2016 Pro4x 6inch lift on 35s

Taking in the View

[@St.Irenaeus]

Looks great man. Frontier gang!

[@brianclark2790]

Nice ride!!!

[@HotSneks]

Clean. Very clean.

[@tommypearson9260]

Thank you Brother!

[@espososacevedo]

Wow

[@chefgiovanni]

Your truck looks awesome. From past exp., I know that your speedo will be off true speed. Tell us more......

[@tommypearson9260]

For sure even with Gear changes the spedo is pretty off but at this point i just accepted it and seems to be pretty much close to stock fuel

[@photodavem70]

Nice truck! What grille guard are you running?

[@tommypearson9260]

Tac grill guard Amazon. Com type in your year and it will bring it up

[@King_TuTT]

do you feel that you lose a lot of power with those big ass tires? truck is kinda slow as it is at least in my opinion.

[@tommypearson9260]

I re-did the gears on 4-10s use a pedal commander plus changes to the intake and exhaust system it would definitely be a dog also it's a six speed manual if it was auto I would probably be burning a lot more cars the torque is insane when you need to get going i can tell you I'm creating almost 3000rpm 4th gear at 50 mph should tell you it's a little better than stock

[@themouas]

Did you have to trim your wheel wells or fenders?

[@tommypearson9260]

Tons all the way to the pinch weld those 35s no joke

[@davidmorello676]

TOMMY...THE TRUCK LOOKS SWEET...I DIG IT.

[@tommypearson9260]

Thank you for the love ,I dig it too =)

[@moneyshift8919]

What size rims

[@tommypearson9260]

@@moneyshift8919 16inch

[@truenorthcanadian]

Just stumbled upon your channel love your truck! Absolutely Sick! Been thinking on getting a pro4 myself. Cheers 🍻

[@tommypearson9260]

Much appreciated brother 👍

[@gabrielpiero2082]

@@tommypearson9260 Hello 👋👋👋👋

[@julius8125]

Where did u get the lift kit?

[@tommypearson9260]

CarID.com Fabtech 6 inch lift kit with stealth shocks you can get the regular one's that come with it but i would suggest getting the stealth or get their Coilovers Shocks

[@patricksanders6476]

The little bit of research I've done so far, a lot of the manufacturers of these lift kits specifically say they don't fit on pro4x. I'm referring to rough country and supreme suspensions particularly. Is this inaccurate in your experience?

[@tommypearson9260]

Yes it's a lie the problem is it isn't popular as it is for Tacomas and Chevy etc. My kit is made by Fabtech they're pretty legit. Calmini is another brand you also have RC which is the cheapest of them all. Also you can add Fabtech on top of a Titan swap if you want max lift.

[@brylepaulino3469]

What brand are those tires and rim size?

[@tommypearson9260]

Falken Wildpeaks 16 inch wheels XD Heist on 315 /75 /16

[@bayareakat66]

​@@tommypearson9260 what's your offset??

[@tommypearson9260]

@@bayareakat66 Man i am sorry for not replying right away Negative 30 with 2-1/2 inch Billet Spacers

[@jacobponte5713]

Nice frontier! Was wondering where you got the bed cover at?

[@tommypearson9260]

It came with the Truck ,The name is Extreme Cover 2 I never looked it up but i am sure you can find it . It's a hard cover it folds into sections and has clips to hold the fold in place it's quick to put on and off through the built in railway system .

[@jacobponte5713]

@@tommypearson9260 appreciate it !

[@mr.skeptical3071]

Are u thinking of re gearing to get u back to stock?

[@tommypearson9260]

I did recently and it's loads better

[@mr.skeptical3071]

Did u have to re gear the front diff too? In 4x4 wouldn't this not work if you don't??

[@tommypearson9260]

@@mr.skeptical3071 I did the front and rear 4:10

[@Kike0226]

Recently I try to lift my 2016 pro 4x but they told me the is not way you can find 6 inches in this model just 2 inches level kid how do you find 6 inches for nissan pro 4x and where do you purchase thanks

[@tommypearson9260]

Fabtech makes 6inch kits so does Calmini the people that tell you this probably are clueless my trucks been lifted 3 years now.

[@johnnyhernandez6067]

Fabtech website doesn't sell for the 2016 model wonder why

[@Daniel5Foot7Ninja1]

Where was that at?

[@tommypearson9260]

Wrightwood off the 15Freeway Southern California

[@Daniel5Foot7Ninja1]

@@tommypearson9260 cool thanks. I’m about 2 hours from there. I’m look for place to do some off roading with my frontier .

[@deoxysx1657]

Awesome Frontier bro enjoy it 💪🏾

[@tommypearson9260]

Thank you Brother!

[@themanthelegend7048]

Is this the rough country 6" lift?

[@tommypearson9260]

Fabtech 6 inch kit. More sturdy and durable. At the time I bought my kit RC kits were rust prone I think they fixed them by now but RC was known to rust and break six months in use

[@Dbruening]

What lift did you use?

[@tommypearson9260]

Fabtech Basic lift with Stealth Shocks in the Rear 5150 Bilstiens in the front, I can also crank my struts up a couple more inches for a 8 inch lift but would rather have more travel than lift 6-1/2 with 35s is good enough

[@Dbruening]

@@tommypearson9260 Thanks for the info. I have an 18 P4x that I want to lift and didn't want to go the RC route.

[@tommypearson9260]

@@Dbruening Very smart move even though the kits are better made it's still a cheaper quality option. I don't knock guys who use it but i know people who have them on other trucks and all say it rides like shit so with that being said you get what you pay for 100%

[@vinnymac01ss]

I did the 6-in rough country lift kit 33.5 on 20s I can't get over 65 mph. I know you said you had a manual but do you have any issues getting over 65mph? Also if you upgrade the gear ratio would that affect anything?

[@tommypearson9260]

I never had that issue plus I changed my gears to 4:10s even before that I never had that issue also use a pedal commander. I would look into why you're stuck at 65mph there's no governor I be doing damn near a 100 on 35s

[@tommypearson9260]

Maybe Its your rim size mine is 16 inch rims that maybe the issue

[@vinnymac01ss]

@@tommypearson9260 well thank you for the response I am going to be looking into a very soon. I am running 20" rims on 33.5

[@kenarnold1403]

Sharp!!

[@luisadalbertochuaenriquez7274]

Hi wich lift recommend for frontier pro 4x 2015

[@tommypearson9260]

Fabtech lifts Cal-mini lift Rough Country go with the other two over RC

[@luisadalbertochuaenriquez7274]

@@tommypearson9260 can you send me link i want this kit

[@rapathyman]

Did u have to do any trimming anywhere?

[@tommypearson9260]

Yes lots of trimming front and rear fender wells cutting some of the pinch weld area my other videos you'll see where I cut

[@praserttantana5057]

Nice looking truck. Is it AT or MT ? Any issue with the gear?

[@tommypearson9260]

6 speed manual no trouble with the gears it's 3.69 ratio 3.7 but hopefully soon i am moving up to 4.10's

[@mr.skeptical3071]

Did u do the titan swap?

[@tommypearson9260]

No titan swap all stock axles with 4:10 gears

[@MeliorIlle]

Bye bye mpg

[@tommypearson9260]

🤣🤣😆😆

[@jthondacrf8926]

That looks bad ass

[@tommypearson9260]

Thank you!

[@DustinMoffitt]

What did this kind of set up drop your MPG's too?

[@tommypearson9260]

12-City 18-Hwy but i also drive with my foot in it if i relaxed it would definitely be higher but it's just so fun to drive that way especially using a Pedal Commander too!

[@DustinMoffitt]

@@tommypearson9260 well shoot that is just barely better than my stock 2008!

[@tommypearson9260]

@@DustinMoffitt These are Hwy trucks the only way to build mpg city driving no matter what tanks it big time

[@jma0612]

Any trimming to fit the 35s?

[@tommypearson9260]

Lots of front trimming and trimming behind the well cover. Meaning take off the well cover and trim it back by the driver and passengers doors because if you don't you won't be able to turn the wheels or they'll rub you don't want that plus getting a rolling alignment or if can trim enough a regular alignment will do to

[@jma0612]

@@tommypearson9260 thanks!

[@isaiahchisolm2044]

That's a sick truck!! Is there still any rubbing after the trimming you did? Also, how's the ride quality?

[@tommypearson9260]

No really just on certain angles but not much to worry about

[@isaiahchisolm2044]

@@tommypearson9260 love it!

[@thinkcreate5596]

What all did you have to trim I'm suppose to go in a fee day for install but may want to go to 33s