2017-2019 F250/F350/F450 Rear Block Install *Leveling Kit*

[@jasoncox2132]

I personally like a little rake. Before my lift I had 3” rake! Way too much! I also have Diamond Steel replacement bumpers. So the front definitely lowered. I went with a ReadyLift level kit in the front and 4” blocks in the rear. Now I’m just over 1” of rake. Perfect look for me! But like you said, it’s all about you brother. Can’t wait to see the new bumper!

[@MotorHead18]

Ooooooo 3” of rake!!! haha I bet your truck is looking solid. Stay tuned for the bumper, your going to like it

[@jasoncox2132]

@@MotorHead18 Yes sir! Looking real solid after the 37/13.5’s went on her last week! 😁

[@MotorHead18]

@@jasoncox2132 BIG MEATS

[@benjytheframer2781]

For those who experience vibration on the axel, the pinion will line up if you use a tapared block, i had that problem i fixed it with a pmf square block, they sell it with a shim to center your axel on the wheel wells with out that shim, you will get rid of the vibration but your wheels wont be centered, i got a 3.5 level kit from rwady lift it came with a 4 in tapared block but the truck not only vibrated but looked aquated pmf 5 in block raised the back probably 1/2 in on the back but looks way better

[@paul91103]

Ya dun good with this mod, soldier!! The rig is kickin’ butt big time. Bravo Zulu!

[@MotorHead18]

Thanks 😎

[@DouseAHouse]

Truck looks great,I recognize that parking lot,I live in the area.

[@MotorHead18]

Thanks brother!

[@Pearson_vii]

Cjc makes a really clean Ford bumper. 👍🏻

[@MotorHead18]

I’ll check it out

[@kylec9457]

Nice truck. Looks perfectly leveled with that new block in the rear! What size tire and wheel are you running? And what for offset are your wheels? Thanks and keep up the great videos!

[@MotorHead18]

37x12.5r17. 17" black steelies

[@j-man2567]

Looks Great! What Center Caps did you use for the Steelies? Looks like they are sold separately.

[@MotorHead18]

Didn’t use any center caps

[@j-man2567]

@@MotorHead18 Ahh, I see. Thanks for Quick Reply Bro. I've been searching for some wheels for my 2019 F250 and couldn't decide BUT This set up seems to be the Best for what I'm wanting.

[@edgaroandrade855]

What leveling front ? And what rear ?

[@bris9984]

Can you do a video on death wobble for this trucks and what to do or prevent it caster alignment balance suspension.

[@MotorHead18]

I don't have the specific knowledge on the topic but from my research, many track bars are at fault. That is if every suspension part is in decent shape.

[@bris9984]

@@MotorHead18 I was getting death wobble on mine and went to ford and they changed the steering stabilizer for free and it fixed my problem!

[@MotorHead18]

@@bris9984 glad to hear! Hopefully it never comes back

[@willb7975]

Great stance ... suggest a Ranch Hand Bullnose, personal preference.

[@MotorHead18]

I love me some ranch hand 🔥🔥🔥

[@corbinfairweather]

Sweet setup. I think I’m going to stay stock on my truck, maybe a level or just more aggressive tire. Love the look tho!

[@MotorHead18]

Right on brother! Stay tuned!

[@rjkusse]

Any issues since adding them?

[@MotorHead18]

Not at all

[@dirtpicasso]

Looks good man 👍

[@MotorHead18]

😎

[@tristianolivares1202]

So I just bought a 18 SD, it have a 3 inch leveling kit on the front but I believe the rear block is a 5inch block? I like the look is yours . Should I buy a 3 inch rear block to have my front just a smidge higher on the front?

[@tristianolivares1202]

You have a 4inch rear block and what do you have on the front as far as a leveling kit?

[@luismarquez5017]

Can you still install airbags with a 4” block

[@MotorHead18]

I plan on it

[@alpinweiss]

Does an 2019 XLT have some blocks from the factory?

[@MotorHead18]

Yes sir!

[@diegorebuck7260]

Ranch Hand midnight series bumper!

[@MotorHead18]

I’ll check it out

[@kevinA1973]

Looks nose high?

[@MotorHead18]

Your right. Just a tad through

[@kenj.8897]

Looking 👍

[@MotorHead18]

😎 thanks bro

[@Dmkpit401]

those new ones junk put them in they are cast and they split have hair line cracks in both had to buy steel fab from another place and why in gods name would want the rear lower looks like its shitting itself and its not loaded and you can tell very easy and you cant chang just front bumper need to do both and toss those steps cant do one n not the other i have both heavy duty bumpers and dont change hight at all

[@zIHated]

Let me buy your bumper 🤷🏼‍♂️

[@MotorHead18]

I change my mind too often! lmao