2016 to 2018 chevy malibu headlight assembly replacement

[@wtf3494]

wish you showed it that’s why we clicked

[@timmer9lives]

Thanks for posting. Not much out there on KZbin for later model GMs. Even though I have an Impala, your video answers my question. Gotta pull the entire front off. Thanks again.

[@vibescold906]

Your welcome definitely a pain

[@rickypeters569]

Can you do a video on how to change the fog lamp assembly on a 2018 Malibu please

[@courtneywhitehouse7577]

Where did you find the headlight for cheaper? I’m trying to find a reasonably priced left side one.

[@vibescold906]

Hello they were purchased on Amazon. U can find pretty good aftermarkets now for a lot cheaper then what I paid for theses couple years back.

[@e-locs2497]

Does the bumper need to be removed to replace the driver headlight lamp?

[@vibescold906]

Yes unless u have another person with u that can hold the bumper driver side out while u get to the bottom bolt that's covered if the bottom bolt plastic part is already broken u can go to the fender well remove the skirting and can get to it that way

[@Mrfixitmarty]

Pretty sketchy video. Some good info, but I fear tackling this on my own. To replace just one side, must you still remove the entire bumpers, or can you just ease them away to install? Also, I can't remove the round access plate to the headlight lamp. It seems permanently stuck on!

[@vibescold906]

You can just gotta be careful and u would have to change whole headlight

[@vibescold906]

Also I recommend go in from the finder wheel I take a pair of curved needle pliers and get the pliers in the groove and turn if u need me to make a video let me know I'll show the 3 ways to do it the one I was saying is a little easier then the others less removal lol

[@griggyz]

great vid, exactly what i was looking for, thank you! what a pain in the ass though haha.

[@vibescold906]

Thank u and yea it was a pain when it came to removing the bumper mainly the middle lol now u can remove the headlights without full removal of the bumper just gotta have plenty of light and stuby ratchet lol

[@taybeauty465]

Do u know how to put a fender on this type of car ?

[@vibescold906]

Alot of theses newer cars are a pain to change out body panels. Look up the chevy malibu forums there's usually a video or a info on how toos if I can't ever find any I just search parts or replacement screws for that specific panel or part I'm wanting to change that will give u a good idea on how difficult it will be or what to look for on the car! Thank u for the comment

[@jackiecurtin3500]

anyone on here that actually shows you how to remove

[@vibescold906]

U can always go onto the chevy malibu forum and download the step-by-step instructions

[@OPGAMER-zx9uu]

@@vibescold906where do you find the chevy malibu forum ?