2015-2022 Chrysler 300 Front Bumper Removal. FASTEST and EASIEST Way

Purchase this Bumper at :
www.revemoto.com/collections/...
This removal and installation works for :
2015 Chrysler 300
2016 Chrysler 300
2017 Chrysler 300
2018 Chrysler 300
2019 Chrysler 300
2020 Chrysler 300
2021 Chrysler 300
2022 Chrysler 300
This is the easiest way to remove that damaged or if you are trying to upgrade your Chrysler 300 Front Bumper.
2015-2022 Chrysler 300 Front bumper Removal :
We'll walk you through how to remove the 2015-2022 Chrysler 300 Front Bumper, so you can do it at home and save money!!
Tools Needed :
Plastic Panel Removal Tool (Optional)
Flathead
Phillips Screw Driver
10MM Socket
7MM Socket
Rachet Set
00:00 - Intro
00:36 Removing Engine Cover
01:36 Pushpins Fender Liner
02:00 10mm Side of Bumper
02:25 7mm Under bumper
03.37 Removing Front Bumper
05:37 Disconnecting Wire harness
07:00 Removing Rivets top of bumper
08:30 Foglight removal
11:00 Grille Removal
16:00 Installing all accessories on New Bumper
Removing the front bumper off a 2015-2022 Chrysler 300 seems hard, but as you can see its super simple. First get a flat head or panel removal to take off the push pins on top of bumper. Go to the side of the bumper and removal the push pins holding the fender liner. Push the fender liner back and you will see a 10mm bolt that is removed by using a 10mm socket with a racket. Do this on the other side also. Underneath the vehicle there is 7mm bolts that run across take those off with a 7mm socket and rachet. Go to the top of the bumper that closest to the fender and pop that top part off. You will need to use some of your muscles to take it off. When you finish doing this on the other side also. Go the side of the bumper with some force pop the side of the bumper off of the bracket it is held on. Do this on the other side also, but support the bumper as it will have a tendency to fall quickly. After you gently pull bumper off and place on ground. Disconnect the wires holding the reflector, fog light and other sensors (if you have them). The Bumper is OFF great job. Follow the rest of the video to learn how to take off the accessories.
Subscribe: kzbin.info?su...
Follow Us on
FB: / revemoto
IG: / revemoto
Twitter: revemoto?lang=en
Tiktok : / revemoto
________________________________________________________
#Chrysler#300#diy #Frontbumper#Chrsyler300accessories#paintedautobodyparts #cars #partsforcars #carparts #Carbumper
DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@DvBlends]

It’s 9:42 pm ima just do this in the morning 😂 now I know what to do

[@ReveMoto]

Haha yeah get some sleep! Easy work for you tomorrow. If you need anything for your car go to www.revemoto.com

[@KeOShAsWoRLd]

OMGGG THANK YOUUU SOOOO MUCH FOR THIS DETAILED VIDEO 🙌🏾🙌🏾🙌🏾

[@ReveMoto]

You are very welcome Glad I could help!!

[@MrBLawson85]

hey bro i need to know what rivets or pushpins you used to connect the top radiator support cover and the bumper

[@damiengarcia6605]

Do you know what part number or connect that is at the 6:40. You disconnected the main harness and I’m trying to figure the part number out . Thank you

[@13xsmith7]

Do you have this bumper WITH the parking sensor holes?

[@ReveMoto]

Yes sir! All the bumper options are listed here: www.revemoto.com/collections/chrysler-300-painted-bumpers/products/2015-chrysler-300-front-bumper-painted but if for any reason you don't see another part you need you can always request it here: www.revemoto.com/pages/painted-parts-request and be happy to get back to you on whether we have it even if it's not listed on the site. Appreciate you watching!

[@ralf8534]

What is the peice that connects the bumper to the hood called ? It has all the caps and screws

[@ReveMoto]

Sup Ralf. Here is the part number 68227211AC. Let me know if you have any questions. Go to www.ReveMoto.com

[@kennethrich1942]

I can not get my bumper to stay snapped into place in front of the tires. I only hear one snap and thats closest to the bolt. Any help with this would be greatly appreciated

[@ReveMoto]

I would check the tabs on the bumper make sure it’s not bent and attaching properly. Another option is to change the bracket. Go to www.ReveMoto.com

[@anabelcrts]

What’s the name of that part that goes in between the bumper and the top grill so it can stay in place? I can’t find it 😊

[@SolomonMansiya]

Impact absorber

[@Abuskii]

Bruh that bumper is so difficult to take apart don't understand why the grille is so secured in

[@ReveMoto]

Seriously I don’t either. They could of just have used clips to hold it in.

[@Abuskii]

@@ReveMoto and don’t get me started on those rivets doesn’t even make any sense

[@amachus2514]

It’s a pain in the ass but I’m a repair man at Chrysler and I can tell you it has to be secure. Mopar bumpers have extremely low tolerances for error. Especially for lane correction sensors and PTS sensors. After-market bumpers are very iffy. Current fascias have to be perfect. Without these secure points there would be flex in the facia. I know the push pins are cheap but their basically one time use only, it’s all plastics going together. Be aware, and use W-40 to help snap in those grills. I learned that from a master trim mechanic.

[@bigbossdre6410]

@@ReveMotol

[@miguelrecendiz2367]

Is this the same for a 2022 chrysler 300s hemi?

[@ReveMoto]

Yes it will be very similar removal process. If you need anything for you car go to www.Revemoto.com

[@fkhowyoufeelaboutit]

4:54 👍🏿

[@user-zo1bv4ih3f]

Hey I need a bumper for my 2015 chrysler 300 an I need it to be black

[@ReveMoto]

Hey there! Sorry for the late reply, you can find the Chrysler 300 painted bumpers here: www.revemoto.com/collections/chrysler-parts/model_300 and we'll actually need to go by paint code, which you can find in the driver side door jam sticker. If you can't find what you need, you can also always request it here: www.revemoto.com/pages/painted-parts-request