Рет қаралды 6,429
This video is about 2016 charger dashboard cover removal n replace... you do not have to remove the windshield nor do you have to remove the complete dash assembly... this is about an 8/9hr task so do not let this frustrate you take your time...
tools you need for the task:
Short and long Phillips screwdriver
Short flathead screwdriver
7mm 1/4 drive socket
6.5mm 1/4 drive socket
Panel popper or plastic push pin tool
Written instructions:
1. Find all the screws to loosen the dash
2. Remove the top dash speaker grill ( (3) 7mm none Phillips head screws)
3. (4) 13mm steering column screws to drop the wheel down
4. After locating all necessary screws you should have the glove box unmounted, after that is done look straight up and remove the (2) airbag 10mm screws that’s connected to the dash frame once done so the dash cover should come straight up
5. You might have some troubles with dash going back on the air ducts but if so install the smaller rounder defrost ducts go on first then the dashboard cover slides right on top then you start the mounting process with getting everything assembled.
6. If you have any questions about this procedure plz feel free to drop a message or comment about this...