2015 Mercedes c class grab handle removal

knowing how to remove the handles before bending and prying will greatly improve your chances of not breaking anything.

[@ThatS550guy]

3 years later and you are helping me out at this moment i broke one trying to get it out on my 2016 S550 but nothing i cant replace

[@losjankoscustoms153]

Just saved me a ton of time, thanks brother!

[@aronvandriel5828]

Dit exact the same and did. Damage hole the roof 🙁

[@user-mg2mf2ul5e]

Thanks

[@bdub03]

Thanks a ton!! Same as on a w166 ML 🎉

[@allthingsnorah]

awesome video, its verry helpfull

[@Crypto_official_81]

Thank you!! 🙏🏼🙏🏼

[@TheLithGH]

appreciate it sir!! Need to pull the headliner down in my c300 to fix the moonroof guides that broke! Fun times...... uggh

[@dennisaertsen6411]

did it work how did you remove the clips ?

[@TheLithGH]

@@dennisaertsen6411 I didn't do it. It was to fix the moonroof clips, but I ended up tackling it from above, and not removing these clips and headliners.

[@tabikes69]

@@TheLithGH Could you explain to me how you did it because I have the same problem with my sunroof?? Please

[@tabikes69]

@@TheLithGH And I didn't find any other way except having to remove the entire roof.

[@TheLithGH]

@@tabikes69 I ended up not removing the clips or headliner. All I did was loosen the two small screws that hold the moonroof glass to the slider on the front side, and then lowered the glass ever so slightly, tightened the screws back up again, and now the glass closes flush with the rest of the roof.

[@JA-uq3ec]

It didn't work for me, I broke the plastics and it's still stuck. In another video they say that it is removed from above not from below as you have done, it also has the sign that it is removed from above but there is no way, everything breaks and it does not come off.

[@TheCockyG]

How do i put it back in

[@oderetsamtin2712]

Hi.. thanks for the video But how you installing the grab again😂 I had removed the headline roof, but it’s really to install handle grab and sun shelf again. Thanks

[@wavyjin910]

Can you not install the handle back by following the procedure in reverse direction?

[@herrbela84]

They don't even use screws anymore...

[@herrbela84]

But not for these grab handles obviously...@@allthingsnorah