2014 RAM 1500 Wheel Spacer Install How To

Real time of me throwing some cheaper eBay wheel spacers on my truck. " How to" if you want to call it that!

[@romom.2879]

Dude kept it entertaining throughout the whole video! 👍👍

[@mcdanielweldingcustomfabri6168]

Dude have a hell of a personality but that's what's going to build your channel to grow even larger 🤣🤷🏽‍♂️💯

[@concaveeruption8266]

U have jus literally succeeded your very first horizontal 1 inch lift! congratulations!! Great video!

[@89scarscomedy17]

Dude I subscribed to your channel because of ur commentary lol, it's the best all the way real.

[@griffsgarage6028]

Lmao that really means a lot! I appreciate it, buddy!

[@jonny555ive]

Ok, you are definitely my kind of dude. Beer drinkin, fukk sayin, throw caution to the wind and let the chips fall where they may. You, brother have a new subscriber 🤘🤘 That's some good sh!t right there.

[@keithlinzemann8603]

Great video my friend definitely entertaining

[@patlarentz6500]

Beatoffable. 😂 I liked that. If you get 1.5" spacers, watch your stud length. It's close. Mine stuck past the spacer 1/16 - 1/8 of an inch and didn't realize it till my back wheel almost fell off. I recommend 2" to be safe when you get em.

[@firstbitefishing135]

Did you cut the studs?

[@rickv92cMountaineers]

Awesome, got the same $ tree phone holder. Still helps me decide if I should do this myself. thanks

[@milkdudd6758]

Great video brotha, you answered all my questions 👍👍👍👍👍

[@sytian808]

“You just did what to what” I laugh to hard at that

[@kolbyencinas]

I like your channel, its pretty cool. I recently bought the same spacers, are you having any problems with them? Do you regret putting them on there?

[@griffsgarage6028]

No issues to speak of and no regrets! They are easy enough to take back off if you have regrets haha. Thanks for watching!!

[@revstor]

Truck yeah!

[@user-beingme]

Great video 👌

[@cockballs420]

Loved it man! 👌🏻

[@chrismontes6978]

This video was fuckin awesome. Thanks

[@bobbyb608]

How did you install the vehicle lift? Concrete anchors, then leveling nuts, then set the lift on it?

[@griffsgarage6028]

I eyeballed where I wanted it, measured and squared it in place, outlined the bases with chalk, then drilled some holes, pounded some anchors in, then used shims that came with the lift to level the posts, torqued it down.

[@jeffshultz3883]

LOL! New York Gold!!

[@jonny555ive]

Do you feel any difference in your turn radius ? Does it drive any different that you can tell ?

[@brown5252]

1:05 mass of hairball....🥸🥸🥸

[@tommiefisher9525]

Some of the rams look like they have spacers from the factory.....my 2016 bought used and wheels stick out like yours......went to change a flat and was surprised to find it didnt have spacers.

[@griffsgarage6028]

My old '11 RAM had chrome clad rims and kinda looked like it with no spacers.. Tires were one size bigger though also so maybe that was the illusion

[@tommiefisher9525]

@@griffsgarage6028 possible.......they definitely stick out past the fenders but it's like an inch

[@wazzybeatz]

I'm not about to take notes from a guy that uses anti sieze on wheel studs... you do the exact opposite and put locktight on the lugs that mount the spacer... it's even right in the instructions 😅

[@griffsgarage6028]

Lmao do what you want

[@kolbyencinas]

Did you have trouble with the 9/16-18 lug fitting with the impact wrench?

[@griffsgarage6028]

My socket fit right in there

[@nathanbrown7909]

What size level are you running front and back?

[@canik5384]

This guy is so funny

[@guspena5403]

Any update bud? Still working good?

[@griffsgarage6028]

Still rocking them no issues!

[@edfoster6189]

Did you run 35’s on it after the wheel spacers ?

[@griffsgarage6028]

No 35's....I'm stuffing 37's on it here soon! Keep an eye out for that video

[@griffsgarage6028]

No 37's this time around!

[@knucle01]

👊🏻💥

[@billgreen4003]

Cool 😎

[@marcusmccomb1789]

Are you rubbing a leveling kit or a lift on your truck?

[@griffsgarage6028]

Homemade level lift. Check out my video on that.

[@jasonsosa69]

How does it handle at high speeds?

[@griffsgarage6028]

Depends on road conditions really.

[@kendrixburriss2121]

Didn’t see in the video but did you have to shave down your factory studs? Do they stick out past the spacer ?

[@griffsgarage6028]

I didn't have to do anything but slap them on!

[@dwightschuette8960]

Soon as the camera stops rolling puts it back into 4 cylinder mode.

[@griffsgarage6028]

Absolutely not. It's become second nature to keep on all 8 all the time. Until I upload a tune and won't have to worry about it

[@MereSkink]

Possible to have a link to the spacers?

[@griffsgarage6028]

eBay seller is 1stpower-tech 1.5" hubcentric spacers 12-18 Ram's 6061 T6 billet aerospace aluminum

[@kyledowns3236]

Does yours wobble at speeds around 60?

[@griffsgarage6028]

Check your CV shafts. I bet they are worn out

[@sheldonbrown4855]

How to say I like warped rotors without saying I like warped rotors

[@griffsgarage6028]

Still have the factory rotors on!! 120k miles, no issues.

[@Chaserdetails]

what exhaust is that?

[@griffsgarage6028]

It's a GriffCustom exhaust lol here's the vid kzbin.info/www/bejne/g3y8dmd4d72jfrM

[@danielashe5265]

Well how they holding up ? And do you have a link to the ones you purchased ?

[@griffsgarage6028]

www.ebay.com/itm/153331300803 are the EXACT ones I purchased. I have over 5k miles of work truck use on them and not a single issue! Only thing I will say is that they do change the ride quality. I can feel grooves and other imperfections in the roads more through the steering wheel. I will make a follow up video soon as I am doing some other work to the truck!

[@beastrod00]

What lift u got bro

[@griffsgarage6028]

Homemade 3.5"

[@robertpinedajr4846]

😎💯👍👍

[@griffsgarage6028]

kzbin.info/www/bejne/g3y8dmd4d72jfrM Link to my homemade level lift

[@dennislewis7602]

Nah. Not meaner! My vw golf looks mean 😂. Cambered and bagged looks way better!😂😂😂😂 I guess I’ll keep my dodge factory 😂😂😂

[@johnsenate2214]

Need at least 2”

[@griffsgarage6028]

That's what she said

[@billgreen4003]

Cool levatation device

[@antonyperinis3134]

Tread lock on vehicle studs not anti seize !

[@griffsgarage6028]

No. I like to be able to get the lugs back off. Loctite is for bolts you don't want to come out. You loctite your caliper bolts too? Lmao 🤣

[@jordanmjustice]

Idk bout the red thread lock they use i might use blue if I was going to use some

[@titotorrezn]

hello what are the measurements?

[@griffsgarage6028]

5x5.5x 1.5" hub centric spacers

[@titotorrezn]

and where did you buy them friend?

[@mikecopenhaver4484]

Why, it’s illegal!!

[@griffsgarage6028]

OHHHNOOOOOO 🤣👍

[@TheRealNolanStyles]

Waste of money and not an upgrade

[@griffsgarage6028]

Thanks for watching!

[@austinparish821]

Any problems with them since install?

[@griffsgarage6028]

No issues whatsoever!