2015 Chevy Malibu/Impala Hesitation/Stalling/Engine Power Reduced to 25

P0171/P2097/P0106/P0068/Tighten Gas Cap/Service Stabilitrak (Update 5 bolts on intake)

[@black007die]

YO MAN stop calling yourself an idiot I appreciate you taking the time to shoot a video like this or praises

[@rodneybissell3628]

gerard Thanks Man!, You are Welcome.. “I will not call myself an idiot” “I will not call myself an idiot” “I will not call myself an idiot”🤣🤣🤣

[@douglaaprescotr5709]

Good luck with Chevy

[@rodneybissell3628]

Hahaha Thanks Guys !

[@jasonhull5712]

All that for an intake leak... good find man. That's better than half the techs working at the dealer, and the majority of techs at the random shops !

[@rodneybissell3628]

Thanks Man! Yeah, I know at any given dealership they would have tossed parts at it to try and make the Codes go away.. Cause it’s not a “Common” problem to look for.. Thank You again !

[@01mustang05]

The majority is getting dumber, by design and/or by consequence of generational child abuses, corruption, poisoning, indoctrination, manipulation, extortion, and outright refusal to help stop these practices by all people assuming positions of power and authority over and upon others. I don't know what to do - to get the majority to come to the same conclusion, so we can stop making more of a mess, I just can see where humanity is going wrong.

[@rodneybissell3628]

Sorry about the language everyone.. We made this video after me finding the real problem and I was extremely frustrated with GM and discovering that it wasn’t a Mechanical Failure but a Manufacturing Failure Also GM has yet to make this right with their customers!

[@stevenliberadzki9160]

I have a 2014 2.5 malibu and when the start stop kicks in the cr stalls and doesn't want to restart right away then when it does runs real shitty for a few seconds then smooths out. I did have a code for the exhaust vvt last week so changed it and since no codes at all. Even now when this is happening. I sure hope it's as simple as this to fix it. If it is I owe you a snickers. Good info if it's not the fix. We'll done on the find and hope you knuckles heal.

[@larrydotson2796]

Brand new engine that should not be having these kinds of problems as I say these new cars are garbage

[@shaner5252]

You say the car has 110,000 miles on it, doesn't seem that necessarily means that the bolts were not tightened at the factory, probably more like they needed locktite. 110,000 miles is not a new car. That said, very good find and you sir are a true mechanic, most ASE mechanics can't find a problem if the code reader doesn't tell them which part to replace. I think todays so called mechanics solely rely on the computer to tell them what to do.

[@rodneybissell3628]

@@shaner5252 Thank You, I know what you’re saying.. But this car has never been touched intake wise or even had the cover off the top of the engine.. This is my girls car, She leased new then had too many miles at end of lease so she bought outright.. That said, I however have driven Toyota for the past 35 yrs and when I say 111,000 in Toyota Language thats a trip around the block 😄😄 Speaking of Loctite, I have NEVER used it on any of My Toyotas. Because EVERY bolt has a torque spec, Is why I say GM hasn’t figured it out yet 🤣🤣 But now her car has close to 200,000 on it and ZERO Check Engine Lights. We recently found a problem with the Vent Valve wire that was broken at one of the frame mounts the little “Christmas Tree” plastic stabs that hold wire with a zip tie.. Yeah broken wire there and Had check engine which in turn disables the Remote Start! NOT pleasant in Michigan Winters😡 But, all fixed and she runs Great 👍🏼

[@user-jr2jh5yk8z]

I'm having this problem now. But no codes I almost had a accident because car won't move in intersection

[@liefnielson]

Hey man, appreciate this video a bunch. 2014 Malibu has been causing me a whole lot of trouble for the past 2 months, just trying to figure out what was wrong with it. I was in shock to see that one of the bolts on my intake was loose. You’re a life saver! Thank you man!

[@ajberg2095]

Just bought a 2015 chevy Malibu yesterday, 03/31/23. The guy I bought it from said he had running too rich to lean codes, check engine light on. He threw 02 sensors at it, map sensor and some other things, and no fix. This morning I got on KZbin, and came across your video, I took the cover off along with the intake tube hoping to find 1 or 3 loose bolts and sure enough, ALL 3 intake bolts were backed out! I tightened them up, cleared the code and it seems to be working just fine. Engine light has not came back! Thank you guys very much for making this video. God bless you guys 👍🏽

[@rodneybissell3628]

That is an Awesome Outcome!! Glad we could help, Thank You for the Props 🙏 I bet you got the car for a good Price also. 😁😁 The best repairs are the ones that don’t cost us anything.

[@rodneybissell3628]

Just so you know there should be 5 bolts total (2) more on the bottom ..

[@renaldohayes1010]

@@rodneybissell3628is it easy to get to the 2 bolts on the bottom?

[@guylivesay8330]

​@@rodneybissell3628thanks for the video.......been thru the part$$ replacing thing. Just tightened all 5 bolts and test running now.

[@dancordell1224]

Thank you for the video. My wife has a 2013 Malibu, same 2.5 engine with 71,000 miles. Engine Power Reduced, Stabilitrac Failure etc. Codes from my scan tool started out with the VVT intake solenoid, changed it and ran fine for about 2 blocks. Ran codes again, this time VVT exhaust solenoid, same result, changed and same 2 blocks Engine Power Reduced all lights back on. Ran codes again, this time fuel pressure codes came up, saying either main fuel pump in tank, high pressure pump on engine or fuel pressure regulator. I started with what I thought would be the easiest and ordered the high pressure pump that mounts just beside the throttle body. Man was I wrong lol, that little mother was a pain to change, but got it changed. Cleared the codes with my scan tool, drove it, this time it went almost 3 miles running absolutely perfect. Then boom, Engine Power Reduced, Stabiltrac Failure, all the same issues. Scan tool hooked up again, and it started all over again with VVT intake solenoid, cleared the codes, just started the car and let it run about 2 minutes, all the lights again, cleared the codes again, and fuel codes came up again. S o searched KZbin and found your video, reached straight into the intake and wiggled it, not a ton of movement so didn't think that was the issue, so grabbed a 10mm socket and ratchet, all the intake bolts were tight, top and bottom, except the top center bolt, it was barely finger tight, but with the 2 outside bolts being tight it didn't allow the intake to move like yours in the video does. Called a fellow mechanic who has an AllData account, he looked up the torque specs for me, wish I could remember them now for everyone, but retorqued them all, not a single one was close. Reset the codes, and low and behold, it has ran better than it ever has, even from the day it was bought new. Thank you so much for the video, I've been an ASE certified mechanic over 20 years, and with my tools and Snapon scan tool, can usually fix anything I start on, except this monster lol. Computers and scan tools can't read a loose bolt, and your video I'm sure will help many people, because since fixing the wifes car, I've done 2 more, and my shop buddies have came across at least a half dozen more. Thanks again my friend!!!

[@rodneybissell3628]

Dan Cordell So Glad you were able find the issue with our video, I can only imagine that with only 71,000 Miles it was just the beginning of your issues before it reared its ugly head, Sorry you had to replace all that stuff before the found our Video... What an Amazing description of your issue! We were both pleased that our video helped you solve your issue. Same reason I just kept the code reader hooked up haha Merry Christmas Good Sir

[@gersonmonge3537]

Yessirrrrrrrrrrrrrr

[@matterofpublic782]

My car started doing this yesterday. My husband is ase certified and refused to believe that this was the issue. I pulled it apart and tightened all 5 bolts and runs perfect

[@rodneybissell3628]

Matter of Public info Hahaha,😄😄😄That’s Awesome, Good On You!! Thank You for your input... Can’t wait to show my Girl this Comment🤣🤣

[@brianbuckley7770]

I believe it’s done on purpose so u can bring in to the dealer. Ok if you was to build your own car right you know everything on it is going to be working... nothing loose no wires is exposed it’s a money-making thing... it’s good to take a trade in mechanics I kinda wish I did.

[@rodneybissell3628]

Brian Buckley I believe you’re correct, I wish I knew how to start a class action lawsuit !! And make GM buy this POS back !

[@chhansen9813]

My buddys daughters 2015 impala was having the same problems and they were told by a GM dealership it needed a bunch of stuff and it would cost about $1500. She took it somewhere else and that dude replaced parts costing about $500 and it didnt change anything except her bank account had $500 less in it! I spent HOURS on the internet and then came across your video when I was researching something for one of my cars and I checked her intake bolts on her 2015 impala eco tech 4 banger and the bolts were loose AF! I tightened them and the check engine light went off and the car ran great! Thank you, this is the AWESOMENESS of people on YT helping other people!

[@rodneybissell3628]

THAT is AMAZING!! So glad you found My Video, That is a Beautiful thing when you can solve the problem with No Further Expense, It’s comments like yours that are the most rewarding, Thank You 🙏

[@chhansen9813]

@@rodneybissell3628 You're very welcome!

[@andrewschaible4241]

I have a 2014 Chevy Malibu. Had a lot of the same problems. Car throwing all kinds of codes P0068, P0171 and more I cant remember. The car would bog out at around 30 or 40 mph and stalling a few times. I Replaced sensors and plugs. Still no fix. I checked what you have showed in this video and well the exhaust manifold was loose. Not just loose but very loose. It actually has 7 bolts. 5 at the top and 2 at the bottom. 5 at the top are easy to get to. 1 of the bottoms is easy to. The other one is kind of hard. I had to unplug a sensor and remove the starter to get to it. All back together the car is running fine! Thank you so much from Philly!!

[@rodneybissell3628]

Nicely Done Andrew, But we worked on the Intake Manifold.. I would suppose the Exhaust could throw some Codes as well with the PCM not getting the correct back pressure... Nice Job, I think I will check my girls Exhaust manifold as well just to be Certain, If GM can’t tighten bolds on Thousands & Thousands of Intakes what would make me think they could get anything else right 🤣🤣🤣🤣

[@noco6799]

I found your video while searching around for the codes I received for my 2015 Malibu. Today 1/7/23 I tighten those REALLY LOOSE bolts and problems solved. Thank you very much for this video. It is still helping individuals out like myself & saving lots of time and money. God Bless !

[@rodneybissell3628]

That is Awesome News! Glad We could help you save your sanity 🤣

[@djl7940]

I watched this by accident my Malibu was doing same thing sure nuff my bolts where loose also thank you vary much!!!!

[@rodneybissell3628]

T79 You are Most Welcome!! Be sure to get all 5.. There are 2 more on bottom

[@djl7940]

After I put everything back together test drove it and hit the hwy I haven't felt this car take off so fast makes me wonder if we had this problem when we bought the car it just got worst and worst cant believe the power it has now

[@rodneybissell3628]

T79 Nicely Done Sir! Some accidents happen for a reason 😁😁 We are So Happy this video has helped SO many people. We never would have thought close to 17,000 people would view this because of a similar issue.

[@timhawk4119]

Thanks for the Post that's exactly what happened to my 2014 Chevy Malibu when I unplug the mass air flow sensor my car quit stalling out so I assumed it was the mass air flow when I got a new mass air flow same problem with the car would warm up so I looked at the bolts to the intake and yes they were loose. Usually I don't post comments but your video save me a lot of trouble shooting and headaches thank you for the Post

[@Ojt03]

Never delete this video

[@funjoy0738]

This video is 4 yrs old so in 2019 and that is a 2015 with over a 111 thousand miles? WOW! I wanna say you guys bought it used and it was a rental car before? My cousin has one too and it has some issues but, other than that thank you for the post it came it clutch!

[@rodneybissell3628]

My then girlfriend…Now Wife, Leased this car when it was BRAND NEW in 2015 It had 4 Miles on it when she took delivery of it. When her lease was up, it had too many miles on it so she bought it outright. So No! It was NOT used and it had NEVER had anyone under the hood to do what you’re thinking. That was the First thing I asked her when I found the problem before taking the video.

[@natdawg78]

My 2014 Impala has been throwing all kinds of sensor codes and replacing them had not helped. I bet this is my problem. Thank you!

[@rodneybissell3628]

Easy enough to check it out… Let me know !

[@jarentaylor4721]

Very good video! My wife's car was running like crap and all the dealership said was mass air flow sensor. Replaced that with no results. Watched this video and had her fixed in less than a half hour. Much appreciated!

[@russellthomas7785]

Well, I resisted that your findings were gonna be my problem. My 2015 Malibu was showing all the same signs and throwing same array of codes, including for MAP sensor, MAF sensor, Throttle body positioning sensor. After buying MAF and MAP sensors, and beginning the install job in the driveway, I thought, what the hell....look at the intake manifold mating surface to see if there's any moving when I push on it; and to my amazement, I saw the thing move. Great job guys, and thanks so much for sharing with community owners. Your efforts save me time, frustration and money.

[@charlotteforee5005]

please tell me the final outcome because I swear I'm having the same issue

[@anonymousistay5079]

Sr. Thank you very much!!!!!!! for sharing the solution to your problem!!!!! It was exactly what my 2014 chevy malibu needed "to tighten the intake just like you did in the video" you have solved my problem so again Thank you! and your wife for taking the time to make the video and share it!!!! I'm super happy that my problems with my chevy are finally over.

[@appliancedude63]

3 year update since I watched and followed this advice and my car has never did this again after I followed the advice in this video. This is definitely the solution.

[@rodneybissell3628]

Thank You for your Support ♥️

[@ramey_4332]

Thank u. This was exactly the problem with mine. I had tried everything. GM needs to recall and fix it right

[@rodneybissell3628]

Bob Brem Thanks for the reply. Nice to know we helped at least one person. We searched the internet and found nothing, hence the reason we made this video.

[@ramey_4332]

I tried everything as well. This was the exact problem. I couldn't find anything else. So, thank you!!

[@rodneybissell3628]

Bob Brem Thats AWESOME! Im So Happy to Help, Thank You for your personal Experience 😎

[@joshcourtois9556]

I'm having the same exact problem. Very poor gas mileage. I have the 2015 Chevy Malibu LT EcoBoost someone coming to look at it.

[@ivonnelymartina8136]

Really you help mi . No one cloud fix mine car formi after 2 months I found your video and you help mi

[@andrewschwedland4775]

Thank you guys so much for this video! I never would've found this if it wasn't for you guys!

[@zechs6437]

Thank you so much for this video. My girlfriend's 2015 Malibu was having issues with auto-stop not working and eventually couldn't drive over 30mph. 115k miles on the odometer. P2097 was a confirmed code that popped up, P0106, P0171, and P0324 were pending codes. All three(didn't check the other 2 on the bottom yet) of those bolts on the intake manifold were ridiculously loose and barely held the manifold on. Tightened all the bolts back on (wish I knew what the torque spec was...) and the car has zero issues now. Wondering now if I should put some Loctite Blue on the bolts to prevent them from loosening up again. Also didn't notice that there are 2 extra bolts on the bottom. Looks like I'm gonna have to hit those ASAP. Can't believe GM can get away with selling cars with such stupid issues. Thanks again!

[@rodneybissell3628]

zechs6437 You are Very Welcome 🙏 So glad you found our video! I’m not so sure you can pull bolts out of hole I think they are “Captive” bolts (where they stay in the holes) But don’t quote me on it.. Be sure to tighten the bottom bolts 😊 Thanks Again !

[@LH81633]

Google year make intake bolt tourque spec!!!

[@1662ks]

I saw this video when I first got P0171 & P0297 codes but thought surely it couldn’t be that. Today I got a P0089 code and a sudden reduction of engine power and Stabilitrak warnings along with a complete stall out in traffic. Limped home ripped it apart to check the throttle body, and sure enough, I went to check the manifold and it was hanging on by the last threads. Tightened them and no codes so far. Thanks

[@dennisaguilar9410]

Wow, did I get lucky…… Just came across your video and I found that my intake was loose….. holy moly…. I was hearing a exhaust leak. So thank you a whole bunch.

[@jimvonfeldt1855]

I have same car with po455 code. Canister purge valve needs to be replaced and cant fin where its located. Any info greatly appreciated

[@rodneybissell3628]

Purge Valve is located Passenger Side Near Rear Wheel and you have to drop the Gas Tank on that side to access it. Your Canister Purge Tank is right there connected to the gas tank, Looking up at it you can kind of see how it disengages from the tank, It’s like a triangle wedge that the purge tank drops on to.. Take that off and purge valve is at the top side of your purge tank (It is a Pain in thee Ass!!) Chevrolet doesn’t make ANYTHING simple!! Side Note: Be Certain to buy an OEM Purge Valve I think from the stealership they’re around $37 maybe a little more now with Dipshit in the White House and our “Fabulous”Economy. I think if sealership changes that purge valve it will be over $200 Just an option but if you have a buddy with a Hoist and you can get the car up in the air, It makes life alot easier but doing on the ground isn’t impossible. Hope this helps you Bud !

[@themesshall6001]

Dude you are the man I spent hundreds of dollars on this car and fixed it in 30 mins free cause of your video. Thank you so much for the video 💯🙏

[@rodneybissell3628]

Thank You, Nicely Done!! You are Welcome 🙏

[@derekv7070]

I’ve been working on our 2014 Malibu for a week and changed oil control valve, map sensor, spark plugs, 2 02 sensors, Throttle Body, Intake VVT Solenoid and this was our problem! I couldn’t thank you enough!

[@rodneybissell3628]

Nicely Done Sir! So Glad you found our Video 😊😊

[@robfolks]

Same here. Fixing to check if this the problem once it warms up. Then got to find what's causing it to slowly loose antifreeze.

[@Drewbot16]

I have an impala, its the same motor, replaced all this shit too... not even mad im just glad its fixed 161k and climbing

[@jessethayer8852]

2015 malibu 2.5 110565 miles exact problem thanks eternally.😊

[@mechanicalman8048]

The map sensor is right behind the throttle body on the intake. This video helped a lot. You guys are awesome.

[@rodneybissell3628]

Eric Arias Thank you and also for the info 😁

[@daetronbeverage-sanders5348]

This sounds like a production issue that they should’ve done a recall on. Awesome video btw!

[@rodneybissell3628]

Daetron Sand Yes Sir ! I agree ..

[@rodneybissell3628]

C Hansen If the car stalls while making a left turn and someone dies as a result of it.. We’ll see wont we.. When I’m seeing almost 12,000 Views on a video that I made to help out a “Few” People GM Obviously has a problem they have not corrected, Because I’m told they use that same engine in the Impala and Malibu

[@rodneybissell3628]

C Hansen Sorry, Yeah We’re Cool 😎

[@rodneybissell3628]

C Hansen Unfortunately you are 100% correct

[@robfolks]

Them affirmative action loones are the cause. Ill put money on it.

[@l.o.lworld2110]

Wow 👏😮 You guys definitely broke everything down to ebonics for me This video absolutely helps me in I currently operate at 2013 Chevy Malibu with a 162,000 miles I just received that code. Thankx for quarterbacking such Awesome 📹video for outstanding mechanic work😲😎👀😀!!!..

[@rodneybissell3628]

Thank You So Much ! So Happy this Helped, Have a Blessed Day.

[@daprishayoung3093]

I’m receiving the same code

[@kendalllee6508]

Thank you VERY much for taking the time to post video. My wife has the same year and model was getting P0068, P0171, P2097, P0131. I replaced the MAF sensor, battery, upper and lower O2 sensors and spark plugs. I was ready to get rid of the car but then I started getting the stabilitrak message on the dash and car started powering down. Google led me to this video. I was skeptical that this was my issue but after reading all the comments I was hopeful. Sure enough, same issue. Getting to the screw for the lower clamp was a you know what but after tightening the bolts, the check engine light went off and car runs smooth. I have liked and subscribe as a small token of my appreciation for you posting this video.

[@rodneybissell3628]

That’s Awesome News… Glad to know people are still finding my video helpful, Thank You for your support 😁 God Bless!

[@petermartinez5573]

This is the type of information that will save the next guy/gal a lot of time and money. Thanks for sharing.

[@rodneybissell3628]

Thank You Buddy ! That was our hopes, We have gotten overwhelming responses.. So Glad this has helped several people save time and money 😁

[@danaluce]

You my friend are a Godsend. I've been chasing these sames codes on my Aunt's 109000 mile "15" malibu off and on for a week now. 1st an aftermarket MAP sensor, replaced that with an OEM, still running rough, stalling at stops and reoccurring codes. I just happened to be replacing the front struts for the annual State Inspection and came across you video. Sure enough the intake was extremely loose against the head. All of the intake bolts were loose and 1 had actually fallen out. Car runs properly now and I'm sure this was the issue. I cleared the codes and I'll recheck next weekend. KZbin is an amazing channel at times

[@rodneybissell3628]

You are MOST welcome Sir!! I’m SO Glad you found our Video and You were able to fix the Problem! Which you and close to 600 People have had.. If anyone knows how to start a class action suit, I’m all ears!

[@EmersonHogan-t7n]

Super helpful... I would advise changing the tensioner in... A bad tensioner in a bad belt withdrawal kind

[@noegomez5000]

Thanks so much I already spend so much money and time changing solenoids and sensors and now here's the solution

[@hondamancl450]

Thank you for saving me money because I have the same dam problem what blows my mind 😢

[@chokorollyadventures1958]

2015 Chevrolet Impala LS 2.5, 75,000 + miles. I want to thank you very much guys for this video. After my diagnostic, I was about to change upstream O2 sensor because of P0171 and P0131 codes. The symptoms were that the car felt sluggish, hesitated and bogged around 40 - 45 mph, and it had erratic fuel trim readings. Cleaned MAF sensor and air filter, but the problem remained. Before going to a GM dealer to buy O2 sensor, I found out about the TSB # PIP5529: Intake manifold bolts loose. But after watching your video, I was more convinced that the problem was gonna be the intake bolts, and that was it, bolts were loose to the point that the intake moved back and forth. The problem was resolved, car runs like new again. Thank you, thank you, thank you. God bless you guys.

[@rodneybissell3628]

You are Very Welcome! So Glad this is still helping people after 2 yrs, Thank You for the Props Bro!!

[@juanitaellerber9668]

My 2015 Impala message say reduce engine power should I check the bolts on mine also?

[@juanitaellerber9668]

It doesn't have a code. That's all it say

[@juanitaellerber9668]

I need some help

[@chokorollyadventures1958]

@@juanitaellerber9668 Could be. I would check them just in case. Just remember that this only applies to the 4 cylinder 2.5 engine and not the V6. But most likely a dirty or bad throttle body, bad accelerator sensor, or in some occasions a clogging catalytic converter will display that message. Scan the computer for codes, I’m pretty sure there’s gonna be a code stored there even if there’s no check engine light on at the moment.

[@williamhighlander5398]

This video just saved my job.. i was completely lost and couldn't afford to throw parts at it..thank you so very much..back to work now..

[@rodneybissell3628]

You are Most Welcome 🙏 That is one of the Best Compliments to Date, Thank You for your appreciation ♥️

[@domingoboileau6016]

Hello, you are a life saver, I have had this issue for 6 months we have taken the car to a mechanic then the dealership. I am going to try and return a few parts but really at this point I just don't care that we spent many $$$ and it has been a long journey. I am no mechanic but I was able to fix this myself with your help what a relief! The car was so dangerous to drive my wife would make me drive that haunted Malibu! so happy thank you so much!!

[@rodneybissell3628]

That is Great News!! Glad we were able to help

[@ryanjames5799]

I have the same white Malibu and same year. Mine was doing the exact same thing and I replaced the MAF and it fixed it. I will check my intake bolts when I change the cam cover gasket. Mine just hit 202k. Thanks for the video, so hard to find info on those cars. Now they have the gm service manual on eBay for $7.

[@joseromo1472]

El mismo problema con mi malibu 2015 LT. Problema resuelto ayer 2024/May/07, cuatro tornillos flojos. Gracias a este video, yo solamente perdí $103 USD al comprar el MAF sensor innecesariamente. Thanks for posting this video, I can see that this is a very common problem. I only wish many other people could watch it before spending a lot of money and time on sensors and other stuffs and not getting solved the problem.

[@rodneybissell3628]

You're welcome!

[@dstnhrt]

This video saved my sanity ! Thank you thank you thank you !

[@rodneybissell3628]

You are definitely welcome… After me finding the problem, I figured My sanity wasn’t the only one in jeopardy!

[@christopherstafford3437]

You guys are awesome,dealer couldn’t figure it out at all,I fixed my sons intake after watching your video and now his Malibu runs new.Big thank you so much

[@Spacesprocketz]

WOW! My gf has been having an issue with her Malibu, especially while idling when the car switches to ECO mode. This morning she called and told me she was getting the Stabilitrak light... I'm going to check this today. Thanks

[@rodneybissell3628]

Let us know the outcome please…

[@kennyshelafoe7090]

Intake is lose

[@dowutchudo]

You have no idea how much you just helped me with this video. I went straight to the intake manifold first and sure enough it was loose. Thanks again for your video!!!

[@rodneybissell3628]

Thanks for the props Brother!!

[@rodneybissell3628]

So glad our video was able to help you !

[@TonyLandrum-o4s]

Thank you!! The dealer only wanted to focus on the parts that threw their own codes. We only found 3 out of the 5 bolts, but they were super loose and I think tightening them solved the problem!!!

[@rodneybissell3628]

Awesome, Nicely Done! Yeah GM Stealerships are good for that! They kept trying to tell me it was the Purge valve until I called them out on it.. (Purge valve is near front top of Gas Tank, I installed an OEM purge valve and before I took it to the dealership I physically tested purge valve while in my hand with a 12 volt battery…. Then they tried telling me it was the 2 ft harness that plugs into it… I said nice try again, I had pulled harness and Ohmed out with a Fluke Volt/Ohm Meter.. They could do nothing but stand there and breath through their mouths! Then I found the Intake issue and here we are 😊

[@carltonthomas3579]

Hello Rodney how you doing fam good video. ? I have the same year in type of car like your wife's on my dash steering problem came on my dash n everything start flickering in the front on my chev started shaking? Do you know what the problem? Plz help

[@rodneybissell3628]

Sounds more like you have a “Hot Rod Lincoln” Hahahaa Couldn’t help my self, Almost the same words in the song..😁 First, did you check your intake bolts like in the video ? Cause my wife’s car shook terrible as well.

[@abdulrahmanalshaikh5560]

Guys whats the name of that item or place so i can tell the workshop about it help me plz , thanks alottt

[@rodneybissell3628]

Hello, Its called the “Intake Manifold” Where the Intake is Mounted to the Head.

[@abdulrahmanalshaikh5560]

@@rodneybissell3628 my engine is 2.5 eco 2016 is it the same place behind the engine ? because my engine looks little different even though its the same model

[@wyntonfreemab5907]

Rodney please help I’m having these same issues with my 2014 Chevy impala.. I want to save my car and not just trash it.. do you guys still own your Malibu and did you get it back to running well?? I’m having stalling issue and my reduced engine power/stabilitrak issues.. will also shut down after some turns/ stop signs and lights..

[@rodneybissell3628]

Yes, Honestly If I would have found the Loose Manifold issue First.. It would have saved my GF a pile of Money..It didn’t cost anything to tighten the bolts and her car ran Perfect after the Video ! No Stalling, No Reduced Power, And Even what I call the “Golf Cart option” worked again (Press gas Pedal and engine starts at traffic light)

[@tienporter2399]

I have the same car but different codes. Always throwing parts in but never solving the actual issue

[@rodneybissell3628]

Check your intake !

[@cbrowie6329]

Its crazy that we know more than the dealers. They should be privy to uncommon fixes to their vehicles.

[@rodneybissell3628]

I’ve had Dealership’s comment on my video also.

[@loganhittle423]

Awesome thank you guys for making this video. I own a chevvy malibu and I'm trying to learn to fix its issues myself to save money. This was a huge help!!!

[@rodneybissell3628]

You are most welcome 🙏 Glad it helped

[@ByEmptynessAbducted]

Cheers, this is a godsend.

[@Les-h7e]

Just fixed this exact same issue on a 2015 Malibu with 69,000 miles on it. Your video was very helpful but I did want to make note there is actually 5 bolts holding that intake manifold on, you missed one on each end. I only knew this from looking at images of intakes on ebay to see before I put it all back together. Again Thanks for making this extremely helpful how to video.

[@rodneybissell3628]

Thank You For the Update.. I did put there are actually 5 in the description later.. Not sure if it shows up on your end, Thanks Again

[@maverick744]

You all saved me around 300 bucks thank you so much,, I had a engine power reduced message on my 2017 Malibu LT and the codes were showing throttle body along with saying my gas pedal assembly was bad as well so literally 15 minutes before placing my order on Amazon for the parts I checked the intake for poop and giggles and was like WTF?!!.. ya got a sub from me and my word of mouth for both of your help.. thanks again

[@labanburchette4136]

Did you tighten the bolts up really good and tight mine feels like plastic bolts screwing into plastic housing. I'm almost scared to go super tight a second time around. Our bu feeling like trans isn't shifting properly itll go to 3k rpm and just kinda hang out there no slipping or anything just wondering if this booger come loose again

[@wezrwolf]

Thank you very much for your video. My 2014 malibu bolts were loose as well. Just tightened them. Now I'll hope for the best results

[@JamesDotson-lx9tt]

Would it be the same for 2014 throwing map sensor my car is stalling struggling to start and burning gas

[@rodneybissell3628]

If it’s the 2.5 Ecotec.. then Yes! Intake Manifolds known for nearly falling off these engines

[@SladesVWBeetle]

Wow good video!! I would have never found that issue!!

[@rodneybissell3628]

Vintage Car Yesterday Thank You, Was hoping it would help Someone pulling their hair out and blowing a ton of money for no good reason.

[@SladesVWBeetle]

Rodney Bissell I honestly just posted this clip on a Malibu forum! Very thankful

[@johnpugnale6866]

Spent ~$1000 with three mechanics chasing this problem. Watched your video and tightened three bolts in less than 15 minutes for $0. Test drive showed 4/4 successful resumes from auto stop and driving performance returned to normal behavior (watched intake manifold pressure). Thanks very much!

[@rodneybissell3628]

Wow! Thank You for your feedback, You are Most Welcome, I’d like to know how to start a Class Action Lawsuit.

[@michaelsaintulis1988]

👍👍👍👍 Thanks a million I had that problem and I did what you did with the loosed bolts and no more engine speed reduced it runs perfect thank you guy's.

[@rodneybissell3628]

That’s Awesome! So glad you found our Video,You’re Welcome

[@danieldelacruz7305]

So i guess this was the problem. How much would a mechanic charge me to fix this. An honest one of course

[@rodneybissell3628]

It absolutely was the problem.. You don’t need a mechanic honestly. If you can acquire the tools (A Set of Torx Bits for engine cover, 1/4” drive 10mm socket and Ratchet with a 4”extension an 8mm socket for the hose clamps… The Video will walk you through it all.. I have confidence in you!! Watch it again and pause it if you have to.. No Shame in it, You’ve got this!!!

[@scottlitteral9144]

WOW found this while looking for something else. Thank very much. I have been doing the same with throwing parts at it. I even took it to a dealer and they could not fix it. Thank you Thank you for the video it fixed my stumbling and power loss weird transmission shifting. I tighten 5 bolts total. three on top and two on each side under each end. all i can say is thank you. I have a 2014 Impala if that helps anyone else..........wow

[@rodneybissell3628]

Thank You for the reply! Another satisfied Customer hahaha So Glad We could Help AND Save Money, It seems the GM Techs NEED to watch this video

[@bobschomburg8875]

If you and your girlfriend ever make it up to Kearney, Nebraska,...or Lincoln,...give me a shout and well go check out a blues bar and request some Stevie Ray Vaughn,...drink a little too much,...I'll enlighten you about Husker legends and praise you and God almighty for this video...drinks are on me sir,..thank you thank you thank you!!

[@automotivesolutions8192]

This worked, cannot believe they were loose. Great job!!

[@rodneybissell3628]

Glad we could help! Stay Safe

[@jamiemciver2326]

Great job and I guarantee that if it isn't the one problem it's definitely one of the problems. I am on a similar path. Actually had to go much deeper but I'm also getting many codes randomly that gm mechanics can't figure out and want to throw parts at it.

[@rodneybissell3628]

Thank You 🙏 We found that is was the root of all the Codes being flagged.. Gas Cap for instance..New OEM Gas Cap did not solve the code saying it was the Gas Cap, Even after clearing code it came back saying same thing.

[@justaskregg7141]

You’re a life saving , my wife’s car has the same issues , I’ve replaced the o2 sensor bank 1 and maf sensor and I bought the Map sensor but I seen your video before I installed 4:45

[@justaskregg7141]

I’m taking the map sensor and Maf sensor back

[@wmattaej]

I had this. I also eventually found a SPLIT IN THEW INTAKE under the throttle body/air valve. Just a FYI .

[@jjguerrero9230]

Thanks I have the same car and possibly the same problem.

[@rodneybissell3628]

Odds are this is your problem, I have 600 messages from people that All have had the same problem.

[@angellopezvilla9964]

Where you guys able to fix the issue having the same problem

[@rodneybissell3628]

Angel Lopez villa Tightening the Intake Bolts absolutely fixed all the issues she was having.

[@keyonnabrown376]

I’m praying this this the only problem with my car!! I was about to get rid of it

[@gabrielramon5960]

I have a question was you Malibu stalling while you were driving and came to a stop sign

[@rodneybissell3628]

Gabriel Ramon Yes, And Stalled while driving and waiting to make a left turn

[@dmbnorthphilly]

Well my car is hesitating at lights and feels like it’s going to stall but no codes so ima try this method out today and see what happens hopefully it is and nothing else major got a 2013.

[@rodneybissell3628]

How many Miles ? If over 100k miles check/change spark plugs also

[@josebrinsenojr208]

Toyota celicas same shit they need a metal intake manifold but have a stupid ass plastic part

[@rodneybissell3628]

Not sure about Celicas never owned one, But I have owned a few 22RE’s and they are pretty much bulletproof

[@CuttillEric]

Thanks guys

[@dmoney6042]

I think u should post more videos like this for the Malibu 💪🏾

[@rodneybissell3628]

d Money Thank You, I may be doing another soon for the Vent Valve which is back by the gas tank. Soon as I get my project car off my hoist , Stay Tuned

[@glennbuchanan5780]

My friend had the same thing happening I saw your video and got all 5 bolts out and put blue lock tight on them.You guys saved her a lot of money.

[@rodneybissell3628]

Glenn Buchanan Nicely Done Sir!! So Glad We could Help♥️

[@TonyLandrum-o4s]

​@@rodneybissell3628 We could only find 3 of the 5 bolts - the ones on top. Where are the other two?

[@rodneybissell3628]

Two on Bottom

[@kennethsloboda1233]

Thank u guys, my 2015 malibu “Chevy App is telling me is the Exhaust Emission system is failing, I’m sure them three bolts are loose on the intake causing all that extra air to be sucked up into the engine, great find guys, Appreciate it

[@marklewis4689]

I have a 2014 Malibu LT do you know what the problem is when driving and the check engine lights flash and it say SERVICE STABILITY TRACK?trying to fix it for years now

[@TourettesMobileMechanic]

No map sensor. Also. Not the problem. Check your pulleys. Tensioner… FYI. The evap canister is always a issue with the ground wire. What was the problem here?? The I tak leaks badly and will not ever hook up well. This is the number one problem on here… also. Buy a magnet 😂. Great learning video.. 🎉

[@rodneybissell3628]

🤣🤣Aluminum Flashlight 🤣🤣 But I hear ya

[@guccicastro2025]

I have a 2014 Chevrolet Impala LTZ 2.5L I am getting the code P16DO and I change both exhaust and intake rocker arm solenoid and my check engine is still on and so is the service stabilitrak Also my car is starting to hesitate and shake I don’t know what else to do can anyone help me plz

[@chriscarrington7547]

Same

[@jasoncarranza4050]

U think this will fix code P06DE

[@rodneybissell3628]

I’m not sure Bud, That is an Engine Oil Pressure Control Circuit, Have you tried changing Oil Pressure Sending Unit(Sensor)?

[@joshcourtois9556]

I just bought my 2015 Chevy Malibu LT EcoBoost. I'm having the same exact problem. I'm going to try this I really hope it works I've read the comments and this seems to be the exact problem on this exact car.

[@garydeanstovall370]

Good job. Fixed mine too

[@simpleshoereviews4636]

I’ve checked mines to see if it’s lose and mines don’t seem to be . I put everything back together and I’m still getting this loud noise like it’s a vacuum leak somewhere, the noise is loud from start up and while driving. Any other ideas? Codes I have are P0297, P0014, P0106

[@markbren8573]

Thanks Guys for the great video. I had the same problem and you video helped me fix my car. Thanks Again!

[@rodneybissell3628]

Mark Bren You’re Very Welcome Sir! Thank you for the positive feedback😊

[@itistrueitisafact5432]

Thanks

[@taheiyaellerbe6969]

Can anyone help me find the fuel pressure regulator for the 2015 Chevy Malibu

[@alonsoescamilla2977]

Trying this right now

[@rodneybissell3628]

Let us know😁

[@tuyhoaphuyen3412]

Damn chevy, I almost cut off my kidney because I thought its the problem. Thanks for this video 😊

[@rodneybissell3628]

Tuy Hòa Phú Yên You are Welcome😁😁

[@user-us5qt6mv5d]

I'm having the same issue I've tooken it to the mechanic twice and since there are no codes they cant diagnose the problem I will be trying this on my 2014 impala thanks I could probably be saving my self hundreds of dollars will update

[@Justin67j]

A did you ever get around to doing this i also have a 2014 impala 2.5

[@TourettesMobileMechanic]

Oh wow. I was right. Was a leaky intake and it’s a stupid design 😂 . I had a hell of a time. Thanks guys. I already know this but yea that’s a pain. mAP sensors rarely go bad….

[@rodneybissell3628]

Nice Job Sir!!

[@Thagreenmonsta]

Did this fix the code issues and stalling?

[@rodneybissell3628]

Well, I have over 600 comments Thanking me for the video.. So I think its safe to say Yes

[@johncoward9632]

Next to throttle body the left side

[@mstnggabe]

Thank you for sharing… mine was doing the same thing and checked it. It was so loose, tightened up and seems to be driving great now.

[@ElwoodWard]

Tell her let the man talk

[@gadaniel40]

That really help me understand where the throttle body is and how to get to it ... thanks for the video

[@Tchee2]

Can someone share a tip on how to get to the clamp bolt under the right side of the intake?? I cannot get to that sucka!

[@rodneybissell3628]

Shallow socket 1/4” drive.. Maybe with an extension and a universal

[@Tchee2]

​@rodneybissell3628 thank you so much! I got it done! I am so frickin proud of myself!! 😊🙌🏽💪🏾