2016+ Honda Civic Hatchback Window Visor Installation

[@poolplexer]

I just got mine delivered yesterday. I'm going to use this video to install it today or tomorrow

[@piercedasian]

hopefully your install went smoothly.

[@poolplexer]

@@piercedasian it did except for the last one. Those clips u gotta push down on each one ended up killing my thumb

[@yourboykester4099]

Used this video to put them on my ‘18 hatchback great instructions!

[@piercedasian]

That’s great news. I bet the visors look great!

[@SLholli]

Same Measurments I assume? '18 sport hatch here

[@yourboykester4099]

steven hollimon ya all the hatchbacks would be the same, and you could just hold and mark them to where you specifically want them to be

[@piercedasian]

yep this kit will FIT all 10th gen hatchbacks.

[@gamercat7004]

When installing does the edge on the top has to be flush and the center end of the visor does it need to be flush perfectly? Or does it require a little apart from the edge of the door trim from the door?

[@piercedasian]

I just lined up the edge of the window visors with the edge of the door frame. If you're unsure, the best thing to do is do a trial fit before peeling the adhesive strip's backing paper. Its been a while since I installed the visors but if memory serves me correctly, I just installed the clips, lined everything up to make sure it all fit properly and then the last step was to peel the adhesive backer off and apply pressure to secure it to the car.

[@gamercat7004]

@@piercedasian my window visors don't have clips mine came with just M3 tape

[@piercedasian]

hmm, you better double check the instructions. Did you buy the genuine Honda ones or did you buy an aftermarket visor? The genuine Honda ones should come with 2-3 clips per visor.

[@gamercat7004]

@@piercedasian the ones I ordered are from procivic

[@piercedasian]

ah okay, so not genuine factory ones. That would be why. Either way, just line them up and stick on and that's pretty much it.

[@herbertnajeramarroquin1933]

What tint percent percentage is that? Looks real nice bro!

[@piercedasian]

I believe it is 20% on the back and 80% on the fronts. I like subtle tints (for legal reasons) and the back I don't like to go deeper than what a minivan would come stock from the factory would look like. I never understood the folks that want 5% limo tint on their cars. Its a hazard b/c its so dark that you can't see anything when its dark out.

[@Celomar35]

Does anyone know if these visors will work for a 2019 civic si sedan?

[@piercedasian]

I'm 99% sure that Honda makes the for the sedan. The installation procedure is fundamentally the same.

[@Rob_Nasty]

@@piercedasian except thet include hideous chrome on them.

[@MrCameljockey1]

Yeah I hate the stupid chrome. So dumb. When I saw this was like why couldn't they do that for all of them.

[@pedrocanoramos4419]

08R04-TBA-101 just got them for my 2018 Si sedan and they do Have the chrome trim

[@poolplexer]

Aren't you supposed to roll the windows up and down a few times to make sure the window track goes back into place?

[@piercedasian]

no need as we're not really modding anything with the actual track itself.

[@vleal1212]

Great video that I'll use when I install mine this week! Also from Canada :)

[@piercedasian]

hello from Alberta!

[@vleal1212]

Ordered mine through Honda

[@Eggsplanepls]

Wonder, can these be taken off and put back on again? Say, for example, if youre getting the car re clear-coated/ painted on roof as well as right above side windows.

[@piercedasian]

You can but I urge you to err on the cautious side when removing the visors. The 3M body adhesive tape is extremely strong and I'd only suggest removing in a warm environment (the hotter the better actually) and using a hairdryer to help soften the adhesive to remove it. To reattach the visors you remove all the old 3M tape with a combination of adhesive remover solvent that is safe on plastics + hair dryer, reapply a new thin line of 3M body adhesive tape and then reattach to the car. It's been done before and we do this at the dealership all the time.

[@Eggsplanepls]

also do you put the whole black pin+back rivet in the holes or do you seperate the back rivet part of the pin and put it in from the inside n lock it

[@piercedasian]

I didn't have to separate anything with the rivets. I just pushed them in while supporting the rear metal support bracket that I installed and the popes them in. Been many years now and they haven't come out.

[@teohondaep3]

Ιf you close the mirrors does it hit on the visor?

[@piercedasian]

not at all. In fact my mirrors are currently folded in on the car as I type this message and there is plenty of clearance.

[@stevenrodgers333]

Excellent instructions... thank you!

[@piercedasian]

Thanks!

[@akashseedhar2644]

Good tutorial. Step by step. How much did it cost. Might get it from the dealership

[@piercedasian]

It's been a while but I think the entire set was under $200 CAD after taxes.

[@kidchris1029]

Does this fit a '18 honda ex

[@piercedasian]

if it is hatchback then yes. If it is sedan then you'll have to double check with the dealership on the part #'s and compatibility.

[@MusicalFanatik]

Great well detailed video! I just bought some of these window visors...my car has just been ceramic coated...what do you recommend when installing the visors...just wipe the area with the alcohol wipes? Do you think that would be enough for the 3m tape to adhere properly! Thanks!

[@piercedasian]

My car is ceramic coated too and I just wiped with the alcohol prep wipes and stuck me on and so far zero issues.

[@MusicalFanatik]

piercedasian Thanks again 👍

[@ZorviC]

Great Video , great help to me thnx , keep up the good work buddy !! Greetings from Belgium

[@piercedasian]

hello from Canada! Glad you liked the vid. Thanks for watching.

[@ParaDiceYall]

Great video, anyway you can link the visor you bought in the description of the video, please?

[@piercedasian]

I just went to the local Honda dealership and ordered them. No links to order online in Canada unfortunately. Just call your local dealership and they'll likely have them in stock.

[@piercedasian]

rene rodriguez I believe I paid around $150 Canadian for the set of 4.

[@A_guan]

Is this how you would install the ones from procivic?

[@piercedasian]

I couldn't tell you as I've never installed a ProCivic visor before. I would presume that the procedure be extremely similar as that is really the only way to securely install these things onto your car and not have them break and fly off on the highway.

[@pedrocanoramos4419]

Beautiful cars man love them

[@piercedasian]

Thanks!

[@11superstar1997]

Link to Visors? I'd like to by them this week

[@piercedasian]

You just order them from your local honda dealer since it is a genuine honda part. If you're looking for a good dealer to work with contact either majestic or college hills honda.

[@ernniechan9302]

will this visor work on the 2018 hatchback civic sport?

[@piercedasian]

yep

[@xXstillwaterXx]

Will this be the same for the 2020 civic

[@piercedasian]

identical.

[@imjustfonzie3771]

what site you get these from ?

[@piercedasian]

I bought them from the local honda dealership.

[@imjustfonzie3771]

@@piercedasian thank you for the reply, do you know if the ones from CollegeHillsHonda would be the same as the ones you purchased from the Dealer? Because im unsure if the color would match the black paint correctly? The visors you bought from the Dealership look like they are color matched but its harder when you look online yknow? The pictures that college hills has kinda looks like an off black like dark greyish

[@piercedasian]

I knew I didn't reply to this comment.. good thing I remembered. College Hills Honda has the same ones as I do. If you order the GENUINE Honda accessory visors they will always come in that really dark smoked grey/blackish looking plastic. They don't come in different colours if you buy the honda ones. Just make sure you order the right ones (i.e for Hatchback or Coupe or Sedan).

[@imjustfonzie3771]

@@piercedasian alrighty thank you so much man, i just wanted to souble check, my visors come in tomorrow, so i cant wait to throw then on

[@piercedasian]

sweet! Hope they turned out as good as mine did!

[@thuancarson7614]

is this new? because I watched the video on how to install them and he specifically said that they will not fit the Honda Civic hatchback, because the windows are shaped differently.🤔

[@piercedasian]

Thuan Carson this video has been on my channel for quite sometime. The ones I installed are for the civic hatchback because that is what I drive. You will need to confirm with your dealership to see if they will the civic sedan.

[@thuancarson7614]

@@piercedasian I also have a 2017 Honda Civic hatchback😁

[@piercedasian]

sweet. It is an awesome and functional car :)

[@robertgraham5486]

I just ordered for s/t hatchback the last four digits are 101a They are the new ones

[@AnJuice219]

what are your future mods?

[@piercedasian]

interior ambient lighting and console lighting, sub swap and then amp install along with an audio control LC2i.

[@piercedasian]

Hey Andrew, I published a new civic type r sub amplifier install vid on my channel. Check it out.

[@Lino91TV]

Great video

[@piercedasian]

Thanks!

[@utah2nyc250]

Where did you get those ? The one from the dealer are clear looks better black out like yours

[@piercedasian]

I oddly got your question a year after you sent it. I got my visors from the Honda dealership. They are the genuine honda accessory and to my knowledge they only came in a smoked/almost black color and not clear.

[@the_batmobile0.4]

Will this fit 2018 Honda civic touring sedan?

[@piercedasian]

You will need to check with Honda to see if the part #'s are the same.

[@alfredomuro7310]

That red crx though 😍

[@piercedasian]

you like that do ya? ;). Yeah she's definitely minty and doesn't see too much road time due to it becoming more and more of a rarity as she ages. Can't even buy certain parts for her anymore.

[@alfredomuro7310]

@@piercedasian my favorite all time honda

[@piercedasian]

yeah I love the CRX. It rarely gets driven b/c I don't want some idiot to crash into me and send her to car heaven.

[@mrdudelove1]

looking sharp!

[@piercedasian]

Glad you liked it!

[@sutuvang]

can any1 thell if these will fit on Type R 2017? Type r and normal hatchback made in same flatform so that will great if these fit

[@piercedasian]

yes these are interchangeable between the Type R and the regular 10th gen hatchback.

[@otero915]

All u have to do is line the holes up with the bracket. Saves u time. U don’t really have to get all technical with it.

[@piercedasian]

Although you're partially correct that for someone that hasn't done the install before and only has 1 crack at getting the doubled sided tape on right that following the instructions provided by Honda is quite important. Yes the brackets can be lined up but only have you have them in the relatively correct position to start with. It definitely isn't rocket science but doing it right like a pro means following instructions to the T. The funny thing is earlier this week someone brought their very car and visor to me to fix their screw up b/c they said to me "I just stuck it on but I can't line the holes up quite right. Admittedly his install was a bit of a disaster and I spent a good portion of my time ripping off the visors from his car, removing all the crazy adhesive tape and then reinstalling the visors for him the proper way. Suffice to say it cost him MORE to have me do the job b/c of all the rework and fixes I had to do to get things lined up properly and stuck on right.

[@sorigo]

@@piercedasian I hate the stick on double sided tape on these accessories! that's why I prefer Weathertech's visors that dont require this tape for the front visors install ...

[@piercedasian]

yeah the sticky tape does truly suck especially when you gotta take them off for whatever reason. This is why you gotta get them right the first time so there is no room for screwups. My install vid might be a bit neurotic as fas as details and install goes but if you knew you only had one chance to get them right, one would be wise to be safe than sorry. But yes, weathertech's attachment system is so much better.

[@imjustfonzie3771]

Was that 100A or 101A

[@piercedasian]

101A

[@acidraindrops6657]

14.5cm or 14.5mm genius?

[@piercedasian]

Poindexter I believe it is 14.5cm from the start of the window edge where the first window visor retaining clip goes.

[@SuperSuperRaza]

The video is not clear.

[@piercedasian]

that's b/c when you watched it that it literally just uploaded and youtube didn't have a chance to transcode the video at higher quality levels. It should be good now.

[@SuperSuperRaza]

Ok it's good now.

[@piercedasian]

good to know :)

[@jasonking8671]

Great video and sick car..

[@khallilbelle4038]

👍🏼👍🏼

[@piercedasian]

Thanks.

[@sorigo]

just bend this tape out and fold it...

[@piercedasian]

Lol I hate explaining things on video. Sometimes my brain wanders or I can’t find the right words to explain it like a user manual.

[@M0nk3yButtt]

I called Honda they gave me a $215.00 not including taxes here in California. Anyone know of some other websites that might have them for a more reasonable price without getting cheap quality?

[@piercedasian]

you can also try Majestic Honda. Even though I"m in Canada that I have purchased stuff from Majestic as their service and prices are quite reasonable.

[@sorigo]

weathertech.com

[@Notafanlol]

lizz A well visor are very good Quality Just look it up as well visor on google

[@Nickey6478911]

cariD.com 57 bucks