2016 RZR XP1K4 | Shock Tear Down

[@ChuckWood]

Great vid! Thanks for the info, rebuilding mine soon.

[@j.a.s.o.n_h.e.s.s]

Awesome!! Thanks

[@trentonbriones2381]

Very good informational video. Thank you for sharing your knowledge

[@benbeighey316]

Would love to see a rebuild too.

[@FreedomIsntFree2023]

Curious why not to clean the tubes with a contact cleaner or similar product? Maxima makes Suspension Clean which is specifically for this purpose. Having just completed this job and given how dirty the internals were, swabbing with a rag would not do a very good job. In any case...looking forward to hear as to why not spray the tubes? Thanks!

[@navycranes]

Would love to see the assembly video.

[@j.a.s.o.n_h.e.s.s]

Sorry for the delay.. I'll start editing next week.

[@hjfcoco]

Where can i get the tool to remove the floating piston and the one to release the nitrogen? Also what fluid where you using on your solvent tank? Id like to clean mine like that. And change the oil. Thanks in advance

[@Nun3zDanny3]

I just got some of these exact shocks for a project but the top adjustment collar is stuck. How would you go about fixing it?

[@justenfarnsworth625]

I got one that seized up What do you recommend doing I can't find your video Of the one that seized

[@tonynguyen5641]

Nice video

[@normogaard1]

I broke the lower shock bolt retainer on the end of the shaft where it bolts to my RR trailing arm. When my Super ATV Boxed Radius rods failed and lower hub let loose twisting my Trailing arm and snapping my shock bolt tab. Can you buy just that bolt tab and is it Threaded on the end of the shock Ram? They are Walker Evan Shocks on a 2018 RZR XP 4 Turbo.

[@randallsprouse8229]

so can you just change the ear that bolts up at the bottom of the walker shock

[@j.a.s.o.n_h.e.s.s]

Are you talking about the lower rod end?

[@youronlyhereoncebigcat5310]

I just got a velocity,and noticed one of the rear shock resivors is not in line so I can't get a limit strap on it.can I turn it to get room?

[@j.a.s.o.n_h.e.s.s]

Is this on a Turbo S?

[@jonathanduarte4343]

what tool is that to take out the piston in the reservoir?

[@FreedomIsntFree2023]

Just for others to see, as I'm sure you've got it handled, that is a IFP removal tool. Or....if you have available, it's just a 1/2x20 thread. I used an 8" 1/2x20 bolt with a jam nut/coupler on the end to thread onto the IFP. Worked great!

[@austinnorth4710]

Where did you get the tank and gauges?

[@j.a.s.o.n_h.e.s.s]

Kar-tek Offroad

[@gerardoortiz2001]

Cuántas libras de nitrógeno lleva el amortiguador delantero y amortiguador trasero?

[@brianchesser1463]

Do you have a video of putting them back together and what psi does the gas need to be sit

[@j.a.s.o.n_h.e.s.s]

Yes..... Coming soon!

[@tonynguyen5641]

@@j.a.s.o.n_h.e.s.s is it still coming? Or can you tell me where to get rebuild parts

[@j.a.s.o.n_h.e.s.s]

@@tonynguyen5641 Hi Tony, I’ll have the video completed next week 👍🏼

[@tonynguyen5641]

@@j.a.s.o.n_h.e.s.s can you atleast put part list and where to buy so I can order now please

[@j.a.s.o.n_h.e.s.s]

@@tonynguyen5641 www.schmidtyracing.com/

[@BullittOutdoors]

How much oil should I purchase to rebuild 4 RZR shocks?

[@j.a.s.o.n_h.e.s.s]

4 Liters or a Gallon.. Use a full synthetic