How to replace the torque motor mount & Hydraulic Mount on a 2014 Nissan Altima
Пікірлер: 93
@dominiquevidal39122 жыл бұрын
Watched most of these videos and everybody be cuttin half the video out. U the only one that actually explains it
@canaryrose332 жыл бұрын
Nissan wanted to charge me $900 to replace passenger motor mount, I came to this video to see if I can do it myself. I may break a few nails but it's worth a shot! Thanks!
@whypaydiy2 жыл бұрын
You can do it
@SuperArmintiesto Жыл бұрын
Why labors charges high in the US?
@justustampoc6 ай бұрын
Just followed along with your video and my car doesn't shake or make a whining noise anymore!! Thanks brother, I much appreciate you!
@whypaydiy6 ай бұрын
Your welcome
@UnknownPubStomper9 ай бұрын
My passenger side I can feel vibration and I’m pretty sure it’s the same mounts, gonna try it out appreciate this video a ton man gonna follow ur exact steps
@Carpenter1778 ай бұрын
Heads-up: At the 14:17 mark it is IMPOSSIBLE to push the black tubing/pipe/line (power steering fluid return) forward unless you remove the bolt from the plate it is attached to - which secures it to the strut tower. You don't have to remove the lower screw/bolt - just the one in the top corner. Trace the black pipe/line forward toward the windshield and you will see what I am talking about. Motor Mount torque specs can be found on bigdog50001 automotive video - the specs are the same for pre2013. Thanks for the video! Enjoy.
@ferboy186 күн бұрын
Thank you very much man, you got me out of trouble 🙂
@hulong0205 Жыл бұрын
Nice job man. Especially how you maneuvered those bolt and Mount out. Will save lots of time. 👍🏼
@whypaydiy Жыл бұрын
Thanks bro
@chatoperez739 ай бұрын
well done amigo I just did it the same but on the big mount the nut just spin with the screw :( I just left it rest but it won't come out thanks for the good detail video bro. from San Diego CA
@whypaydiy9 ай бұрын
Your welcome bro
@dancadigan173710 ай бұрын
The larger mount is actually two pieces pressed together. There are two dowels that are pressed in to form these into one piece. I very carefully drilled these out for the new part and the part in the car after i removed all of the bolts so i could get drill bit on these. So much easier to remove and replace in two pieces. After all torqued in place, runs like new without any vibration. Choose to do that at your own risk
@P_double_H7 ай бұрын
This video is a gem.. thank you so much!!! Everything clearly explained. Kudos to you brother!
@whypaydiy7 ай бұрын
Your welcome
@kccodex8931 Жыл бұрын
Nice video, watching you go through the process gives me the confidence to go ahead with my own, I always watch the vids in case there's some kind of snag, special tool needed, et cetera. Thanks!
@whypaydiy Жыл бұрын
You can do it
@packmantrey2938 Жыл бұрын
did you end up doing it yourself
@kccodex8931 Жыл бұрын
@@packmantrey2938 I did, it was easy, no hang ups, it was 9 months ago so I forgot the details, I vaguely remember making a point of keeping track of different bolt lengths. I think I had to carefully bend some AC pipe.The mount on the bottom was a different animal, I had bought a kit that came with two mounts, and was going to replace both, but gave up on the bottom mount when I figured out I would need about a 4 foot extension, half inch drive, to access the bolt, from the wheelwell, to basically the center of the car. Maybe there's a easy way to get at it, with enough leverage , but I couldn't find it.
@mo7mmdnoo737 Жыл бұрын
Thanks,, that take a little more time for me, however finally i did it my self god bless you 🙏🏿
@whypaydiy Жыл бұрын
Awesome
@PhantomRavn3 жыл бұрын
I hope you remembered to put that strut bolt back on, thanks for the video👍
@albertojhernandez1698 ай бұрын
I'll be do this plus the valve cover soon. Nice video
@hypetekauto3 жыл бұрын
Helped out a lot , thanks ! Keep doing what u doing
@gulygoo608 Жыл бұрын
Excellent video man, thank you, im getting into thisnsame job tmrw and i feel very confident
@whypaydiy Жыл бұрын
Happy I could help man, you can do it
@gulygoo608 Жыл бұрын
@@whypaydiy yea buddy, I got those two and the transmission mount in, in less than 3 hrs. The big one was a pain to get out, but thank you again
@SicilianSVT Жыл бұрын
I was gonna say you have to partially remove the strut tower bar to get that top bolt out. And you also have to support the engine with a jack because the bracket next to that mount needs to be removed as well. I have done this motor mount replaced and its not as easy as it looks
@5thGenMaxi6 ай бұрын
This video helped a lot man, thank you.
@whypaydiy6 ай бұрын
Your welcome
@vinces.28622 жыл бұрын
Very good ... Thank you. I need to replace the valve cover on my 2015 2.5L Altima which I have no problem doing. Just needed to see the procedure for the motor mount bracket on top of the engine. If you're interested the Torque for the 18mm is 76 FTLB and the 16mm I believe are 36 FTLB. Please correct me if I'm wrong. Thanks again.
@smartcookie35008 ай бұрын
That's a good brother. Excellent camera work sis. Thank you for the upload! 👍
@whypaydiy8 ай бұрын
Thanks bro
@chargerchargers79683 жыл бұрын
Great video man.Will appreciate if I can get those part numbers from you..again that was a very helpful video,detailed, looks easy...👍
@whypaydiy3 жыл бұрын
Part 1AEEK00799
@rlgonzalez048 ай бұрын
Solid work, thanks for the tutorial.
@ricardooconnor2362 Жыл бұрын
Yaady!! Yeah mon. I am Jamaica too but it’s funny hearing his pronunciation of certain words. (Nephew/torque etc).
@ricardoherrerarivas93942 жыл бұрын
My car got a rattling on passenger side area. It was same engine mount. Thanks my man
@whypaydiy2 жыл бұрын
Most welcome bro
@juniorundersea Жыл бұрын
man i was today hours trying to pull the upper mount and i was afraid to brake the power steering hose while forcing it ,and i see you here pushing it back so easy . ,end of story i bolted again the old mount ,i will try again other day .
@whypaydiy Жыл бұрын
Yah jis try again i gave all instructions
@tuanle-sv8jk6 ай бұрын
You can trace the power steering hose back to the strut tower and unscrew only the top screw which will loosen the Power steering hose. Also, you might need to remove the Engine Torque mount to create more room. The 2nd silver hose has a screw underneath which can be loosen. Let me know if this works out for you.
@juniorundersea6 ай бұрын
@@whypaydiy thanks
@juniorundersea6 ай бұрын
@@tuanle-sv8jk thanks very much
@nel29012 жыл бұрын
Very helpful bro. Thanks for uploading it
@whypaydiy2 жыл бұрын
Your welcome
@crysmeserve5395 Жыл бұрын
Thank you so much! I can do it now.
@whypaydiy Жыл бұрын
Most welcome
@gubgub082 жыл бұрын
Thanks bro, very helpful 💯💯💯
@cop25063 жыл бұрын
Hey, thanks for the video. Helped
@hectorrivero6700 Жыл бұрын
Nice & easy broo
@whypaydiy Жыл бұрын
Thank you
@Bartetmedia2 жыл бұрын
Thanks, good job!
@felsig14 жыл бұрын
thank you for the diy
@firasabaas2 жыл бұрын
Thanks
@Dldnxb10 ай бұрын
Ótimo vídeo
@whypaydiy10 ай бұрын
Gracias
@gilly25712 жыл бұрын
Nice job! Anyone know what the extra bolt holes are for under the engine cover? Not the holes for the bolts that hold the cover
@patrickmayers4431 Жыл бұрын
Nissan sometimes uses the same engine in different models. Might also be needed for a different part to be installed there. Could even be used as a part of the manufacturing process. So, you know, reasons.
@Covkdkd3 жыл бұрын
Thanks for the video. I would like to know that Parts number. Could you let me know that?
@whypaydiy3 жыл бұрын
Part 1AEEK00799
@NerfBlitchs3 жыл бұрын
Thank you for this video
@whypaydiy3 жыл бұрын
Your welcome
@krisnickfffs Жыл бұрын
Dude! To get that top plate off I had to remove that plastic piece in front of the windshield and in order to remove that you have to remove the windshield wipers... I had to remove windshield wipers to get to the motor mount 🤣
@whypaydiy Жыл бұрын
Dude, why didn't you watch the vid .....all that is extra work bro 🤣
@brianbaker3593 жыл бұрын
Excellent video, great camera work. How much is that job at a dealer, parts & labour?
@whypaydiy3 жыл бұрын
About $500
@canaryrose332 жыл бұрын
Nissan wanted to charge me $900
@markshipley560 Жыл бұрын
@@whypaydiy $900 plus at the dealer in Dallas as of December '22
@whypaydiy Жыл бұрын
@@markshipley560 wow, best to buy the parts and invest in tools
@markshipley560 Жыл бұрын
@@whypaydiy I did the two passenger side motor mounts on my wife's car today in about two and a half hours. I loosened the power steering pump and the bracket holding the AC lines. I wasn't comfortable being that forceful moving them out of the way to get the lower mount out. Not only did I save almost $900 my wife thinks I'm a hero! 🤣😎
@albertocastro5240 Жыл бұрын
Me gusta el video
@dominiquevidal39122 жыл бұрын
Preciate u man. Really helped out me n my brotha 🤟
@whypaydiy2 жыл бұрын
Anytime man
@joshjones94074 жыл бұрын
Was it making any rattling noises an or vibrating ? Mine has a rattle from passenger side area an vibration at idle in drive
@whypaydiy4 жыл бұрын
Not rattling but your engine will vibrate in excess. What you can do to see if its me mounts have some one sit in ur car and u look at the engine, then ask the them to shit to drive and reverse. If you mount is gone you will see the shift in the engine ba k and forth.
@arsalan38893 жыл бұрын
@@whypaydiy do you know if the vibration at 1800rpm in 2013 altima is because of this torque mount? Also how many miles were on it when replaced?
@whypaydiy3 жыл бұрын
@@arsalan3889 it can be you can look at it to see if it is burst or damage. About 110k
@DJSPYDYINC3 жыл бұрын
Where do i place the wood on the bottom so i dont damage the pan?
@whypaydiy3 жыл бұрын
Just make sure is a block of board that fully covers the area. You are not jacking it up much so it won't damage anything.
@DJSPYDYINC3 жыл бұрын
@@whypaydiy thank you brotha
@kels7780 Жыл бұрын
Can that one engine mount cause the whole engine to shake
@whypaydiy Жыл бұрын
Yes, u can see which mount is bad too by having someone Rev the car while u look at the engine. Also, have them shift between drive and reverse.
@lijaijohny7284 жыл бұрын
I got Nissan altima 2.5sl engine shaft changed due to oil leak, within a week I got problem with my car vibration n noise on passenger side. Can u help me if I should tk my vehicle to Nissan service center or 3rd party service center?
@lebronad24394 жыл бұрын
I have the same issue vibration is only coming from passenger side. Did u figure out how to fix on your car?
@lijaijohny7284 жыл бұрын
@@lebronad2439 I also had vibration on my steering and I went to a workshop were thy had ask me to change my engine mount , after changing the mount thr were no sign of vibration anymore .
@whypaydiy3 жыл бұрын
Well it all depends on who you are most comfortable with. I would take it to a alignment stand first as they can tell you if any things is bad, like mounts or front-end parts
@montellanopg4 жыл бұрын
Did the vibration go away?
@whypaydiy4 жыл бұрын
Yes
@John214tx4 жыл бұрын
You know ur a bad mechanic when u forget to put a two bolts back the black frame was not secure back together lmao