2015+ F-150 subwoofer install made easy. Kicker 10”.

[@jacobjohns2194]

Man this what all videos should be like straight to the point and no bull.... I greatly appreciate you!!!

[@landenphipps]

bro i’m just now tuning in, thank you so much for being straight forward. you were literally such a help to me. did everything step by step with a 2016 f150. please post more about things you do to your truck in the future!!

[@ls1dk]

I picked up the same amp/sub set up and i wired it up with the factory 1212 plug, very easy. But i didnt have a way to use forscan and 1 of the 3 dealerships that i was able to actual talk to an advisor said $90 and soonest is 2 weeks out...yea screw that. Took a chance and wired it up exactly how you described with the same settings and it works PERFECTLY! thank you so much for making this video. Definitely recommend T-tap connectors for the speaker wires, pretty tight in there.

[@mw3designs]

Is the power and ground in the 1212 plug? Thinking to go this route instead of the factory kicker sub, just don’t want to run any additional wires.

[@OneMoreRedNightmare]

More like this. You just saved me several hours and 3 panels worth of removal. You've earned a firm slap on the shoulder and a solid "Thanks, champ."

[@OneMoreRedNightmare]

Also thanks for mentioning disconnection the negative battery terminal, absolutely none of the other install videos mentioned this.

[@connor718]

You’re awesome! thank you for uploading this. Took me about an hour and a half to get my Rockford p300 10t in.

[@Txst21]

Where did you place the p300 ? I want that specific power sub but dimensions looked a little to large. For f150 2019. I was thinking just under rear seats on the floor maybe?

[@jonnathans553]

I cannot begin to tell you how helpful this was!! Thank you for making this video. The only thing I did differently was the speaker location and anchoring the speaker. I too had trouble with the speaker wire reaching the passenger side, so instead of splicing more wire, I moved the speaker to the center of the backseat. That gave me just enough length to reach. I ended up anchoring he speaker to the back bulkhead carpet because everytime I stepped on the brakes, the speaker would flop around.....so annoying. With that said, GREAT VIDEO!!

[@Life-in-South-LA504]

Nice! Video, I hate those professional videos hooking up those expensive LCi2, I did the same to my 2019 Ford Expedition XLT, the wiring color code and the second pair of twisted wire there also matches. I just assume the Brown Yellow/White Green is the rear speaker as it's in bigger gauge than the blue purple/green gray pair likely for tweeter. I had my wire reverse, thinking Brown Yellow is possitive, you saved me! Thanks Bro!

[@johnwalton2857]

Excellent video. Finally got mine done today. Thank you.

[@jefflongfellow6370]

Great Job!!! Your instructions worked perfectly!!! Really appreciate you making this video!!

[@andrerichmond296]

“My Leg!” 😂 nah fr thank you ive been looking for the wire colors for speaker wires and refused to take the factory HU out just to tap in to it

[@tbarnes00]

So does the blue remote wires not get used? Or are they just tied into the speaker wires? Or capped off?

[@silvesturn]

thanks for the video it was good info...

[@RetreatHacker]

Super helpful! Thanks

[@alcalc8938]

You need to get the signal from the front speakers, the rears don't get the full signal that the fronts get. The signal to the rears get bass cut out as the volume is increased. Otherwise thanks for the video

[@juledoren]

Ooofff i took my rear speaker wires, might have to rearrange mine

[@gothamxp5]

I second this I just installed my amp/sub two days ago and was getting minimal Bass. Almost returned it to amazon but then I saw your commend and I spliced into the front speaker wires and the quality of base is much better. Thank you alkalk8938

[@Thedumbwayhomie]

Did u have to remove the head unit?

[@gothamxp5]

​@@Thedumbwayhomieyes it made it easier. There's plenty of room behind that unit too. Use zip ties for the wires it helps alot!

[@chrissmith1608]

Where did you connect to the front speakers? I’m hoping to get this done today? It sounds terrible right now!

[@elyrivera7717]

Great video thanks for your help.

[@patrickp3693]

Anyone else have the issue where the amp won’t turn off after turning off the truck, removing the key and exiting the vehicle, Blue light stays on, I’m afraid of it draining my battery. Even though I’m having issues, still the best video on the HS-10 install.

[@IdleHands]

Mine takes a couple minutes to turn off. Check back on it after a few minutes.

[@voneerbiedigenhelpingfromt3989]

I've been googling and searching for days now for exactly the same answers as yours , only difference is that in my case I bought 2 different brands of active subwoofers ( WITHOUT REALISING THE KICKER IS SAME VIDEO, BUT THE " ICE " SUB ONLY HAS RCA INPUTS ) So can I connect 1 sub through RCA to main unit AND then connect the kicker through the speaker wires?

[@Thedumbwayhomie]

How r u grounding to aluminum?

[@RanGer-498]

So you grounded to thev aluminum part of the truck?

[@crised5746]

So you didn’t plug remote wire?

[@willthroIt]

so where did you end up connecting the blue remote wire

[@Cichlid-heaven]

Where did u hoop up the remote wire?

[@DJSpoe]

The DC option on the Amplifier basically knows when the stereo is on because of the speakers being active so that acts as the blue wire, if you use RCA cables then you need the Blue wire

[@919ofak]

If you just use the audio signal (to turn on amp) feature, do you still have to run the BLUE remote wire to the back of your stereo?

[@EthanFowler-u7m]

I need this answered lmao

[@tbarnes00]

So do we not use the blue remote wires???

[@chuckplainview4085]

Is it any good?

[@SeanSoto]

2020 F150 - After I tapped into the Right Rear Speaker wires (+/-), my check engine light comes on, the error states “Malfunction Indicator Lamp - Regulatory: Powertrain Control Module has detected the power relay de-energized earlier than expected”. I followed your video exactly, I triple checked the wiring. Funny thing is, I tested the sub while only Left was wired in, and it sounded great and no engine light. Any thoughts/ideas?

[@IdleHands]

No idea mine hasn’t had any problems. Maybe it cut the wire instead of just tapping it? Those taps can def cut wires if not on there perfect.

[@SeanSoto]

@@IdleHands oh man, I didn’t think of that! Thank you so much, I’ll check tomorrow and reply with an update!

[@SeanSoto]

@@IdleHands turns out my Right Rear positive t-tap didn’t actually tap into the wire. The PCM noticed something wasn’t right and threw that error. Fixed the issue and the system is bumping! Thanks again for your video!

[@IdleHands]

@@SeanSoto hell ya thing slaps. 👋

[@SeanSoto]

@@IdleHands New problem, I keep blowing the 40amp fuse in the 12V power wire… I just used butt splice connector for this. What are you using? What do you recommend? This is the only thing I can see that might be causing the issue.

[@stang1973]

I just checked my truck and i do hae the connector back there. If I purchase the pigtail, what wiring will that take care of? also do u have a wiring diagram of how it should connect to the amp pigtail? what other connectors will i need?

[@IdleHands]

There is a forum thread online about it. Might just have to search google.

[@stang1973]

@@IdleHands do you know what forum?

[@kajaha13]

@@IdleHands where you able to find the wiring diagram?

[@raidernut5]

So i installed mine this same way. I have a android head unit as well. for some reason the sub works great when i play music from internet apps pandora etc, or off of my phone. But for some reason the signal goes away when i use the trucks am/fm radio, or the factory Sirius Radio. There is no sound whatsoever coming from Sub in these two situations. Does yours do that or did i do something wrong?

[@IdleHands]

No mine works great from my phone and from Sirius radio.

[@raidernut5]

@@IdleHands any idea what my issue could be?

[@dennisperezcuts5256]

@@raidernut5 did you ever figure it out?

[@BenDover-ey3xu]

I thought it had to be wired directly to the battery. Does it not draw much power?

[@IdleHands]

It’s turns off with the truck.

[@haydenscott2514]

did the sub come with all the wires you needed or you had to buy them separately?

[@Miguelnunezmusic]

Wires are included 👍 *wire harness is included, but you might need to buy a cable to extend the speaker wires to stereo if you are thinking about hard wiring.

[@crdwzy4688]

I'm assuming that red wire was needed to extend your blue?

[@alexmburgos]

Do you have auto start stop? If so, does it affect the sub?

[@IdleHands]

Yes and it doesn’t mess with the sub because the sun stays powered for a few minutes after the trucks been off.

[@christopherhorton7657]

I don't understand why people run RCA's from the stereo or tap into speaker speaker wires. There's literally a wiring harnessed in the left side rear pillar. Just get your signal there and run power. It even has a remote turn on wire(blue). You just need a motorcraft wcc 1212 harness plug, Amazon 22 bucks. To use the remote turn on you have to turn it on with forscan or the Ford dealer if you don't have DC offswitch

[@IdleHands]

And I don’t understand why people who know what to do would watch a video on how to do something? 😂

[@Azhrik]

He started the video saying his truck doesn't have the WPT12 connector in the rear pillar. Did you watch the video??

[@livefootagetube]

You don't have to add the blue remote wire if you tap into the speakers. The kicker will automatically turn on and off with your ignition there's a switch that you can switch it you have options I know this for the 2024 version because I have it

[@stang1973]

Also I realized at the end you mentioned using Forscan. So in order to use that connector, you have to turn that connector on?

[@IdleHands]

Yes that’s my understanding. It’s something you have to change in the computer.

[@stang1973]

@@IdleHands just waiting on my OBDII connector to get this this turned on via forscan. such a sweet and easy install.

[@JustAGuy781]

@@IdleHands so the way you ran it does not require the ForScan correct?

[@JustAGuy781]

@@IdleHands so the way you ran it does not require the ForScan correct?

[@IdleHands]

@@JustAGuy781 correct

[@zacharygunnoe185]

I want to add a second subwoofer to my truck but don’t want a crap ton of extra money in this system. Can I do this on top of my Sony sound system with the stock subwoofer?

[@IdleHands]

I don’t see why not.

[@wednesdaychurch8965]

My 2014 f150 has a stock sub as well. Best Buy won't touch the truck due to a small amp wired in to the Sony system from the factory. They said a preloaded sub will ruin the Sony amp. Don't know if there's any truth to what they said, may have just wanted to not do it

[@cvd127]

@@wednesdaychurch8965 not true. If you run a separate power and ground and remote to this setup. It won’t affect the other Sony components at all.

[@wednesdaychurch8965]

@@cvd127 I appreciate the advice.

[@cbfd307]

I had 2 10” installed under rear seat. Much better base than this 1 Kicker

[@TheCoryjones26]

The truck is aluminum the ground needs to go to the frame or battery not the body. Also tieing it to the speaker wires wont work for the sub the radio cuts the bass as the volume goes up.

[@gokblok]

Kicker recommends high level inputs over RCA for this application.

[@jaredzanelli7867]

Quick question, why not use an inline fuse on that constant 12v? No need? Thanks Also great video!

[@IdleHands]

The subwoofer itself is already fused also that line is already fused in the truck. You could always add another fuse but to me it’s overkill.

[@gokblok]

You should. The power wire should be fused within 12 inches of the battery end. The fuse on the amp protects the amplifier internals, and the fuse on the power feed protects the wire itself. A short in cable that large can start a fire pretty quickly, and that battery-end fuse is your protection against that.

[@juledoren]

@@gokblok havent ever had problems without a fuse, not required

[@GFY..-..]

@@juledoren just because you want to be stupid doesn’t mean others should be too

[@DevArnold]

Wouldn’t you tap the stock subwoofer signals? After the dsm so you dont mess with the comoonants each door speaker and stuff is a component coming from the Sony dsp that’s filters everything. You def should have tapped after the stock amp and from the subwoofer signal

[@user-jm4nj7nz6t]

Butt splices are NOT a hack, that's exactly what you should be using on any automotive wiring. NEVER solder; the constant vibration of a vehicle will eventually cause solder joints to crack. That's why NASA uses crimp splices for spacecraft. You just need to make sure you use a proper crimper and make sure it's the right type for the splice you're using! I had to buy a different crimper for heat-shrink insulated connectors versus non-heat shrink. And always use ratcheting crimpers, they will always provide higher clamping force.

[@MickF04]

How do you anchor one of these subs?

[@curtraso]

It turns of from the signal from the deck

[@msalazar89]

Does it come with wiring and the knob in the box?

[@IdleHands]

Yes comes with almost everything.

[@msalazar89]

@@IdleHands I see it on Amazon, but it says sub only from 369, and 400 for the knob and wiring! It should all come together in the box though right?

[@IdleHands]

Ya I think so but to be honest I don’t remember.

[@laxwonder]

Yeah I just got one from crutchfield and it came with everything

[@sawred32]

If I'm tying into my factory speakers do I have to run the blue remote wire?

[@alexmburgos]

What is a WPT-12 connector?

[@IdleHands]

You can find them on Amazon have a look.

[@randycalhoun8974]

I was thinking of putting 2 of these in my extended cab f150. Is it required to have both speakers wired into one sub? Is it possible to just wire the driver side wires to the driver side sub and vice versa for the passenger side wires for the passenger side sub?

[@voneerbiedigenhelpingfromt3989]

I've been googling and searching for days now for exactly the same answers as yours , only difference is that in my case I bought 2 different brands of active subwoofers ( WITHOUT REALISING THE KICKER IS SAME VIDEO, BUT THE " ICE " SUB ONLY HAS RCA INPUTS ) So can I connect 1 sub through RCA to main unit AND then connect the kicker through the speaker wires?

[@Azhrik]

Anyone else have the issue where your truck has the wpt12 with no signal or power? Ive read forums and watched other videos to enable it in forscan with no success. Im about to bypass it entirely and lean on this video.

[@dingdongdillybean]

I have a 2019 without the c pillar connector. About to pull the trigger on this sub. Anyone follow this to a T and ensure it works ?

[@SAREXXGLCH]

I’m about to find out today. I have my old wiring from an alpine sub & amp (got stolen) so I just got the kicker 8” gonna go install it hopefully before it gets too dark.

[@carlitosza]

How the subwoofer is behaving with the auto/start feature?

[@IdleHands]

Been working great.

[@AJG_305]

So I have an amp an subwoofer, it has direct power connection to the battery but I recently got a new radio installed and they didn’t hook up the amp. Can I use this same method in the video to give my amp signal?

[@djuru]

Did you adjust any settings in your factory settings to improve sound? Not too blown away with it after install. I thought it would be better.

[@IdleHands]

Didn’t change my he factory settings but I did mess with the settings on the unit itself. I also changed all the other speakers in the truck so that helped.

[@Zinctwentyone]

How were you able to discern which was speaker wire or not in the sides?

[@IdleHands]

By color and size.

[@thekidbart4528]

You sir….are clipping hard. You have your bass boost all the way up and your gains almost half….when using bass boost the gain comes down and if you turn down your bass boost your gain goes up. Play a 40hz test tone, turn your bass knob all the way up then set you bass boost to where ever you want and then start to set your gain, once you hear the bass sound different turn your gains down until it goes away.

[@IdleHands]

Ya I adjusted everything after the video. Thing sounds great just what I was looking for.

[@nickacuna7215]

Can I do this on 22 tundra double cab? Do you know if the speaker wire colors are usually the same on other vehicles. Great video btw

[@nickacuna7215]

Follow on question did you have to connect power cable to battery?

[@fiveohgod]

Butt splices aren't the hack, Scotch lock splices are a total hack. Especially on your power connection, they cannot handle any current.

[@machr85]

Once again another video showing sub install but no sub playing music, im starting to think these guys just do these videos for the views, how do we know the speaker wires are correct when he didnt even play music thru it?

[@robertbarcus1963]

Total Bling Bling

[@GC-bz3ob]

Don’t buy this! Tech support just told me these woofers only last a couple years, and most quit after only a couple weeks!

[@outtakontrolcustoms7654]

Fire that tech support