2015 2016 Honda Fit LED Pillar Tail Lights Installation

[@armandoramos1949]

This is a great idea, I dunno why Honda didn't do this from factory. Thanks for sharing.

[@heyX3smoketreeserday]

I installed mine today. Mine is a 2015 and the lights I got were $60 from AliExpress. Your tutorial was accurate. I soldered my wires together.

[@pico1991]

Hey man, I just wanted to say thank you. I followed your steps to the T and everything worked out great. Appreciate you making this video and describing in detail things like which colour wires to splice; etc. Saved me a lot of time looking up wiring harnesses and whatnot.

[@myc0p]

6:08 Why not use top brake light wire that is already installed in the hatch?

[@jekyllhyde374]

Thank you for this video you helped a lot of us that lack foreign language.

[@derekthornhill9197]

Wouldn't it be easier to connect the brake wire to the 3rd brake light in the hatch rather than running it all the way down to the lower lights?🤷‍♂️ Installing in a friend's fit this weekend and doing research. Picked a set up for $45!

[@DefinitelyNotMyRealName]

I tapped the brake and tail wires on the left side of the hatch in the rubber loom. Easy.

[@natricjol]

What wires did you tap to do that? I used the license plate lights for one set but I still need to do the brake lights.

[@prashanttimmapur9101]

There was not need to run red wire all the way down sir. You could have just tapped it to blue wire when you removed the runner grommet at 6:33.i have done same and working pretty fine

[@stopmeansstop3788]

Why no run it to the third brake light on upper faring?

[@mocky1220]

Hello. Do you know how to change the cup holder light? Mine is glowing blue which I think is kinda useless. I want to change it if its even worth the while. Thanks.

[@prashanttimmapur9101]

Is it possible to tap third brake light in the top center instead of tapping tail light wire ??

[@Burgers2990]

Hi. You didn't break any clips?

[@claytonsilva4591]

Quero saber pq essa lanterna não vem com lampada de fábrica??

[@heyX3smoketreeserday]

Very helpful. You should make a hood ass autotune track called "what I did".

[@janorvillesolis6925]

did you connect the left and right tailights before tapping to the brake lights?

[@ronsantellano1406]

Rather then tapping into each taillight I ran one wire from a brake light and tap into the new pillar lights. Now that I look at it, it might have been better to run the wire from the Pillar light to each taillight.

[@natsusenpai3930]

Thank you!

[@d.i.y.hondajazzgk5.376]

Thankyou

[@lucasmunoz2365]

I'm still confused on how to do this. I want them to stay on not just when I use my breaks and what does it mean to tap into the motor and licences plate light?

[@derekthornhill9197]

The white wire is the running light which can be connected to the license plate light wire. The *Brake light wire is red and can be connected to the 3rd brake light wire in the hatch.

[@BilloBob1231]

Don't mess with your car