmas really enjoy watching your videos no easy task ripping out clutches on the ground keep up the great work 👍 quick question astra h 1.7 diesel do you need to lower the subframe completely our can I just do what you have done with the 1.3 astra h and lower it down and then wedge a lump of timber cheers

[@WMCS]

Same thing., almost identical. I have a 1.7 after new year if you can wait that long I’ll film the repair. Otherwise more than happy to point you in the right direction.

[@francis102271]

@@WMCS doing repair in next few days im a HGV mechanic by trade but I do bits on cars and vans but never done a clutch on one of these yet lol yes the advice would really be appreciated do I need to drop full subframe thanks again 😀

[@WMCS]

Only partially .., you’ll have plenty of room to take the clutch and Fly out. You don’t even need to touch the starter motor and it’s bolts. Subframe gearbox side all bolts out and drop link. Driver’s side slacken about 1/3 of the way out.

[@francis102271]

Thanks for the advice really appreciate it 🙏 do I need to remove passenger side drive shaft our will it pull with the box cheers 🍻

[@farid8374]

👍👍👍👍 magnifique 💪💪

[@nasariqbal3100]

Good job bro

[@karlmaxweber]

Is it same process to change 2016 Picasso's clutch?

[@Edgarh71]

Does it not have a self-adjusting clutch, on which you have to compress the spring in the pressure plate before tightening it to the fly-wheel? I believe my C3 Picasso from 2010 has it.

[@WMCS]

It’s a self adjusting clutch. But I’ve never heard or had to compress any springs. Not even for a C3. All you have to do is press the clutch pedal after installation like shown in the video and that’s how it adjusts itself. And as you drive over time and keep pressing the pedal as the clutch plate wears down the auto adjuster keeps releasing so there’s always tension on the clutch system. Hope that helps.

[@jmc216]

@@WMCS great video, many thanks for your efforts. One question. My car is a C4 grand picasso 1.6hdi egs system... therefore, I dont have clutch pedal. Will self adjusted after drive a bit? I will need to plug the diagnosis tool to calibrate the gearbox? thanks in advance

[@christophercrocker5191]

Just came across the video, very insightful 👌 what kind of labour hours are involved for a job like this??

[@WMCS]

Book time on this one about 9hrs. But out here about 7hrs

[@suratullahkhan6158]

Do you do also the one that is automatic gear box c4?

[@MikeVogel12]

Which degreaser/cleaner is used in that pressure sprayer? U always use to clean the gearboxes and block with in your videos. Looking for a good solution like that. What a hell of a job this one pffff hats off

[@WMCS]

Hi Mike. I normally use brake cleaner as I buy it in 5L tins. But any solvent works just as good.

[@Adicarr]

Good job 👍💪🍻

[@chahidabdelmjid5653]

Chapeau a great job,bravo. why don't you use the torque wrench?

[@WMCS]

You should always use a torque wrench if unsure. My personal answer is I do these every single day. A bit like you learn how to drive but when you pass your test over time you develop a knowing instinct.

[@quent682]

Beau travaille

[@WMCS]

Merci beaucoup ..

[@extasynord]

Hi, can you please, tell me how much oil need for gearbox?

[@petitdavid7691]

how long does it take you to change a clutch and flywheel on a 2013 Citroën C4 Picasso 2 please?

[@andrelaurent812]

bonjour es ce bien un véhicule automatique avec palette au volant sur la video.merci