2015 Seat Leon window switch replaced & door card removed

[@07Nibs]

Great breakdown to get to the switch, helped me out a lot when I replaced my drivers side switch today.. much appreciated 👍🏼

[@AutomotiveDIYTutorials]

no problem, glad it helped

[@glh7503]

Spot on walkthrough, tackling this at the weekend. I thought it was just me but it seems to be a common fault🤔🤔

[@AutomotiveDIYTutorials]

defo a common fault as i have did alot, even posted one recently on a passat. take your time and you will be grand

[@glh7503]

@@AutomotiveDIYTutorials should be fine, Following this video should be me right👍👍

[@chrisw1379]

A while ago so you might not know or remember, but did you use a switch with red LED backlights? There only seems to be ones with white LEDs or it doesn't say at the moment

[@TVTim86]

Is it difficult to get the door panel back on? It's a lot of dismantling just to replace a relatively cheap part

[@AutomotiveDIYTutorials]

No not really, just fiddling with it should be ok. Like most things with cars,have to remove numerous amounts of other parts to replace what you want. You will get satisfaction when all built up and working 👍

[@alankerr9395]

Hi just a quick question I may have missed in video but how did u get the window switch and handle off from the door card?

[@SunnyFLBoy]

I just replaced the window switch. If I knew that it would be that complicated and difficult to replace I would never had started this. I needed more than 2hrs fo this shit. Every peace needed to be dismantled just for the small switch. A really bad construction.

[@BigGee-i7q]

Very common im about to try to do my big bros this is his 2nd switch in 2 years.

[@kurumsajid9620]

Water came down from the roof of my car through the front window and onto the driver side controls yesterday, immediately this problem started. Back 2 windows are fine, drivers side wont go up n down and the passenger side only goes up.. is changing the switch necessary or can you just dry out the controls with a hair dryer? lol

[@AutomotiveDIYTutorials]

You could try it buddy but i couldnt confirm. If you know the pin locations you could put the window up with a 12v feed

[@JahangirAlam-bu2dn]

I have the same issue. Only driver switch is not working. Would be good to know if there is a way to tackle this without replacing the whole switch

[@alankerr9395]

How did you removed handle/window switches from the clips on door card ?

[@AutomotiveDIYTutorials]

There is about 15 t20 bolts holding the panel on at tge back of the doorcard

[@shamaselahi5606]

Thanks 😊

[@ginguscann]

excellent video. im from Norn Iron too. my car is under warranty for 6 months ive has it two weeks and this switch failed at the weekend. just out of curiosity what would you charge for the labour and roughly how long would it take someone with your abilities to complete the work. cheers chris

[@AutomotiveDIYTutorials]

Glad you liked the video buddy, Id say 1hr max to replace the switch as the door card needs removed. If its under warranty it shouldnt cost you a penny. But main dealers charge a going rate of around £90+vat per hour. i mostly do these videos just to help people out or my students. if you have the correct tools you could easily do it.

[@sohailhussain5860]

Do you have to remove the whole door card to change it?

[@AutomotiveDIYTutorials]

yeah the whole door card needs removed to access the 10 20trx at the back

[@vice4784]

Porque no se ve desde un principio el video

[@AutomotiveDIYTutorials]

Sí, explico en el video cómo eliminarlo.

[@vice4784]

@@AutomotiveDIYTutorials pero el video está empezado no desee un principio

[@asone2327]

Muy bueno pero lo importante que es desmontar ya lo tiene hecho no le explicas

[@AutomotiveDIYTutorials]

Explica cómo eliminar a mi amigo