Genuine Honda Oil Filter + Washers 15400-PLM-A02 - Set Of 3 amzn.to/2WhppMy Honda Genuine 0w20 Ultimate Full Synthetic Oil (08798-9137) amzn.to/2UIicVa Adjustable Oil Filter Wrench amzn.to/3eSOeEK
@richardborge85413 жыл бұрын
I use a large zip lock bag around the filter to catch the oil. It's flexible and stays reasonably stable when spinning off the filter. During cleanup, I put all used paper towels etc in the bag, zip it up and dispose. I also find it easier to remove the front passenger's side wheel to access the filter. I usually rotate the tires so taking the wheel off makes sense.
@OwenLucas3 жыл бұрын
Those are great ideas!
@akui882 жыл бұрын
i have done 2 oil changes on my honda passport, i watched a ridgeline owner on youtube, he put a ziplock plastic bag over oil filter, unscrew it slightly and let the oil drain out, then completely unscrew the filter and let it drop into bag. little to NO oil spilled onto subframe or my garage floor and didn't make a huge mess. highly recommend ziplock bag method to catch the oil dripping from oil filter removal.
@OwenLucas2 жыл бұрын
That is a great idea, I would wait till the oil is cold, synthetic oil is pretty toxic on the skin especially when it is HOT.
@akui882 жыл бұрын
@@OwenLucas yea, i wear nitrile gloves. I have also tried the aluminum foil method, where you cover the subframe with aluminum foil, but that creates a mess on my garage floor. Ziplock bag method is the best. Little to no mess.
@RetrieverTrainingAlone Жыл бұрын
Why? Can you document this?@@OwenLucas
@constantinelopez982110 ай бұрын
One of the best step by step instructional videos I have seen
@jasoncharles69806 ай бұрын
I take the wheel off to remove the filter. I’ve tried every other way and this just seems to be the simplest and cleanest way to do it.
@OwenLucas6 ай бұрын
I agree, I don’t like getting oil all over the subframe.
@nsadventures78123 жыл бұрын
Love your content bro gives me boost to work on my car too. ✌🏻✌🏻
@OwenLucas3 жыл бұрын
Glad to hear it!
@RetrieverTrainingAlone Жыл бұрын
Can you change the oil without jacking up the Pilot?
@OwenLucas Жыл бұрын
You do not need to jack it up or even take the wheel off. It will be a tight squeeze getting under the vehicle but it can be done. Turn the steering wheel to the right for access to the filter. Make sure to use the parking brake and put blocks behind the tires to keep the vehicle from moving.
@cmonaco22 жыл бұрын
Great video! Did you remove your front passenger wheel to do this or just turn it?
@OwenLucas2 жыл бұрын
I removed it for the video but have since just turned it. Much easier.
@TimothyNewton3 жыл бұрын
Does the Honda oil have additives like Valvoline Modern engine oil to help prevent carbon buildup on intake valves that is caused by these new GDI engines?
@OwenLucas3 жыл бұрын
I am not familiar with the additive package but I am pretty sure that Honda's oil formulation would be the ideal use for its engines. I used the Ultimate Full Synthetic 0w20 as opposed to Honda's regular full synthetic. Its about $3 more.
@900Yugo3 жыл бұрын
@@OwenLucas Both are fine oils to use. As long it's a reputable brand. I use Eneos by Nippon oil sold at NAPA auto parts. Really good oil.
@acebestwords Жыл бұрын
I didn't see you torque the drain plug? What would be the torque in lb?
@OwenLucas Жыл бұрын
It's 29 ft lbs.
@Nerven86 Жыл бұрын
Add ceratec after breaking in period.
@Zukilover305 Жыл бұрын
Appreciate the ‘holes’ heads up…..ALOT!!
@mthomas38453 жыл бұрын
V good presentation
@OwenLucas3 жыл бұрын
Thanks a lot!
@mannuelmartinez6 ай бұрын
I Did the oil change on my 2016 Honda pilot did what the guy from autozone told me buy 6 quarts of oil but I put all the 6 quarts of the oil I don’t think it’s bad for the engine since it has high mileage and we run the truck a lot or I messed up by putting all the 6 quarts ?
@ohmrai42553 жыл бұрын
Great video. Thank you for sharing.
@OwenLucas3 жыл бұрын
Thanks for watching!
@stricklandgarageaviation2864 Жыл бұрын
Remember not to over tighten the drain plug. Use a torque wrench.
@stricklandgarageaviation2864 Жыл бұрын
45 N-m or 33 lb-ft
@OwenLucas Жыл бұрын
That is correct, a very often overlooked procedure. Thank you for the tip!
@shukerij3 жыл бұрын
Nice !!!!
@OwenLucas3 жыл бұрын
Thanks!!
@ronniek7748 Жыл бұрын
How about telling us often fully synthetic oil should be changed 😡
@OwenLucas Жыл бұрын
The Maintenance Minder on the gage cluster will tell you when to change the oil. It’s usually around 7-10k miles but I like to change mine around 5k.