2015+ / 2019 F150 Emblem Painting / Disassembly / Gluing - DIY

[@edwardmills4985]

Nice work man

[@acalltoarms1087]

ProTip: when drilling anything plastic, especially a shallow hole, run your drill in reverse. It might take a hair longer but the bit won’t bite and you’ll end up with a perfectly smooth hole

[@ericmelo9731]

Your hard lesson will save alot of people headaches. Ensure you have the right orientation . I also glued mine from the back where I drilled out the rivets using JB weld

[@TheSparkleCompanyChicago]

I really appreciate the detail. I know people like short videos now but I like the amount of detail you put into it. Thank you! I’m doing this for a customer and I’m going to paint it and bling it out with crystals ❤️😘

[@BenZellerZellerRemodeling]

Thank you! Saved me lots of $ and time. Instead of using a dremel I used a box knife to pop the rivets on the outer oval.

[@BruthaVIII]

mr G: "Honey, come look and see how good my Ford emblem turned out." Wife: "Yes, that looks great. Good job, Sweetheart. But what the hell happened to the folding trays on our Smoker?!"

[@iamgarrettlyons]

Lol 😆 the paint has since came off. But my wife wouldn't notice anyways 🤣🤣🤣🤣

[@tjbugs1]

I don't know anything about a dremel other than I own one. Brilliant! Thanks for the informative video

[@jdhaas4231]

Damn thats a lot of work. Love your Aussies. I believe there are some decals out there that accomplish the same thing. I'm going to look into that option first. I just cringed when you painted on your grill, yikes! Thanks for the tutorial.

[@willie9397]

hey ford you see this? looks great

[@focusman365]

Awesome color! If you give them a light sand before you paint they won't peel like that. 👍

[@jsco8692]

I know this is an older video. Ford/ Dog guy so just checking in on the K9s. Really cute

[@iamgarrettlyons]

They are great. Turning 5 and 4 this year! :D

[@stephenbritto1808]

Great video. Could you please mention the different paint cans you used in this?

[@dragonrider9051]

Took all day but completed and looking sharp!!

[@jonathanlucero1428]

Where can I buy one like that for my 2019 ? Without the plastic on the side that’ll fit ?

[@ProCharged377LX]

Looks good man!!! Thanks for the video

[@NeemorsWorld]

How is the paint holding up? I just did mine today and it’s drying.

[@iamgarrettlyons]

Very well. The only negative thing is very tiny rock chips on the front but the back looks as good as the day I did it.

[@andrewsaunders1796]

Looks good buddy.

[@EMTHEKING881EZWAY]

Where do u get those emblem I been looking but my say size 9.45

[@iamgarrettlyons]

pop it off your truck or ford dealership

[@Monster1211]

It looks like a nice place to paint but make sure if you're in an area like me (in Los Angeles) you have some kind of protection from dust and bugs!!!

[@iamgarrettlyons]

I'm in south Alabama but I was in my closed garage. Good enough for a home project lol

[@BALL_BUZZ]

They already sell these though in the exact color you did yours and their cheap. Why not just go get one of those?

[@mygt8a4re]

Who is they? Only one's I can find in a pair are $250-$300!

[@timrandall4659]

Should have showed it on the truck. Want to see how close of a match it was. Good tutorial tho. Wish it was around 6 years ago when I did mine...

[@xaviermarquez1045]

You think it's the same process for the 2007 Ford explorer emblem?

[@thatbluebugguy3455]

Did you ever get around to the side emblems, and if so, how hard were they to do?

[@iamgarrettlyons]

They were a pain in the dick to get off. You need to get a razor and cut the glue and then push from the inside and pull at the same time while pushing the clips in..

[@thatbluebugguy3455]

@@iamgarrettlyons tip for getting emblem glue off, use dental floss, they have small abrasives that wont damage your paint, but cut through badge glue like butter

[@iamgarrettlyons]

@@thatbluebugguy3455 yeah; I tried 3 different floss. They all broke. I used a heat gun to warm glue up, left it alone, tried it all lol I ended up using 12lb fishing line and a straight razor. Was an absolute pain in my side to get off.

[@NeemorsWorld]

mr G I parked mine in the sun for a few hours and they came off like butter.

[@samwinzenburg8103]

Looks great!

[@danielr5565]

you didn't have to sand the chrome down??

[@iamgarrettlyons]

I should have. On my newest updated one I did.

[@danielr5565]

@@iamgarrettlyons I have a 2008 ford f250, do you know if all ford emblems are in 2 or 3 pieces??

[@crekview43]

Great video man, was this for the front or rear emblem on your F150?

[@iamgarrettlyons]

Both. I did front and back!

[@codyagler5902]

Did the tailgate emblem come apart the same as the front grill emblem?

[@iamgarrettlyons]

Yes it did!

[@FFBoomer519]

Wow no prep, no primer, and junk spray bomb clear coat. Bet these look great a few months down the road.

[@iamgarrettlyons]

so a year or so later, it has held up great. The front was about 85% but a big rock destroyed it into two pieces. I redid it with sanding, etc. Still looks good after several months. First time doing it so relax bro

[@Mark-hu9tf]

Did you think about clear coating it?

[@rfo23]

He did apply a clear coat. One coat.

[@JustinJFilms]

Thank you for the how to

[@oralozcakir]

#amazing

[@bwimHA]

Thank you for the how to. It was informative but, honestly, it could be a 5 minute video. Just some constructive criticism, no offense intended. Thanks again.

[@iamgarrettlyons]

You right. In my head the video making process went different lol next time it'll be short and sweet

[@piratecanada]

thx helped!!!

[@stanngalloway6677]

How do you remove the front badge from a 2015 f150????PLEASE HELP!!!

[@iamgarrettlyons]

On my 2019 you had to take off the front grill and the dampners. Was a pain in the dick to do..

[@brainbiter4267]

Thanks man looks great👍🏼

[@TimApple.]

his spray painting technique makes my eye twitch. watch a video on that

[@iamgarrettlyons]

no it aint that serious

[@jb36066]

4 cans of paint for this ~ not sure it’s cost effective. Turned out nice but it would be taken a minute or less to drape something over it 🤷‍♂️🤦‍♂️

[@Capt_HowdyGT]

how are you gonna just "drape something over it" and paint it 2 different colors lol

[@HectorLopez15]

Not cost effective? Please sit down ma’am

[@TheTomahawk2001]

Reminds of a dentist 😁

[@irrelevant6845]

Can i just mail you mine and you do them? Lol.

[@iamgarrettlyons]

this was the easy part. the hardest part was getting the stupid grill off. lol

[@Hudgens5150]

Fuck that.

[@bradsheppard6407]

ford is ridiculous for making this so complicated. its a damn emblem, not an engine.

[@daveworkman5213]

I guess you've never seen the 10ths running around with half the emblems woren away lol

[@Capt_HowdyGT]

complete disrespect for that grille lol

[@iamgarrettlyons]

Fck that grill boi

[@marvineid3085]

No big deal.

[@andygoulet68]

Note to self: pay someone else to paint ovals.

[@iamgarrettlyons]

hey ill do it for some money lol it's not as hard as it looks. Just takes time!